Threading - Import export

"We can help you with every threading types UN/UNF Thread NPT/NPTF Thread BSPP (BSP, parallel) Thread BSPT (BSP, tapered) Thread Metric parallel Thread Metric tapered Thread"

Coil Wicks : The wick should be plastered with molten paraffin and the wick holder should be attached. In large sized candles, it can also be used as a raw wick without the need for this process. ➢ Roving length; It can be cut 2-3 cm above the candle to be made. You should choose your wick according to the raw material you use and the size of the candle you will make. Roving selection recommendations according to mold diameter: Suitable for molds with a diameter of 9mm – 3.5 cm / suitable for making tealight candles; 10mm – Suitable for molds with a diameter of 5-6 cm; 12mm – Suitable for molds with a diameter of 7 cm; 14mm – Suitable for molds with a diameter of 8 cm

Compared with the machining method, thread forming excels through its higher repeat accuracy and greater strength of the threads. The FormMax solid carbide thread former by LMT Fette is made of a newly developed ultra-fine grain carbide and is tailored precisely to customers’ needs thanks to its optimized geometry. Thread quality and tool life are increased even further, as the coated tool surface is especially smooth. Furthermore, higher circumferential speeds increase the efficiency of thread forming. The tool features integrated coolant channels. The standard program covers the dimensions M4 to M12 and MF8 x 1 to MF14 x 1.5 and is available ex-stock at short notice.

LMT Fette rolling heads generate the thread or required form and then open automatically after rolling. Before the next thread can be rolled the head has to be put back into working position, means the head must be closed. The completely new designed closing clip, delivered as standard, already allows an flexible and user friendly layout of the process for closing the rolling head. Another significant optimization of the closing process can be realized with the new closing device (CCD) for EVOline. Adapted between rolling head and shank and connected with the coolant supply, closing of the rolling head can be transferred from process time to the non-productive time of the machine. Closing by coolant (or even compressed air) can be integrated in the machine program by a simple function.

With XChange from LMT Fette, with its patented interface, for the fi rst time it has been possible to combine the advantages of carbide and steel in a modular tap. Approximately 90 % of the taps used nowadays are still made from high-speed steel. This is because this cutting material is featuring the requested toughness for absorbing the torsional moment as well as the necessary load at the cutting edge when rewinding the tap. HSS, however, is having some disadvantages also, compared to solid-carbide taps: tool life and most importantly the feasible cutting speeds and cycle times are significantly lower. With XChange two physically prohibitive properties has been combined: The solid-carbide threaded head, a combination of ultra-fine grain carbide and high performance coating, is providing: - maximum tool life - and high cutting speeds The flexible steel shank guarantees - the stability of the tool - and offers extra efficiency

Kaleliler is manufacturing threaded rods, studs, anchor bolts within a range of M 12 - M 220. Vaious types of surface treatments including hot dip galvanize are applicable.

drylin® SHT-12 linear module, drylin® R hard-anodised aluminium shafts, Trapezoidal lead screw TR10x2 made of stainless steel with ball bearings, machined lead screw ends 6h9x17mm, quad blocks, aluminium shaft end support, stroke lengths in 250mm or 500mm. Configure drylin SHT linear modules individually here: https://igus.eu/ddx

Introducing our Wooden Cap with PP DIN18 Thread, a premium sealing solution that marries natural aesthetics with functional reliability. Crafted from high-quality wood, this cap exudes an organic charm while ensuring the integrity of your packaged contents. Designed with a precision-engineered PP DIN18 thread, our wooden cap offers a secure and tight seal, providing peace of mind during storage and transportation. The inclusion of the PP material enhances durability and ensures longevity, making it ideal for repeated use. The wooden construction of the cap not only adds a rustic and artisanal touch to your packaging but also aligns with sustainability principles. By opting for wood sourced from responsibly managed forests, we contribute to environmental conservation efforts, making our wooden caps an eco-conscious choice for conscientious consumers.

Soft Cake Yarn, which is made from 50% cotton and 50% acrylic is ideal for crocheting and knitting fashion accessories. With this soft color graident yarn it is very easy to create projects like shawls, beanies, cardigans and much more. We offer you 16 different color gradients for this yarn. Out of one ball you will get easily a shawl. Now choose your favorite combination and start to create wonders. We do our best to display our colors as accurately as possible, but keep in mind that the color you see on the screen may differ slightly from the color you get.

Steel C35Pb. Gunmetal Rg7. Plastic PA6.6 with MoS2). ISO trapezoidal thread based on DIN 103. Steel nuts for adjustments during manual operation and as fastening nuts. Not advised for use with motorised drives due to the steelsteel material combination. Gunmetal nuts for motion drives with low and medium speed. By insufficient lubrication, gunmetal trapezoidal thread nuts on steel spindles have good dryrunning properties. Plastic nuts for lownoise motion drives. Good dryrunning properties. Tolerance class 7H.

