Tubing for hot air - Import export

Air flow routing tubes are designed to channel different kinds of air to appropriate destinations. If you have a specialized vehicle and need superior flexibility in your air duct tubing, these products lead the industry. CARADUCT® flexible tubes are multi-layer, grooved tubes that are wound from a combination of aluminum and paper layers. They possess a particularly high crushing strength and have very good insulation properties. Through high flexibility and small bending radii, they offer good space usage, particularly when laying out in corners. Dükerrohr is a twin flexible tube distinguished by a particularly high insulation effectiveness to reduce temperature drops in the warm air ducting. Since it is installed outside of the vehicle, it carries additional protection against water and oil splashes.

This shrink tubing is specially designed for anchorage points (Ø 16 mm) and supports that have been reinforced using a supporting tube (Ø 42 mm). It is available in 3 different lengths (300, 600 and 1200 mm) and can be individually shortened. When you heat the tubing up using a hot air gun it shrinks to fit snugly around your sealant collar and anchor. Extension for ABS LockSeal sealant collars Designed for Ø 16 mm posts Available in 3 different lengths: 300, 600 and 1200 mm Simply shorten the tubing to the required length

The TOP TROCK dry panel with hot-air blower GF 900, consisting of 10, 20, 30, or 40 hangers is the ideal module in order to provide fast and careful drying of shoes, boots and gloves to large groups. The gentle and reliable drying of items is regulated by tubes filled with hot air. This gentle drying process increases lifetime of materials up to twice – three times. Technical details 230 Volt ~ 1300 Watt 10 years guarantee for panel 2 years or 5000 operating hours guarantee for hot-air blower GF 900 TOP TROCK hot-air blower complies with Machine Safety Code CE approved Plug-in timer (optional) Equipped with nozzles at parallel shaped tubes Made of Nirosta steel 304 Stainless, robust and almost indestructible 1 – 3 hours drying time for shoes, boots and gloves (depending on degree of humidity and inner material) Dryer panels can be either wall-mounted or mounted onto mobile rack Unlimited expandable Space-saving Dimension of paneel with 10 hangers: W 67 x H 59 x D 38 cm 20...

Heating of greenhouses and large areas with diesel or gas hot air generators The hot air generators for greenhouses of the AM series are equipment that works completely autonomously, that is, they do not need heat dissipating elements, which reduces acquisition and installation costs. Its operation can be diesel, methane gas or propane gas and its operation is based on heating the air drawn in by the fans and driving the hot air inside the room to be heated. The main advantages over other heating systems are: - Reduction of acquisition and installation costs. - Very fast heating system. - Air diffusion can be direct or a network of ducts can be applied to channel the air into adjacent areas where the equipment has been installed. - 90% combustion efficiency.

Domestic heating with hot air boiler with diesel operation Hot air boilers with diesel operation are a fast and efficient system for heating domestic and commercial premises. The equipment has a soundproofed interior of the diesel burner so that its operation is as quiet as possible. It also incorporates a 3-speed fan to adjust the air flow according to the heating needs of the room to be heated. For its operation, a fuel tank, a smoke outlet and a single-phase connection socket are required. The diffusion of the hot air can be direct or with a network of ducts to direct the hot air to the different rooms to be heated.

Outdoor hot air generator for the heating of tents, covered swimming pools, etc. POOL MANN hot air generators are a perfect solution for the heating of closed premises where a heating system is required where the heat generating equipment must be located outside the room to be heated. Its operation can be diesel, methane gas or propane gas and its operation is based on heating the air drawn in by the fans and driving the hot air inside the room to be heated. The main advantages over other heating systems are: - Reduction of acquisition and installation costs. - Very fast heating system. - Air diffusion can be direct or a network of ducts can be applied to channel the air into adjacent areas where the equipment has been installed. - 90% combustion efficiency.

Portable diesel heaters for heating closed spaces The portable diesel hot air heaters with smoke outlet, are ideal for heating indoor spaces. The equipment is totally portable and incorporates a fuel tank to obtain a correct autonomy of operation. The equipment incorporates a burner that provides a flame inside the combustion chamber that travels inside to obtain the greatest heat exchange. A fan providing air inside the equipment and when passing through the hot zones increases its temperature and is driven inside the room to be heated. These equipments have flue gas outlet and are suitable for any type of premises. The equipment can be controlled with an ambient thermostat that is responsible for starting or stopping the equipment depending on the desired temperature.

Industrial wall mount heater with diesel operation The GS wall-mounted industrial heaters are units that operate completely autonomously, that is, they do not need heat dissipating elements, which reduces acquisition and installation costs. Its diesel operation is based on heating the air drawn in by the fans and driving the hot air inside the room to be heated. The main advantages over other heating systems are: - They do not take up space on the floor. - Reduction of acquisition and installation costs. - Very fast heating system. - Air diffusion can be direct or a network of ducts can be applied to channel the air in adjoining areas where the equipment has been installed. - Efficiency of combustion of 92%.

Drying processes with hot air generators fully configurable in flow and air pressure AGM hot air generators are units that work completely autonomously, they do not need heat dissipative elements, which reduces acquisition and installation costs. They can run on diesel, natural gas or propane gas and their function is based on heating the air drawn in by the fans and driving the hot air inside the room to be heated or dried. Its design allows the application of all types of low, medium or high pressure fans according to the needs of each installation. The main advantages over other heating systems are: - Reduction of acquisition and installation costs. - Very fast heating or drying system. - Air diffusion can be direct or a network of ducts can be applied. - 90% combustion efficiency. - Possibility of supply with low, medium or high pressure fans.

Industrial warm air heater with diesel or gas operation from 26 to 500 kW The MM hot air generators are indirect heating type equipment (the hot air does not mix with the combustion gases) and they work completely autonomously. They do not need additional elements for heat dissipation, a fact that reduces acquisition, installation and maintenance costs. Its operation is based on the heating of a certain air flow, through the combustion of diesel, natural gas or propane gas. Said flow is aspirated and driven by the fans that the equipment incorporates and that comply with the ERP 2020 regulations. The main advantages over other heating systems are: - Reduction of acquisition and installation costs - Very fast heating system - Air diffusion can be direct or a duct network can be applied - 90% combustion efficiency

- Made of polyester-polyurethane (PU) - Color black (red, blue, green, yellow, natural, brown, orange and grey: specify when placing order; subject to extra charge) - External calibration; for use with Eisele plug connectors - Temperature range -31 to 158 °F (-35 to +70 °C) - Free of plasticizers, PWIS, copper and PTFE - Impervious to buckling and drag chain compliant - Suitable for vacuum

- Made of polyether-polyurethane (PU-H) - Color transparent: natural, red, blue - External calibration; for use with Eisele plug connectors - Temperature range -31 to 140 °F (-35 to +60 °C) - Free of halogen, plasticizers, PWIS, copper and PTFE - Impervious to buckling and drag chain compliant - Resistant to hydrolysis and microbes - Suitable for vacuum - FDA compliant according to 21 CFR 177.2600