Control foot switch - F series

The aluminium pressure die-cast protective shroud (F3: aluminium sand casting) fully shields the pedal at the top and sides while the wide base provides a high degree of stability. It reliably prevents accidental operation from above by falling objects or careless operation from the side. Due to its robust construction the protective shroud withstands a drop of 20 kg from a height of 1 m. The foot switch is uniquely designed to allow inclusion of additional equipment: — Emergency Stop button — Contactor on DIN rail as main power switch — Customized installations (e.g. light indicators)

The position switches MN78 are the successful answer to an increased demand of the market. The contacts of these new series are specially designed for switching low currents. The MN78 is a completely metal version of the position switch, which scores points for reliably fulfilling its task even in harsh environments, outdoors or under high mechanical stress. • High reliability at low currents (1 mA / 24 VDC) • Up to 4 contacts • Enclosure: Die-cast aluminium • Cover: Aluminium • Easy turning (8 x 45° ) and changing of the actuators without a tool • Standard switch and standard actuator according to DIN EN 50041 • Protection class IP66 and IP67 according to EN 60529

Thanks to their standard dimensions as well as the wide range of contacts, the IN62 switches can be used on safety facilities and for position monitoring in virtually any industrial application.Only available with plunger actuator. Standard switches conforming to DIN EN 50047 High reliability at low currents (1 mA) Protection class IP67 Hinged snap-on cover

Impressive development of the SHS series is assured with the design of the SHS3 switch. Having to replace the safety hinge switch whenever the equipment is bumped or damaged due to mechanical stress is unnecessary thanks to the solution offered by the SHS series. The hinge setting can be corrected even after the switching point is set. This process can be done with the assistance of the integrated adjustment system. The hinge switch is also reusable even when the system itself needs to be converted. Thanks to change kits, the operator can redefine the switching point without compromising the IP 67 protection rating.