Steel 1.0401 (C15) or stainless steel 1.4301 (whirled spindles stainless steel 1.4305). Version Steel rolled, bright. Stainless steel up to Tr 40x7 rolled, above this whirled, bright. Note Rolled, high precision trapezoidal thread spindles. ISO trapezoidal thread based on DIN 103. The trapezoidal thread spindle is a transmission thread with relatively high friction. Standard thread forms are selflocking. This has the advantage that they generally do not need to be secured in the rest position. Tolerance class 7e Pitch precision 0.3/300 mm Length sawed with excess, ends not deburred.

Straight from our warehouse Approx. We always have 150 different versions of threaded outlets (ANSI B 16.11 / MSS SP 97) available in our extensive warehouse in Kamen. In our warehouse we have threaded outlets with NPT threads according to ASME B1.20.1 in stock. Threaded outlets with BSP / T threads according to ISO 7-1 and with BSP / P according to DIN ISO 228 are available with short delivery times. We only deliver goods of European origin. Standards and special requests Threaded outlets are available in two pressure levels (3,000 lbs and 6,000 lbs) and in all common materials. If required, we can also supply special materials. In the case of threaded outlets, a distinction is also made between reduced and full branches. Express service We can deliver threaded outlets in stock within Germany the next day to the customer if the order is received by 11.00 a.m. Simply specify when ordering if you would like to use this express service.

Universal thread adapter for nearly all drums and other containers with opening of 48–75 mm in diameter, regardless of the respective thread. The thread adapter can be mounted quickly and easily with clamping screws and can be used for different container openings. With G2" connector thread for Bürkle drum screw connections and pumps with immersion tube diameter up to 32 mm. The container connectors make decanting even easier and safer with their more secure connection to barrels. The connectors secure the pump in the barrel, enable a vertical position change and allow the required air exchange.

Reinforced threaded inserts allow threaded holes which have been damaged, torn out or jammed to be used again or to be repaired. This makes it possible to recover scrap and rejects of expensive products. Reinforced threaded inserts are suitable for use in various materials, including light metals and casting. Inserts with internal threads larger than M6 are supplied with four locking pins instead of two. Permissible deviations: The medium tolerance class applies to the threads listed, i.e. 6H for nut threads and 6g for bolt threads. Other dimensions ±0.25 mm. With reinforced threaded inserts we also offer a version with a stronger cross-section for use in applications with greater stress. Technical information see operating instructions for threaded inserts.

Self-tapping threaded inserts for making high-strength, wear-free, vibration resistant screw connections in materials with low shear strength such as aluminium and aluminium alloys, brass, bronze, cast iron, duro and thermoplastics. The threaded inserts are tapered at the bottom and have a cutting slot. By screwing in they cut their own threads inside a receiver hole. This guarantees a completely secure and firm anchoring in the host material. Internal thread D1 acc. to ISO 6H. The threaded inserts with cutting slot spring slightly inwards in the slot region in some materials. This results in a screw locking effect. If this is not desired, we recommend the threaded inserts with a cutting bore.

The economic adjustment to small batch sizes, we meet with our turned parts for the direct assembly in plastics and die-cast products. Any thread forms such as, thread-tapping (DIN7500), thread cutting (DIN 7513-7516) or KTG for direct screw in plastics are realized cost-effectively. Advantage is the elimination of high tooling costs, since no counter-thread in the workpiece (eg threaded inserts, nuts, etc.) is required because the direct assembly takes place directly into the workpiece. Only a given tube is required in order to screw it directly. Our turned parts replace previously cold formed parts used (so-called multi-station presses) which require high output volumes in order to achieve a reasonable price parts.

Since we started to transform recycled cotton fiber into environmentally friendly yarn with a sustainable production approach, we combine the experience we have gained in the sector with the hard work and energy of our expert, young and dynamic team, and offer the most appropriate solutions to our business partners in line with their demands. Producing neither 6 - nor 30 yarns for recycling, Pak Pamuk can meet special requirements separately from the types in the color catalog. Please contact us for detailed information and color catalogue.

Since we started to transform recycled cotton fiber into environmentally friendly yarn with a sustainable production approach, we combine the experience we have gained in the sector with the hard work and energy of our expert, young and dynamic team, and offer the most appropriate solutions to our business partners in line with their demands. Producing neither 6 - nor 30 yarns for recycling, Pak Pamuk can meet special requirements separately from the types in the color catalog. Please contact us for detailed information and color catalogue.

