Digital controller - Import export

Mecanic Systems, wishing to supply semi-finished and finished items, has equipped itself with several digitally controlled multi-purpose hydraulic bending machines (stamp + V). These guarantee the production of a vast range of items with a maximum length of 3,000mm. The tolerance for these operations is +/- 0.1mm per bend. Unfortunately, we cannot coil with this type of machine, but we can achieve facet folding (small bends every 5 or 10mm to arrive at the required radius). A sketch or a drawing is all that is needed for a positive or negative reply to bending with our equipment. For special bending requirements, a tool could possibly be designed for you.

The VIKING-500 PRO semiautomatic welding machine has two-piece design, is designed for power supply from a three-phase 380V network and produces 500A at a load of 60%. The design feature consists in a separate feeding mechanism that can be removed from the source to a control cable length of up to 15 meters. The device heats up the product to a minimum, which allows you to work with thin metals. An important feature is the presence of a two-shaft motor for the wire inch (four rollers), which significantly improves the stability and smoothness of the welding material feeding. Special software functions significantly increase the performance factor of the device. ... Key features of VIKING MIG 500 PRO: - digital control of the device; - advanced software settings; - dot welding mode 2T and 4T; - setting of a smooth drop of the termination current; - adjustable inductance; - forced gas purging; - forced wire inch; - the presence of a 36 V socket (for connecting a CO2 gas heating regulator

The EPOS2 24/2 EC is a modular digital positioning controller. Matched with brushless EC motors with Hall sensors and encoder up to 48 watts.

The EPOS2 24/2 DC/EC is a modular digital positioning controller. Matched with brushed DC motors with encoder or brushless EC motors with Hall sensors and encoder up to 48 watts.

The EPOS2 P 24/5 is a freely programmable positioning controller according IEC 61131-3. Matched with brushed DC motors with encoder or brushless EC motors with Hall sensors and encoder, from 5 to 120 watts.

The EPOS2 70/10 is a modular digital positioning controller. Matched with brushed DC motors with encoder or brushless EC motors with Hall sensors and encoder, from 80 to 700 watts.

The EPOS2 24/5 is a modular digital positioning controller. Matched with brushed DC motors with encoder or brushless EC motors with Hall sensors and encoder, from 5 to 120 watts.

The EPOS2 Module 36/2 is an OEM positioning controller plug-in module for brushed DC motors with encoder or brushless EC motors with Hall sensors and encoder up to 72 watts.

The EPOS2 50/5 is a modular digital positioning controller. Matched with brushed DC motors with encoder or brushless EC motors with Hall sensors and encoder, from 5 to 250 watts.

The DEC Module 50/5 (Digital EC Controller) is a 1-quadrant amplifier for controlling EC motors with Hall sensors with a maximum output of 250 watts.

The DEC Module 24/2 (Digital EC Controller) is a 1-quadrant amplifier for controlling EC motors with Hall sensors with a maximum output of 48 watts.

Innovative 3level rectifier and inverter conversion technology Digital Control Technology (DSP Control) Low input THDi (<3%) Ultra high efficiency High input power factor (> 0.99) Intelligent battery management

IGBT PWM rectifier and inverter technology Digital Control Technology (DSP Control) Low input THDi (<3%) High input power factor (> 0.99) Intelligent battery management Installing UPS in parallel for up to 8 units

The FORA 33 series UPS uses leading technologies that ensure high performance and reliability two highspeed digital signal processors (DSPs) with full digital control for high power quality, high input power factor and low input current distortion.

3stage rectifier and inverter conversion technology Builtin load galvanic isolation transformer Low input THDi (<3%) Digital Control Technology (DSP Control) High output power factor 1 Intelligent battery management Advanced communication capabilities Parallel installation of up to 8 UPSs Robust and reliable design

FORA 33 TP series threephase UPS with builtin transformer are manufactured using advanced technologies that ensure high performance and reliability two highspeed digital signal processors (DSPs) with full digital control for high power quality, high input power factor and low input current distortion. Built in Areas of use

The MODULE K series is a scalable, redundant modular UPS system designed to provide cost effective high availability of energy for high density data centers and mission critical applications. Online double conversion UPS with advanced digital control. The modular architecture allows power and battery life to scale as demand or availability increases. Combination of modular design with N + X parallel redundancy technology. The maximum capacity of a single UPS is 625 kVA. The UPS can be operated in parallel to build a system up to 2500 kVA.