BBE BAMBERG + BORMANN-ELECTRONIC GMBH

The Trotec PC200 Particle Counter features 6 measuring channels (0.3, 0.5, 1.0, 2.5, 5.0 and 10.0 μm) with three counting modes (concentration, cumulative and differential) and counting efficiency of 50% at 0.3 μm and 100% for particles beyond 0.45 μm. The internal pump allows flow rate of 2.83 l/min (0.1 ft³/min) and the zero count is < 1 particles / 5 min with a coincidence loss of 5%, 2 million particles per ft³ (28.3 liters). The Laser class 3B with wave length of 780 nm and 90 mW is used as a light source while isokinetic probes serve as sample inlet. The device can be used to easily acquire readings on air temperature, humidity, dew point temperature and wet-bulb temperature.

QAL 1 certified for continuous, accurate and reliable measurement of total mercury emissions, even in very low concentrations and within complex matrices (SO2, NOx, HCl, etc.).

The T610 is a handheld measuring instrument from the Trotec MultiMeasure family, used for quick non-destructive moisture measurement up to 300 mm. Another advantage of the process, aside from the measuring depth, is its independence from the level of salt content in the material. This creates no dissimilarity to the microwave technique, whether it is an older or a new building being gauged. Since the unit’s screen can show two values, for purposes of results evaluation, a function value can be indicated at the same time as the present measured value, if needed. The T610 moisture meter can be linked to a PC through a USB cable. Due to the MultiMeasure Studio Software, the gauged values of the device can be transported online and in real time to the PC. A few practical benefits: German industrial design in robust, premium two-component construction with IP54 type of protection

Non Dispersive Infra Red Carbon Monoxide Analyzer for CO measurements in the range 0-50ppm. CO2 monitoring as option.