Testing software - Import export

With our software testing service, we help you improve the quality of your software products and identify potential bugs before they become problems for your customers. We work according to internationally recognized standards and thus offer you a high level of quality assurance. Trust in our many years of experience in the field of software development and let us help you take your products to the next level.

The TesTController 850 is able to process up to six measuring channels with a 24 bit resolution and further six channels with a 10 bit resolution. In addition, it can handle three measuring channels for incremental signals. For controlling of drives there are three regulations channels available, so that even complex combination drives are possible (e.g. force and torque control at the same time). The maximum control frequency is 1 kHz, the maximum measurement frequency is 50 kHz. This testing machine controller 850 may recognize sensors that are equipped with TEDS chips (Transducer Electronic Data Sheet acc.to IEEE 1451.4), read their properties and calibration data, and automatically calibrate them. Thus, these electronic units operate with dozens of different sensors, so that a complex recalibration is not required. All universal testing machines of the model series 106 - 114 are equipped with the TesTController 850.

Neo PLM is a Process and Product Lifecycle Management provider to pharmaceutical and biotech companies. The product suite substantially reduces compliance risk and product cost by enabling the transformation to a modular, process design-centric structure that spans the entire product lifecycle. Neo engaged Symphony Solutions in 2016 to implement needed QA processes to suit the complexities of the Life Science industry. Through the new QA system, Neo improved the flow and transfer of knowledge across all stakeholders and processes. The QA system radically improved overall product quality and the verification of new features and updates in particular.

An experienced, in-house team of test and analysis specialists stands for the peak of quality – product-specific and exactly as you, the customer, desire it. To ensure quality in serial manufacture early on and guarantee a frictionless start of production, test equipment is incorporated into manufacturing processes and automated production lines. Placement tests, checking the electrical and software functionality, launch tests – depending on your individual requirements and your component, we will develop a test strategy and tune the tests to fit with each other. Our comprehensive test development methodology accelerates processes running all the way to the delivery of your product and reduced testing costs.

Alongside the standard ICT/FCT process, we can also target every individual production stage for verification, as requested. Efficient inspection strategies and final functional tests are a fixed component of our quality management system. PRUFREX is a manufacturer of test systems and software. In close collaboration with our own test equipment developers, we manufacture beds of nails for the in-circuit test (ICT) and functional test (FCT), alongside test equipment and production aids. Using the entire range of available test procedures, we will develop a strategy that suits your product.

EC Calibration Bench for Torque Wrenches The EC Calibration Device for torque wrenches is characterized by high torque accuracy, an exemplary sensitive and freely programmable control of the servo drive as well as a simple and uncomplicated software parameterization. The system is just as suitable for the hard daily work for the examination of a large number of torque wrenches as for fastidious torque analyses in the QA laboratory. The calibration device provides the necessary metrological characteristics and driving procedures to accomplish tests according to EN ISO 6789 or other test methods. The operator is allowed to program his test procedures freely and conduct tests or calibrations automatically. The different measuring sensors were accommodated in a LED storage, which is equipped with approximation sensors, so that the operator uses always clearly the measuring sensor suitable for the test specimen. The software integration of the LED storage prevents possible operator...

The Perfect Database for the Control of Torque Tool Calibration Torque Tool Manager 4.0 software is calibration and certification specifically designed to work with System 8® and Torq-Tronics 2® Digital Torque Testers! It will fulfill your TS 16949 and ISO calibration certificate requirements far more cost-effectively than manual record keeping systems! Torque tool calibration requires attention to detail in every respect, and maintenance of records pertinent to all factors - as well as creating certificates of calibration for each calibrated item. When all of this can be automated the process becomes more efficient, less prone to error, and less costly to operate. Torque Tool Manager, used with SR digital torque testers, improves control and efficiency for almost all of the operations. Specifications and tester settings are stored in the software and downloaded to the tester exactly when needed. The technician is guided and supported by the software during the testing, and...

