Utilising the ultra high capacitance SHAW moisture sensing technology. The AcuDew is suitable for continuous measurement of trace moisture in process gases and dry compressed air, offering superior sensitivity, repeatability and speed of response. Various dewpoint ranges are available covering an overall range of -120 °C to +20 °C (-184 °F to +68 °F) dewpoint with an overall system accuracy of ± 2 °C (± 3.4 °F). The output is configurable to display in °C dewpoint, °F dewpoint, ppm(v), ppb(v), g/m3 and lb/MMSCF. Incorporating the unique AutoCal function designed by Shaw Moisture Meters, allowing the user to ensure accuracy between laboratory calibrations by checking the span of the hygrometer and correcting for any deviation. This high performance dewpoint transmitter can cope with extreme environmental conditions, offering protection to IP66 NEMA 4X. Its rugged construction has been tested to withstand 35,000 kilopascal (350 bar) maximum pressure.
Germany
The QuellTech laser sensor family Q4 or Q5 used for these tasks is generally mounted on an arm of a rotational axis, to scan along the complete 360° angle of the internal surface in a sequence of strips. The Q4 sensors can also be used to control the weld seam tracking itself for rapid setup and ease of use. Even during a project, the range and scope of the Q Series sensor demonstrates the advantages of a modular system to quickly adapt to project needs, where the smallest system has provided fast analysis of pipes as small as 105mm. The low power, with standard communication protocols, enable battery powered systems to transmit wireless data to other systems for review and cloud back up.
Request for a quoteUnited Kingdom
Knight Optical can offer you Plane Mirrors (general, λ/1 and λ/4), for use within 3D Mapping Applications in a range of materials such as Soda-lime float glass, white float glass, and BK7 glass. Plane mirrors also known as front surface mirrors or first surface mirrors are used within 3D Mapping Applications. As stock we hold a number of general purpose, λ/1 and λ/4 with a range of up to 6 types of coatings such as Enhanced Aluminium, Ali/SiO2 and Ali/Mgf2. Our general purpose grade mirrors are made from good quality float glass and generally available in thicknesses of 1mm, 3mm and 6mm as standard. How our mirrors are used within 3D Mapping, is they are used as a sender and receiver of a laser beam that will take a reading of a specific surface, and from that reading it can create a 3D map of the surface that is has read. FOR MORE INFORMATION READ THE PDF..
Request for a quoteTurkey
In line with the pattern demand, the technical drawings are given to the pattern shop in our structure or to the pattern manufacturers we have been working for years. Pattern measurements are reported to our customers and after approval, to be taken to the following mold.
Request for a quoteCreate one request and get multiple quotes form verified suppliers.