Pitot Tube
Description
Suitable for flow measurement in large pipes, for installations with low pressure dropAverage measurement over the entire length of the tube. Installation on the pipe: compression fitting, flange ISO PN 2.5 to 420 or ASME 150 # to 2500 #, retractable. Material: Standard: 304L / 316L stainless steel, others according to your application.
- Yardsticks, metersticks, tape measures and rulers
- Tube Pitot
- Pitot Measurement
Product characteristics
- Standards
- ASME MFC-12M
- Fluid
- liquid, gas, steam
- Diameter of pipes
- from 100 to 5000 mm
- Precision
- contact us
- Repeatability of the measure
- 0.1%
- Reynolds Number in pipework
- ReD > 1,2.104
- Pipe interior diameter
- 100 mm ≤ D ≤ 5 000 mm
- Upstream straight length
- L1 ≥ 7.D
- Downstream straight length
- L2 ≥ 3.D
- Maximum permissible pressure
- P ≤ 600 bar
- Maximum permissible temperature
- T ≤ 1 300°C
- Maximum viscosity of the fluid
- 0.2 Pa.s
Documents
Similar products from DELTAFLUID
DELTAFLUID
France
Actor in the field of instrumentation, Deltafluid offers measurement products in pyrometry. Our range includes thermometers to obtain direct indications of temperature but also temperature sensors (resistance probe, thermocouple, multi-point probe, pyrometer assembly ...) which can be coupled with transmitters.
DELTAFLUID
France
Instrumentation accessory for setting and commissioning the measuring instrument A manifold is mounted to the interface between the pressure taps and the transmitter. It is used to isolate the transmitter in case of intervention on the pipe. It also allows you to reset the zero of the transmitter or purge the impulse taps.
