Stainless steel sheets - Import export

- AUSTENITIC ALLOY SHEETS GRADE: AISI 201 / 301 / 304 / 304L / 310 / 310S / 316 / 316L / 316TI / 321 MEASUREMENT: THICKNESS: 0.4 mm - 6 mm WIDTH: 350 mm - 1600 mm LENGHT: 300mm - 6000 mm FINISH: 2B, BA, 3N, 4N, 5N, SCOTCH BRITE, HAIRLINE, DUPLO - FERRITIC ALLOY SHEETS GRADE: AISI 409 / 430 / 434 MASUREMENT: THICKNESS: 0.40 mm - 6 mm WIDTH: 350 mm - 1600 mm LENGHT 300mm - 6000 mm FINISH: 2B, BA, 3N, 4N, 5N, SCOTCH BRITE, HAIRLINE, DUPLO -DUPLEX GRADE: AISI 2205 / 2001 MEASUREMENT: THICKNESS: 0.40 mm – 3mm WIDTH: 350 mm - 1600 mm LENGHT: 300mm - 6000 mm FINISH: 2B, BA, 3N, 4N, 5N, SCOTCH BRITE, HAIRLINE, DUPLO

quality 300 series 400 series surface : BA - 2B - SB + NO:4 thickness : 0,30 - 6,00 mm width : 1000 / 1250 / 1500 mm lenght : 2000/ 2500 / 3000 mm

Our Infrared ovens can be produced as conveyor belt tunnel or internal return (U) type. Our ovens have andirect heating system with radiation heat transfer. They are used due to the cure flat shaped parts after wet or powder coating paint applications. They are preferred because they can cure the paint three times faster than the convectional type ovens. They can be produced with natural gas or lamp type infrareds. The inner surfaces of our ovens’ panels are produced with a galvanizedor stainless steel sheets and the outer surfaces are produced with galvanized sheet steel coated with electrostatic powder paint. Considering the application temperature, the required thicknesses determined and rock wool or glass wool is used for insulation.

In the spraying pre-treatment method, applying chemicals with a certain pressure on the parts creates big positive differences on paint quality and life span. By cleaning and coating the surface of the part before painting, the paint will retain its first-day quality with out any degradation for long years by strong adhesive forces. Our spray tunnels, with the help of automation systems, allow you to be able to produce automatically and continuously with out any touch. Tunnel type spray surface cleaning lines consist of parts like spray nozzles, heat exchangers, dosing pumps and ventilating systems. In our spray lines, the AISI 304 – AISI 316 stainless sheets of steel and polypropylene are used. According to needs of our esteemed customers, horizontal belt type conveyor, compact type, and rotary table type automatic plc controlled washing machines can be produced by us. Some chemicals which are used for surface cleaning must be applied hot. Due to this situation

Our wet painting booths are manufactured as standard or custom design according to the customer’s needs. For the cabin selection, the dimensions of the parts and the targeted capacity are the determining elements. Our booths are made of stainless steel or galvanized sheet and fully assembled with bolts. In our wet painting booth with solid filter, the air is sucked through the filters by exhaust fans while the unused wet paint is held by paper or fiber filters. And the clean and healthy environment is created by supplying the fresh air to the environment. Teflon (non-stick), solvent based and water based paint applications can be applied in our wet painting booths. We also design Flash off and Positive Pressure rooms for our wet paint plants. In flash off rooms, solvent separation process of painted parts is done. The solvent that released in these rooms is removed by exhaust fans and a healthy working environment is obtained.

The dipping system which is one of the other methods is produced with a robot or crane controlled. The systems are equipped with the most efficient heating, ventilating and PLC control equipment. In our dipping lines manufacturing, AISI 304- AISI 316 stainless sheets of steel and polypropylene are used. The system should be selected according to the shape of the part, the area to be used and the corrosion resistance. Some chemicals which are used for surface cleaning must be applied hot. Due to this situation, our company produces cold dipping lines as well as natural gas heated, electric heated, liquid fuel heated and water heated dipping pre-treatment lines according to the energy source that is planning to be used.

