Results for
Spain
Image engineers are increasingly doing more research to create new systems in the audiovisual language and thus be able to tell their stories through camera movements that are increasingly impressive. A great example is the hot head, which can be a magnificent tool, since it has an unbeatable capacity to be able to carry out the most perfect movements in all three axes. At Camaleón Rental we offer you the best models with hot heads and we advise on renting them during your shoot so that it comes out as perfectly as possible.
Request for a quoteGermany
The highlights at a glance Manufacturer: Alumero Manufacturer item no.: 9159990 Article No.: MO-534 Stück is VPE: 100 is Carton
Request for a quoteGermany
Universal adapter piece for cameras on our articulated arms With standard ball joint for connection to camera thread 1/4" UNC, with cable feedthrough for camera cable or power supply. Cables can be laid through the articulated arm. Weight with spherical head: 100 g Weight without spherical head: 50 g Material: Adapter: Fine grade polyamide PA2200 Ball head: Alumiium Universal adapter piece for cameras on our articulated arms With standard ball joint for connection to camera thread 1/4" UNC, with cable feedthrough for camera cable or power supply. Cables can be laid through the articulated arm. Weight with spherical head: 100 g Weight without spherical head: 50 g Material: Adapter: Fine grade polyamide PA2200 Ball head: Alumiium
Request for a quoteGermany
• Mold measurements up to 4 x 2 x 1 m • Does away with elaborate and expensive mold set-ups • Short throughput time (a few days) • Sand molds correspond 1:1 with CAD model • Structures can be designed in accordance with requirements, without having to watch for draft angles or undercuts • Special sands prevent casting problems • Surface quality can be adjusted through use of different sands • Coarse-grained sands for high gas permeability • Considerable flexibility with changes in geometry, without additional expenses • No storage or maintenance of patterns • Cost savings particularly for complex molds and batch sizes of 1 to several hundred pieces
Request for a quoteGermany
Simply headed articles (screws and bolts) with diameters ranging from 1.5 to 6 mm and a length of up to 650 mm. Possible materials: Regular steel, stainless steel, brass, copper, light metals. Available with all standard surfaces.
Request for a quoteFrance
Ball-end thrust screws with full ball are used when a clean, polished contact surface is required.
Request for a quoteFrance
The Hygienic DESIGN fastening system was specially developed for use in food processing facilities. Special attention was paid to the cleaning-optimised geometry and a surface finish of Ra ≤ 0.8 µm. The quick and easy installation due to a pre-installed sealing washer rounds off the overall package.
Request for a quoteFrance
Universal fastening element. The hammer-headed screw is twisted into the profile slot and so can mounted into an existing systems at a later date. The serrations break through the anodised film and creates a secure, electrical conductive connection.
Request for a quoteFrance
Ball lock pins are used for easy fastening or joining of components. The two balls are disengaged by pressing the push button and the pin can be slipped into holes in the workpieces. When the push button is released, the balls lock the connection securely. Shear force double shear (F) = S · τ aB max. The values given for the shear force are the theoretical breaking load. These are non-binding reference values without consideration of safety factors and exclude any liability. The values given are for information purposes only and do not constitute a legally binding assurance of properties. The load values have been calculated in accordance with DIN 50141. Each user must determine individually whether the ball lock pin is suitable for the respective application. Different materials in which the ball lock pins are used, weather conditions and wear can influence the determined values.
Request for a quoteFrance
Steel grade 8.8, black. Stainless steel A 2-70, bright. Drawing reference: L2 = approx. 2x thread pitch
Request for a quoteFrance
The floating joint unit is a bolt for connecting two components, that permits a desired movement of those components in relation to each other. The floating joint unit is mainly used when: a temperature change alters the dimensions of a component assembly inaccuracies occur manufacturing tolerances must be compensated for the position of the components varies due to dynamic loads
Request for a quoteFrance
Ideal elements for fastening cladding panels, Plexiglas covers etc. The oversized flange and the thread undercut ensure a stress-free, uniform force distribution on the respective surfaces. Projecting edges are kept to a minimum by the head height being kept as low as possible. An open-end spanner is used to screw the fastener in. The surface of the ball head screw is polished and, with regard to design optimised for the use in hygienic environments. The surface is polished to a surface finish of less than Ra 0.8 µm. Dirt and residue from products or cleaners seldom adheres and easy cleaning is ensured.
Request for a quoteFrance
EN ISO 7380-1 Form A: Hexagon socket button head screws. EN ISO 7380-2 Form B:Hexagon socket button head screws with collar.
Request for a quoteFrance
The surface of the hexagon head bolt is polished and, with regard to design optimised for the use in hygienic environments. The bolt head is convex on the top face and the collar has a conical formed top surface. Instead of troublesome embossing or indentations, the bolt head is smooth with a surface finish of Ra 0.8 µm. Dirt and residue from products or cleaners seldom adheres and easy cleaning is ensured.
Request for a quoteFrance
Form A with full ball is used when a clean, polished contact surface is required. Surfaces which are not flat and parallel can be firmly clamped or supported with Form B with flattened ball, the movable ball can adapt itself up to 9°. Drawing reference: Form A: full ball Form B: flattened ball Form BV: flattened ball, rotation lock Form F: serrated flattened ball Form FV: serrated flattened ball, rotation lock
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
Turkey
ENGINE MODEL F2CFE613L A026, F2CFE613C A011, F2CFE613N A010, F2CE9684E E017, F2CFE613C B004, F2CFE613N A011, F2CFE614G B002, F2CFE613C B006, F2CFE613R A021, F2CFE614G B003, F2CFE613C B041, F2CFE613S A020
Request for a quoteGermany
Manufacturer: Alumero Manufacturer item no.: 9159990 + 1534308 Article No.: MO-787 Stück is VPE: 100 is Carton
Request for a quoteGermany
High pressure force thanks to the large contact surface and good power transmission thanks to the Torx mount. Fast assembly without pre-drilling.
Request for a quoteGermany
suitable for slate roofing thanks to its straight and flat design. Please note that work on slate roof
Request for a quoteKazakhstan
The main purpose is to attach materials and equipment to concrete, natural stone, and brick. This is a simple and quick installation, namely: it is installed in a pre-drilled hole corresponding to the diameter and length of the anchor; it is wedged with a spacer cone when screwing into the anchor: a metal element (bolt, stud).
Request for a quoteGermany
Material: PEEK Colour: light brown - Temperature: max. 180°C - High-strength and excellent form stability - High modulus of elasticity and excellent creep resistance - Resistant to many chemicals - Flammability rating: UL94 V0 - Further PEEK products: series 280 to series 285
Request for a quoteGermany
Material: PEEK Colour: light brown - Temperature: max. 180°C - High-strength and excellent form stability - High modulus of elasticity and excellent creep resistance - Resistant to many chemicals - Flammability rating: UL94 V0 - Further PEEK products: series 280 to series 285
Request for a quoteGermany
Material: PEEK Colour: light brown - Temperature: max. 180°C - High-strength and excellent form stability - High modulus of elasticity and excellent creep resistance - Resistant to many chemicals - Flammability rating: UL94 V0 - Further PEEK products: series 280 to series 285
Request for a quoteGermany
FRIMO PURe Mix mix heads are available as two-component or multiple-component mix heads for various PU product manufacturing. Different sizes for the smallest and the largest output rates are available. FRIMO offers a patented PU spraying system for the production of high quality PU surfaces, such as for automotive interiors.
Request for a quoteAustria
For every material and production stage the right cutter head and attachement!
Request for a quoteResults for
Die heads - Import exportNumber of results
57 ProductsCompany type