EID - Fabricant de liaison frigorifique pour la climatisation

or the service of installation technicians, eid exercises strict quality control on the copper, coils, bars, REFNET® refrigerant tubing. Here are a few explanations: THE TECHNICAL PROBLEM Technical performance of the air conditioning and refrigeration systems with the new refrigerant fluids (R410A, R32, etc.) is considerably reduced by the effect of the residual mineral oil used in the manufacture of ACR tubes ACR, used for heat exchangers and refrigerant tubing. THE SOLUTION Installing SUPERCLEAN tubes guarantees less residue inside the tubes. The internal residue ratio, defined as 0.1 mg/m, is only one sixtieth of that of conventional tubes. This means that there is no need for future cleaning of the exchangers and tubing, thus increasing the performance of the air conditioning and refrigeration systems. Our copper is manufactured using Grade A cathodes.

The Bi TUBES is an assembly of 2 insulated tubes, joined by the insulation. It allows both diameters to be in sertedin one operation when installing The extruded PE insulation provides excellent resistance to tearing and the right density. Already available in 1/4-3/8, we shall be offering 1/4-1/2 within the next few weeks, followed by the other diameters during the year. Euroclass certification currently being studied.

Industrial companies, System designers, Big tube consumers! It is estimated that, on average, more than 2 metres of offcuts are lost from a 20-metre reel! i.e. on average, more than 10% of each reel is lost… The solution? Large reels, containing from 100 metres to 400 metres, that can be stored, transported, unwound and easily cut, directly on the site. Eid can manufacture, as usual, any reel up to 1000 metres in bi-tube, if needed, but what we are offering here is "standard" large reels: The 100m coils are supplied conventionally (film-wrapped coils), the 300/400m lengths are supplied on wooden reels with a deposit (to be returned to eid) and retailing dispensers for those requiring them.

The insulated tube is used to manufacture tubing. In the 0.7mm version, it is more economical for an equivalent quality (SUPERCLEAN) In 30 or 50m coils in Mono and 20, 25 or 30m in insulated Bi-tubes, it can be cut and flared on the site.The insulated copper coil offers the advantage of being independent on-site and tubing can be cut to the required length.Tubes are already insulated which saves time during installation.For UV resistance of insulation outdoors, use paint PIN75 (page 15)

The insulated tube is used to manufacture tubing. In the 0.7mm version, it is more economical for an equivalent quality (SUPERCLEAN) In 30 or 50m coils in Mono and 20, 25 or 30m in insulated Bi-tubes, it can be cut and flared on the site.The insulated copper coil offers the advantage of being independent on-site and tubing can be cut to the required length.Tubes are already insulated which saves time during installation.For UV resistance of insulation outdoors, use paint PIN75 (page 15)

The Bi TUBES is an assembly of 2 insulated tubes, joined by the insulation. It allows both diameters to be inserted in one operation when installing.The insulation looks good, does not attract dirt, offers an excellent resistance to UV and to pinching.

1200*800*1850

1200*800*1740 800*800*2000 Add an "F" to the 3 letters of the reference (ex. TIBF instead of TIB)

800*800*2000 Add "FT" to the 3 letters of the reference (ex. TIBFT instead of TIB

The insulated tube is used to manufacture tubing. In 20, 25, 30 or 50m insulated coils, it can be cut, flared or crimped on-site.The copper coil offers the advantage of being independent and can be cut to the required length.Tubes are already insulated which saves time during installation. For UV resistance of insulation outdoors, use paint PIN75 (page 15)