We plan, build and deliver turnkey test systems for electronic and mechanical components. For example, these are test benches for quality assurance, validation and production departments of companies in various industries. Our services include e.g.: - Development test benches - Life time test benches - End-of-line test benches (production) - Retrofit of existing systems (software / hardware) - Climate & temperature test systems - Leakage test benches - Software development LabVIEW, TestStand, Python, C/C++ (Embedded), Microsoft PowerBI, SQL - Electronics development - Mechanical 3D CAD design - Risk assessment and CE - Commissioning, service, maintenance at home and abroad

The D-Tect X-ray inspection software is completely developed by DÜRR NDT and is the perfect complement to all digital X-ray systems like imaging plate scanners and flat panel detectors (DDAs). DICONDE compliant The user can be certain that images can be viewed on any other DICONDE compliant system. All-in-one All functions are included: from image acquisition, image evaluation and report generation to data import and export. High performance GPU and multi-core CPU support makes D-Tect X extremely fast and efficient.

The system comes with four 42 megapixel cameras and a high-performance control unit. LED lighting including LED control is also included in the delivery. The entire picture of the image analysis is orthogonally calibrated. Characteristics: This system can meet the toughest requirements for the inspection of bipolar plates in various production stages. The system has been adapted to the high requirements of the inspection of bipolar plates. The image acquisition time of approx. 2,5 seconds with a resolution of 24 um is outstanding. Inspection with the high-resolution system cameras is carried out using the tried and tested modusAOI software. Test possibilities: Position and minimum thickness of the graphite coating in the central area Checking the surfaces that should not be coated Coating contamination (graphite/screenprint) Testing of a defined target contour in screen print Damage to the metal at the edge (balcony) of the workpiece

Merecs develops individual test systems for heat pumps, gas, fluid and water systems. Our engineers & fitters for electronics, installation technology and mechanics build the systems completely from one source at our location in Steinfurt. The systems are then delivered and commissioned at home and abroad. Our range of products includes - Development test benches - Life time test benches - End-of-line test benches (production) - Retrofit of existing systems (software / hardware) - Climate & temperature test systems - Leakage test benches - Software development LabVIEW, TestStand, Python, C/C++ (Embedded), Microsoft PowerBI, SQL - Electronics development - Mechanical 3D CAD design

EOL test stand for e-charging columns and their power electronics for the simulation of different electrical loads and mains fluctuations. The test stand has automatic contacting and achieves high test throughputs in end-of-line operation. Different variants of the power electronics of electric charging columns can be tested. On the software side, Merecs Engineering relies on NI-LabVIEW and NI-TestStand.

As an NI Alliance Partner, we use NI TestStand and NI LabVIEW for test automation. Python, C/C++ Embedded and Microsoft PowerBI can be used in addition. NI-TestStand is the industry standard test management software and is used by the developers and architects at Merecs Engineering with a lot of experience. We offer for example the following services: - Requirements analysis based on the DUT properties to be tested - Development of test cases in cooperation - Sequence development in TestStand - Intuitive custom user interfaces - Parallel testing of many DUTs & Badge Testing - Reporting (SQL databases etc.) - Trainings & Workshops Our developers hold the CLA (Certified TestStand Architect) and CLD (Certified TestStand Developer) certificates.

✓ Outdoor DC-UPS for extreme environments ✓ Protection class IP65 / IP67 ✓ Capacity 33Wh ✓ Robust aluminium enclosure ✓ Operating temperature range -20...+50°C ✓ Longlife LiFePO4 Battery ✓ Offers up to 6000 cycles ✓ USB interface ✓ Plug&Play - recognized as UPS by operating system ✓ Extended functionality by UPS.com configuration software ✓ Shock tested to EN 60068-2-27 ✓ Vibration tested to EN 60068-2-6 ✓ Preassembled mounting bracket ✓ Pressure compensation element ✓ Cable set included ✓ 3 years warranty The ruggedized DC UPS series UPSI-IP has been designed for outdoor and industrial use for extreme environments. The robust housing protects electronic parts according to protection classes IP65 and IP67 against jet water and temporary submersion as well as against dust and dirt. The µC-controlled DC-UPS is based on the proven UPSI-technology and features numerous protective and monitoring functions as well as an integrated reboot function.

Using a USB stick with your company's logo allows you to increase the visibility of your business among your different stakeholders. Add relevant files about your product and service offer to your device's memory. Digital catalog of products; Company portfolio; Management Report and Accounts; Test version of software developed by the company.