High-strength for design and repair Coil threaded inserts or “coils” are an outstanding solution for achieving highstrength joints in parts made from low-strength materials (e.g. aluminium lightweight constructions). At the same time, high wear resistance is guaranteed. Furthermore, the inserts are ideally suited for the repair of damaged threads. Very simple handling Coils consist of a specially formed and coiled wire with a driver pin that can be removed after installation and can be fitted quickly and easily in just a few steps. Choose the right threaded insert for your application from over 500 sizes. Do you need a special form? No problem! Together with you, we can develop the required coil threaded insert and produce it in the highest quality.

Ceramic-to-Metal Seal The Ceramic Surfaces for Brazing, the surface must be metallized. Compare to Glass seal, Ceramic seal has exceptional resistance to thermal and mechanical shock as well as corrosion. While it requires more complex manufacturing processes and sophisticated engineering, the price is obviously higher.

threaded sleeve external threaded M10x1 size diameter: 14 mm height: 12 mm through hole diameter 6.3 mm material: corrosion-resisting stainless steel AISI 304 Soochow Advance Industries Co., Ltd., (website: www.sai-parts.com) supplies custom OEM mechanical parts, industrial fasteners, screws, bolts, nuts, industrial fittings, electronic hardware by precision CNC machining, CNC turning, CNC milling, CNC engineering.

Steel Pin, Threaded Stud, for door use 2 holes drilled and threaded, thread grade: 5/16-18 UNC size: hex incircle diameter 0.750 +/-0.010 inch length 4.438 +/-0.010 inch, across flats distance of hex end 0.75 inch, round end diameter 0.625 +0.000/-0.005 inch unit weight: 223 g material: cold rolled steel surface finish: rust preventive oil Soochow Advance Industries Co., Ltd., (website: www.sai-parts.com) supplies custom OEM mechanical parts, industrial fasteners, screws, bolts, nuts, industrial fittings, electronic hardware by precision CNC machining, CNC turning, CNC milling, CNC engineering.

ladder-shaped threaded rod size helical pitch: 10 mm diameter: 14 mm length: 300 mm 2 holes milled and threaded in one end, thread specification: M3 material: stainless steel 303 Soochow Advance Industries Co., Ltd., (website: www.sai-parts.com) supplies custom OEM mechanical parts, industrial fasteners, screws, bolts, nuts, industrial fittings, electronic hardware by precision CNC machining, CNC turning, CNC milling, CNC engineering.

Ming Xiao Manufacturing Co., Ltd engaged in Turned Parts manufacturing more than 20 years, We have introduced various types of precision CNC lathes to process high precision and high finish turning parts. Name: CNC Turned Parts,Hose Coupling Material: Stainless Steel,Carbon Steel, Aluminum Alloy,Brass Finish: Natural, passivation for stainless steel,anodizing & anodine for aluminum,zinc plating,chrome plating,nickel plating,hot galvanizing heat treating,oiled for carbon steels, etc. Machined type: CNC Turning, CNC Milling, CNC Boring, CNC Threading,Tool Milling,etc. China CNC Turned Parts Manufacturer custom produce all kinds of turned parts according to customer’s drawing or samples, we can produces stainless steel Turned parts,carbon steel Turned parts, aluminum turned parts,brass & copper turned parts. If you are interest in our CNC turning services, welcome send us a inquiry, then we can discuss about your turning parts project !

Aluminum Thread Adapters are precision-crafted components made from high-quality aluminum alloys. The adapters are processed using CNC Lathe Machining, ensuring accurate and reliable performance. Common aluminum alloys used for this product include 6061-T6 and 7075-T6, which offer excellent strength and corrosion resistance. The Aluminum Thread Adapters are finished with a tough, matte-textured anodized layer, providing a durable and aesthetically pleasing appearance. The anodized finish also enhances the overall durability of the adapters, protecting them from wear and tear while in use. These adapters are designed for a wide range of applications, including but not limited to piping systems, fluid handling equipment, and machinery components. Their threaded connections allow for secure and reliable fastening between various components, ensuring smooth operation and efficient performance. Ming Xiao Mfg., based in China, is a trusted supplier of customized aluminum components.

China Metal Parts Factory Custom Threaded Rod, Threaded Jointed Parts, Threaded Connecting Parts according to customers’ design or sample. Name: Threaded Rods, Threaded Connecting Parts Material: Carbon Steel, Stainless Steel Finished: Zinc Plated, Chrome plated, Chemical Cleaning Machined type: Lathe Turning, Chipping, Drilling Hole,Thread Rolling / Cutting Our customized threaded rods are mainly used for connection and fastening, not for transmission purposes.The thread rods mainly produced by Rolling or Lathe cutting. We can produce threads base on ISO Metric Screw Threads & UN Threads. Ming Xiao Mfg provide Quality OEM custom services for metal machine parts, has various machining processes, can meet the processing requirements of different types of metal parts, welcome send inquiry to us.

Threaded rods and pins made of molybdenum and the molybdenum alloy TZM are available in the Plansee Online Shop. Order fast and easily from the producer's online shop: www.plansee.com/shop.