Robotics - Import export

Hygienic version, wash down 3- or 4-axis execution Top mounting Work range: 1200 mm Payload: up to 3 kg

Ideal automation solutions for loading and unloading of parts on machining centres, presses, measuring stations, etc… Convenient, accurate, repeatable and reliable! The CLA Robot Cell is composed of the following: - A polyarticulated robot or scara with specific grippers - A camera device for part recognition - Automatic camera calibration - Parts loading/unloading system - Protection (cage, mats, detection, etc) - Each application is studied and simulated in order to define the ideal solution - Microplates screening. CLA is a center of expertise of Mitsubishi robots

"for workshop or construction site allows you to Transport, Handle, Turn over any glass surface from floor to ceiling. It can be used with our EV 300 electro-pneumatic lifting beam. Very compact construction. For very easy transport on site, it is possible to assemble it on the site of use"

Automatic station for rate control of watch movements or watches without straps - Measure at 0 and 24h - Integrated 24h Storage - Possibility to add measuring devices - Power reserve control e.g. 72h - Using a robot - Multi-calibers

The CLA multi-calibers chronometric Cell is used to monitor and tune the performance of a mechanical watch movement or a watch.

Translation-rotation unit - Adjustable speed - Simple and accurate positioning - Compact - Simple installation - Light

CLAremontage Automatic station which wind the movement by the rotor - Loading/unloading unit inserts - Independent station or integrated in an SMS line - Multi-calibers - Winding mechanical watches

To meet the growing and increasingly complex demand for machine vision systems, CLA has developed the CLAsight® solution. It is a package consisting of hardware (frame, camera, optics, lighting and industrial computer) and a versatile vision software application for positioning, aesthetic or dimensional inspection, time measurement by direct reading of hands, dial and date, and optical character recognition (OCR). Adapted to your needs, it will be the eye of your robot or the controller of your parts. Application example : - OCR Vision system - Reading of the hands of a movement or a watch - Aesthetic inspection - Positioning of microtechnical parts

The CLA low vibration XY table enables to perform movements on the X and Y axis through Ethernet commands. This equipment is ideal for micro plate analysis by camera. Specifications: - Micro plates dimension 130X90mm - Motion control in position by Ethernet protocol - Configurable motion speed and acceleration - Accurate and vibration-free positioning enables optimal reading - Optional vibration of micro plates in reading position to agitate the liquid

Electric gripper with 4 fingers. - Power and speed control - Compact - Accurate - Silent Gripper PE410A is controlled. Hence it is also possible to control the opening position of the gripper.

Automatic screwdriver with torque measurement Compact station for workbench to ensure your assemblies screwed with high precision torque control. Main features : - Screws feeder by vibrating bowl - Preparation of the next screw in hidden time - Automatic screwdriver with integrated torque sensor - Preparation of the next part in hidden time thanks to the charging carousel - Removable precision tool to ensures a precise positioning and a multi-types parts management - User friendly interface allowing various screwing positions and configurations dedicated by type of parts - Ready to be integrate in assembly line

Automatic screwing station of watch movements - Translation and rotation enable access to all positions of the movement - Small overall dimensions - Automatic screwing system

Demagnetization station of watch movements - Independent or integrated in an SMS line - Small overall dimensions - Demagnetization

Manual winding station of watch movements - Control of the number of winding turns - Compact - Accurate - Silent - Ergonomic

XYZ Positioning table - Maximum gripping surface - Reduced drive inertia - Ideal for handling, positioning and storing

The mta OEM soldering robot for integrator can be used for semi or fully automatic operations of selective point to point soldering from above. Thanks to its unique concept, the OEM robot is delivered to the system’s manufacturer with a process guarantee. The OEM robot can be equipped with any of mta’s soldering heads: soldering iron, induction, microflame; except for the mta MLH45 laser head. The 3 or 4 axes of the OEM robot are fully programmable through the mta-MotionEditor software, including soldering parameters such as: Solder quantity, wire feed speed, preheating/postheating times, automatic tip cleaning cycle intervals and other parameters for each soldered point. With its flexible and modular concept, the OEM robot can be fully and easily integrated into a production line.

The TR300 is mta’s table-top soldering robot platform. This robot is purpose-built and standardized for semi-automated applications that require point-to-point soldering. The table-top platform is a cost-effective solution to automate existing hand-soldering processes without the cost of fully-automated systems. Automating the solder process has several advantages over hand soldering. It produces highly consist joints, improved quality, higher throughput, and it requires less skill and training than hand soldering. This table-top soldering robot platform is also ideal for applications where human dexterity is required to position the parts. This is because operators can load and unload the parts in offline fixtures to minimize machine downtime. Because the TR300 is a purpose-built solution, it can support any of mta’s soldering heads without compromise. The ball-screw axis and motors provide fast repeatable motion.

MRC500 soldering platform for robotic soldering from above is a free-standing machine cell. Our design engineers purposes-built the MRC500 for soldering applications then standardized the design. We purpose-built our own platform so we would not need to compromise functionality based on the limitations of third-party equipment. Standardizing the design offers three primary advantages. It is well-proven, available faster, and costs less than-off custom designs. Although the design is standard, it is highly flexible. We designed the mechanical structure to work with a wide range of process equipment, material handling, and guarding systems. In its basic configuration, the MRC500 is a free-standing, semi-automated machine. At the other extreme, we can outfit it with SMEMA conveyors, collaborative robots, turntables, and many other systems.

3- or 4-axis execution Top mounting Work range: 800 mm Payload: up to 1 kg

3- or 4-axis execution Top mounting Work range: 1200 mm Payload: up to 3 kg

Fast handling equipment is often used in processes where volumes can not be handled by one robot only. The product architecture of VELTRU has multi-robot systems in mind. Our customers may download the corresponding Application Notes describing further technical details from our FTP. VELTRU is able to offer its customer access to all three major concepts for multi-robot lines: Assortment configuration The assortment is where several different products are combined into one packaging, common for chocolate and confectionery applications. Each product is fed on an individual conveyor, perpendicular to the conveyor for the packaging. Parallel flow configuration In systems with one product type only, the products and the packaging are transported in parallel direction. If moving into the same direction, the last robot will have few products to fit into few cavities of the packaging. This typically leads to errors such as products not being packaged and packaging not getting completely fill

2-axis execution Top mounting Work range: y = 1000 mm, z = 300 mm Payload: to 6 kg For standard applications, VELTRU offers a toploading application ready to use. As all VELTRU applications, the open source PLC program could be adapted to specific customers' needs. For standard applications, the setup and commissioning can be done by interactive GUI only, without any programming. Contact us for more details!

The IMCU is a DSP-based controller suitable for a large spectrum of control applications. Its modular design includes: * common for all applications main board (MAIN), * designed for each specific application mezzanine (MEZZ) for as example sensor interface * range of power amplifier(s) (PA) (power linear, Brushless, step etc.) allows the user to match the IMCS precisely to the requirements of each motion control project. Once programmed with suitable and open source firmware, it combines in a single unit all the functions necessary to control one actuator(s). The IMCU is designed around reprogrammable (CPLD and DSP) and reconfigurable technologies allowing it to be tailored exactly to a particular requirement.