We design, manufacture, build, train and service The pellet production lines designed and installed by our company offer capacities ranging from 2 t/h to 20 t/h. The capacity achieved naturally depends on the number and power of the machines and equipment comprising the production line. Pellet production lines – the offer: •design (technical conceptual design, formal arrangements, technical documentation, manuals, cost calculation), •supply (machines, devices, measuring and control apparatus, control cabinets, and all installation materials), •installation (machines, devices, control cabinets, measurement, control and feed wiring, post-installation testing, acceptance measurements), •software (controllers, operator panels, visualisation and control systems), •commissioning (machines, devices, control cabinets, control and power installations), •training process operators, programmers and IT technicians and technical human resources, •service within the warranty period and beyon

The PowerTest is a sophisticated testing and encoding system for chip modules on 35 mm tapes. Maximum flexibility allows versatile use: It can be used by card manufacturers for the incoming inspection or encoding of chip module tapes, and with integrated disconnect station by module tape manufacturers as a quality measurement system for the inspection of outgoing goods. Testing of contact, contactless and Dual Interface IC modules can be executed with the highest performance and yield by processing of up to 128 modules in parallel. In addition to basic test and parameter test, software is also available for chip module initialisation, personalisation, and OS loading. Integration of SAM, HSM, or similar modules can be realised easily. Using high-end reader technology from Smartware or Micropross, this automatic IC module test handler offers unmatched performance for the complete production test of smart card and RFID modules. Flexible reel to reel system for high-speed test,...

Technical Data Dimensions (L/W/H) 120/65/155 cm Total weight 63 kg Maximum user weight 150 kg Mains-independant operation Performance range graduation in 5 watt steps 15 - 500 Watt pedaling speed independent 15 - 1.000 Watt pedaling speed dependent Speed range 20 - 120 rpm Medical interface RS232 for the connection to the IPN-Test Software (Computer) Equipment Integrated chip card system in series Deep passage for simple training positioning Horizontal and vertical seat adjustment 3 Training programmes (quickstart, watt (timetraining), pulse) Multicoloured background lighting with feedback function for correct training performance Pulse receiver, polar-coded Options 200 kg user weight Additional training and test programmes Length-adjustable pedals Ear pulse system

Technical data Dimensions (L/W/H) 210/82.5/140 cm Total weight approximately 178 kg Rise 0% – 20% Equipment High-definition touchscreen Integrated chip card system in series Emergency stop function button Safety line with magnetic emergency stop Training programmes Quick start, pulse-controlled programmes, performance-controlled programmes, performance-sensitive programmes, various profiles Options Med. RS-232 Isolator including cable Medical LAN isolator Pulse receiver, polar-coded Polar Sender Set T 31, uncoded Polar Sender Set, T 31, coded 3-year warranty extension proxotrain software, IPN-Test Suite

Technical data Dimensions (L/W/H) 118/54/145 cm Total weight approximately 58 kg Equipment High-definition touchscreen Integrated chip card system in series Horizontal and vertical seat adjustment Vertical handlebar adjustment Deep passage for simple training positioning Handle height adjustment Training programmes Quick start, pulse-controlled programmes, performance-controlled programmes, performance-sensitive programmes, isokinetics programme, various profiles, IPN-Test-compatible Options Med. RS-232 Isolator including cable Medical LAN isolator Length-adjustable pedals Pulse receiver, polar-coded Polar Sender Set T 31, uncoded Polar Sender Set, T 31, coded 3-year warranty extension proxotrain software, IPN-Test Suite

Technical data Dimensions (L/W/H) 210/80/136 cm Total weight 200 kg kardiomed Reha Mill S Item no. 10081300 Incline angle 0 to 25% (0 to 14°) , integrated chipcard system kardiomed Reha Mill S Item no. 10036900 Incline angle 0 to 25% (0 to 14°) Equipment Integrated chip card system Safety stop Running surface 150 x 50 cm Step height 16 cm Incline angle 0 to 24% (0 to 13.5°) Transport rollers 3 to 131 sec. (from 0 to max.) Training programmes Quick start, time training, pulse training, calorie training, hill training, random training, interval training, distance training Options Polar Sender Set T 31, uncoded Polar Sender Set, T 31, coded proxotrain software + IPN Test Suite

Easy and self-explanatory For smooth work in physiotherapy facilities: with proxotrain, you can optimise planning, implementation, management, assessment and documentation of training and perform isometric and dynamic tests. The software allows work with the chip card; it is self-explanatory and therefore easy to operate. Accessories In conjunction with the optionally available workoutpoint, free exercises can also be planned, performed, managed and documented and saved on the chip card. Detailed assessment and documentation of the test results Detailed assessment and documentation of the training results Use of training plans and training plan templates Note regarding expiring training plans previous product Technical data Dimensions (L/W/H) 46/52/122 cm Total weight approximately 18 kg (excluding SmartPanel and cockpit) Equipment At the proxomed workoutpoint, a variety of free exercises for invigoration, stretching and coordination can be planned and performed. It is...

