Cone Flowmeter
Description
Suitable for short straight lengths and low flow ratesSolder (BW) or flanged connection Material: Standard: carbon steel, stainless, others according to your application
- Yardsticks, metersticks, tape measures and rulers
- Flowmeter Cone
- Flanged Flowmeter
Product characteristics
- Standards
- ISO 5167-1 & 5
- Fluid
- liquid, gas, steam
- Diameter of pipes
- from 50 to 500 mm
- Accuracy
- 5% of max flow
- Repeatability of the measure
- 0.1%
- Reynolds number in pipework
- 8.104 ≤ ReD ≤ 1,2.107
- Pipe interior diameter
- 50 mm ≤ D ≤ 500 mm
- dc,cone diameter where its circumference is greatest
- 0.45 ≤ β ≤ 0.75 (1)
- Cone surface roughness
- Out 5.10⁴.d c
- Radius at the max circumference of the cone
- R1 < 0,000 5.dc ou < 0,2 mm
- Distance between upstream and downstream pressure
- 50 mm ≤ L ≤ 2.D
Documents
Similar products from DELTAFLUID
DELTAFLUID
France
Actor in the field of instrumentation, Deltafluid offers measurement products in pyrometry. Our range includes thermometers to obtain direct indications of temperature but also temperature sensors (resistance probe, thermocouple, multi-point probe, pyrometer assembly ...) which can be coupled with transmitters.
DELTAFLUID
France
Instrumentation accessory for setting and commissioning the measuring instrument A manifold is mounted to the interface between the pressure taps and the transmitter. It is used to isolate the transmitter in case of intervention on the pipe. It also allows you to reset the zero of the transmitter or purge the impulse taps.
DELTAFLUID
France
Suitable for low flow rates and fluids with impuritiesSolder (BW) or flanged connection Material: Standard: 304L / 316L stainless steel, others according to your application.
DELTAFLUID
France
Suitable for flow measurement in large pipes, for installations with low pressure dropAverage measurement over the entire length of the tube. Installation on the pipe: compression fitting, flange ISO PN 2.5 to 420 or ASME 150 # to 2500 #, retractable. Material: Standard: 304L / 316L stainless steel, others according to your application.