Our wet painting booths are manufactured as standard or custom design according to the customer’s needs. For the cabin selection, the dimensions of the parts and the targeted capacity are the determining elements. Our booths are made of stainless steel or galvanized sheet and fully assembled with bolts. In our wet painting booth with water curtain, the air is sucked through the water curtain by exhaust fans while the unused wet paint is held by water. And the clean and healthy environment is created by supplying the fresh air to the environment. Teflon (non-stick), solvent based and water based paint applications can be applied in our wet painting booths. We also design Flash off and Positive Pressure rooms for our wet paint plants. In flash off rooms, solvent separation process of painted parts is done. The solvent that released in these rooms is removed by exhaust fans and a healthy working environment is obtained.

Our powder paint booths are manufactured as standard or custom design according to the customer’s needs. For the cabin selection, the dimensions of the parts and the targeted capacity are the determining elements. Our booths are made of stainless steel or galvanized sheet and fully assembled with bolts to easy disassembling. Recycling is done with the cyclones in our powder coating booths with cyclone. It is preferred because it allows easy and fast color change. The powder particles which are not used passes through the cyclone unit before the filter unit. While the particles go down through cyclones with centrifugal effect, the particle that cannot be reused is sent to the filter unit and filtered there. The parts which are suitable for recycling are recycled to the system for reuse. Multi and mono type cyclone units are used in our booths. Both types offer efficiency with recycling systems, practicality with easy color changing. In filter cabins, it is necessary to change

Our powder paint booths are manufactured as standard or custom design according to the customer’s needs. For the cabin selection, the dimensions of the parts and the targeted capacity are the determining elements. Our booths are made of stainless steel or galvanized sheet and fully assembled with bolts to easy disassembling. In our powder paint booths with filter, the air is sucked through the filters while the unused powder particles are held by filters. The filters are automatically and periodically pumped air in reverse direction to direct the powder paint that held by filters to the sieve tanks which is under the cabinet for reusing. As a result of this process, the unused powder paint is recycled. Polyester-Teflon and Sinter-Lamellar type filters are used in our booths. Polyester-Teflon filters are preferred due to their low cost and Sinter-Lamellar filters are preferred due to their long filter life. Both types offer efficiency with recycling systems, economical solution

With our Latest Technology 3100 mm long HNC Guillotine Cutting Machine, DKP, HRP, mild steel, stainless and aluminum sheet metal is cut from 0.50 mm to 10 mm thickness with ±0.1 mm precision.

We can shape metal materials with our press brake machine with a capacity of 380 tons. We can shape your aluminum, stainless steel and ST series metal sheets in the desired form.

The upper surface of the floor panel is made of 10 mm thick plywood lower surface 0.5 mm thick galvanized sheet. The plywood surface prevents slipping thanks to its honeycomb structure. If desired, the tread can be produced from aluminum or stainless steel sheet as non-slip.

Elastomeric bearings we have defined so far are the basic types, which constant feature is the fact that they allow all-ways movements and rotation. However, movements can be limited in one or all ways, thus obtaining guided or fixed bearings, respectively. In the first case -guided bearings- the restriction is obtained by means of guides parallel to the supporting axe that allows movement. To make friction as low as possible, PTFE and stainless steel sheets are welded to the guides.

The bearings we have defined so far are the basic types, which constant feature is the fact that they allow all-ways movements and rotation. However, movements can be limited in one or all ways, thus obtaining guided or fixed bearings, respectively. In the first case -guided bearings- the restriction is obtained by means of guides parallel to the supporting axe that allows movement. To make friction as low as possible, PTFE and stainless steel sheets are welded to the guides.

Abkant bench is a kind of press machine used in bending or folding metals. Today many computerized Abkant machines are available. It has improved production by making it faster, saving time, and with respect to shapes. Cylindrical, conical, elliptic and oval materials may be produced by Abkant bending process. In selecting Abkant press, length, thickness and type of the material to be folded (stainless steel, aluminum, conventional sheet, ST, etc.) are important. The machines have separate molds and radii specific to them for various folding processes. A calculating metal sheet angle in Abkant folding is a job requiring expertness. Otherwise, folding lengths may not be produced at the required size. We, as Ramazan Aycan Sheet and Steel Processing Center, we provide you with guaranteed services with our expert staff

Abkant (Press Brake or Bending Press) machines are a type of bending press. They are used in operations such as metal bending and metal curling. Nowadays, many computer-controlled Abkant machines are available. These machines have accelerated the production in terms of both form utility and time saving. With Abkant curling cylindrical, conical, elliptical and oval shapes can be provided. The length, thickness and type of the material (stainless, aluminum, steel sheet, etc.) to be curled are important in the choice of Akbant machine. Akbant machines have individual molds and specific radiuses for various bending operations. The angle calculation of the sheet while performing bending operation using Abkant machine is a skill that requires expertise. Otherwise, bended lengths may not be at the desired sizes. As Ramazan Aycan Inc., we provide you with bending services with our hydraulic and electro servo Abkant machines.