Universal Testing Machine for methodical component and materials testing for forces up to 2 kN. Fields of applications are everyday industrial procedures in rough environments as well as in laboratories, in the fields of research and development or teaching. This technically mature product for static tests with modern measurement and control technology, the suitable right accessory and the innovative testing software TesTWinner® meets all requirements of modern material testing. In addition the model is equipped with the TesTController 850. The corresponding software TesTWinner® provides the user - besides to its free programmability - an immense repertoire of possibilities for standard test procedures and routine test execution, evaluation, presentation and further processing of results, automation of processes, and much more. A wide application field is guaranteed by a comprehensive range of accessory.

Universal Testing Machine for methodical component and materials testing for forces up to 1 kN. Fields of applications are everyday industrial procedures in rough environments as well as in laboratories, in the fields of research and development or teaching. This technically mature product for static tests with modern measurement and control technology, the suitable right accessory and the innovative testing software TesTWinner® meets all requirements of modern material testing. In addition the model is equipped with the TesTController 850. The corresponding software TesTWinner® provides the user - besides to its free programmability - an immense repertoire of possibilities for standard test procedures and routine test execution, evaluation, presentation and further processing of results, automation of processes, and much more. A wide application field is guaranteed by a comprehensive range of accessory.

Universal Testing Machine for methodical component and materials testing for forces up to 100 kN. Fields of applications are everyday industrial procedures in rough environments as well as in laboratories, in the fields of research and development or teaching. This technically mature product for static tests with modern measurement and control technology, the suitable right accessory and the innovative testing software TesTWinner® meets all requirements of modern material testing. In addition the model is equipped with the TesTController 850. The corresponding software TesTWinner® provides the user - besides to its free programmability - an immense repertoire of possibilities for standard test procedures and routine test execution, evaluation, presentation and further processing of results, automation of processes, and much more. A wide application field is guaranteed by a comprehensive range of accessory.

Software translation is a multi-stage process which includes: • interface and UI strings localization; • translation of technical and user documentation; • translation of legal documents; • marketing translation. Angira translation company is an experienced professional in localization services. Our goal is to ensure the availability and accessibility of your software to the end-user and expand the customer base for your product. We provide translation services in accordance with ISO 9001:2015 and ISO 17100 international standards. We carry out terminology management, source and translation proof and review within an integrated approach aimed at ensuring high quality of provided services. 24/7 hotline and a personal manager are available to our clients. We perform applications localization of: • user interfaces; • manuals; • mobile apps; • integrate GIT, GITHUB, GITLAB, SUBVERSION; • linguistic testing.

By targeting ProLine specifically at standardized tests on materials and components it has been possible to achieve particularly simple, compact operation for these testing machines. Used in conjunction with our intuitive ZwickRoell testing software, ProLine materials testing machines offer fast, easy operation. All test programs can be used. Development and manufacture of ProLine, including all mechanical, electronic and software components, together with the comprehensive range of accessories, takes place at ZwickRoell's production facility in Germany, enabling optimum matching of all items.

The Kappa creep testing machine is a flexible and highly-precised creep testing machine used for maximum cost-effectiveness. It is fully equipped with a test frame having four steel columns for high lateral and axial stiffness. It is powered by top-quality components that includes testXpert® II testing software and test control measurement and control devices. It has attained success due to its successful installations worldwide. It features an intelligent sensor technology which recognizes and calibrates all the sensors that are connected including their projected force limits and environments. It generally focuses on the most essential requirements of creep testing which include load, temperature, strain and data security.

The ZHU 250 is ideally designed to promote an excellent quality performance and functionality. It is built with an attractive and sophisticated structure used for a very simple and easy operation, direct-viewing and more. It is considered as a versatile tester used for process loading, dwelling and unloading of the test force. It is also constructed with three hardness testing methods specifically the Brinell, Rockwell and Vickers for further variation. It is a fully automated test sequence and a highly accurate closed-loop drive system, together with excellent depth of field. The RS232 connection to testXpert® testing software enables all tests to be evaluated and documented and data transferred to quality assurance systems for further processing. The custom-made accessories tailored to a wide range of applications are also provided.