Cold-Rolled Sheet With thickness range of 0,30 – 2,00 mm rolled and packaged Hot-Rolled Sheet With thickness range of 1,50 – 20,00 mm rolled and packaged Plate S235JR/J2+N - S355JR/J2+N grade steel plate with thickness range of 20,00 - 150,00 mm Galvanized Sheet Different grades with the range of 0.30 - 3.00 mm Diamond Patterned Sheet S235JR grade with the range of 1,00/1,25/1,50 - 2/3,3/4,4/5,5/6 mm In addition to this, we sell box profile, angle iron, sheet iron, NPU, NPI, HEB, HEA, industrial and water pipe, galvanized pipe, square and round iron, expanded sheet metal, stainless steel, aluminum and teardrop patterned sheet metal. +

CERM-EX offers Sheet Metal Design, Fabrication, Manufacturing, Construction, Assembly and Field Installation. We provide comprehensive Metal Working Solutions for all your custom sheet metal fabrication needs. If it can be designed and drawn, if it can be made of metal or metal plate, then CERM-EX can make your drawings a reality. We work with carbon steel, alloy steel, stainless steel, and aluminum sheet metal. Typical products we fabricate from these materials are metal cones, fabricated metal elbows, transitions, cyclones, tanks, compressor skids, industrial belt guards, metal cylinders, coupling guards, troughs, motor base, blower housings, strainer baskets among many other products.

Stainless steel is a very common material to use in fabrication projects, thanks to its versatility and durability, among others. Stainless steel possesses high good corrosion resistance which makes it the primary option for industries such as pharmaceuticals, food, petrochemicals and machinery.The versatility of stainless steel requires different fabricating techniques. Stainless steel is a sensitive material which requires delicate weld preparation practices such as thorough surface preparation prior to commencement of welding. Shoddy surface cleaning may compromise the material features such as corrosion resistance. Stainless steel has definite advantages over other metals and, it’s one of the most expensive metal. This high cost puts additional pressure on fabricators to be more careful in fabrication processes. Stainless steel should be fabricated in a specialized clean workshop to prevent contamination. Also it required specialist steel contractors

We can completely flatten the skewed steel sheets with our machine. From 0.50 mm to 4.00 mm thick, various metals (Aluminium, CR, Galvanised steel, Stainless Steel) can be flattened. Material widths vary according to metal thickness and type. Contact us for detailed information

Coil steel sheet is a building product obtained by cold rolling of liquid steel, which is frozen by continuous pouring, and then zinc coated by hot dipping method. The flat steel type produced in desired dimensions is highly preferred thanks to its easy processing, shaping and durability.

-COILS GRADE: AISI 303 / 304 / 304L / 316 / 316L / 316TI / 310 / 310S / 321 /430 MEASUREMENT: THICKNESS : 0.40 mm - 6 mm WIDTH: 350 mm - 1600 mm FINISH: 2B, BA, 3N, 4N, 5N, SCOTCH BRITE, HAIRLINE, DUPLO - NARROW COILS GRADE: AISI 303 / 304 / 304L / 316 / 316L / 316TI / 310 / 310S / 321 /430 MEASUREMENT: THICKNESS : 0.30 mm - 3 mm WIDTH: 210 mm - 900 mm FINISH: 2B, BA, 3N, 4N, 5N, SCOTCH BRITE, HAIRLINE, DUPLO - STRIP COILS GRADE: AISI 303 / 304 / 304L / 316 / 316L / 316TI / 310 / 310S / 321 / 430 MEASUREMENT: THICKNESS: 0.30 mm – 3 mm WIDTH: 10 mm - 210 mm FINISH: 2B, BA, 3N, 4N, 5N, SCOTCH BRITE, HAIRLINE, DUPLO

Chef Knife