FILTERTECHNIK JÄGER GMBH - liquid filtration

The new Cora®Pleat element is a self-developed product, which is produced in a specifically built production line in Weißenhorn. In this way, Filtertechnik Jäger provides you with products that are developed and manufactured in Germany. Cora®Pleat filter elements are designed for usage in conventional and widely used bag filter housings. The use of folded filter material and the application of a special design and production method, results in filter elements which not only make the bag filter system considerably more effective, but also decisively improve profitability. Bag filters are characterized by a user-friendly application. The previously known disadvantage of the relatively small available filter area is cancelled by the Cora®Pleat element.

Cora®Oil is an oleophilic polyster fleece and a unique technical innovation! Cora®Oil is a high quality thermally bonded polyester nonwoven and capable of separating oil and water. This allows oils to be completely filtered out of water. Another advantage: Cora®Oil can be used in all common band filters.

Cora®Spun is a high-quality polyester spunbond, which is thermally bonded and has a high tensile strength in the longitudinal and transverse direction. It is a suitable universal medium for surface filtration and precoat filtration.

The point bonded polyester fleece Cora®Dot is ideally suited for filtration of rolling oil by using of precoating agents.

The polyester high-performance fleece Cora®Deep has a fibre matrix of fine and very fine fibres. Compared to conventional fleeces, it also has a larger layer thickness. Due to the very large amount of "free pores" Cora®Deep achieved above-average dirt-holding capacity (depth filtration). The controlled thermal stabilisation of the high-performance nonwoven allows a classified separation of the particles (large, medium, fine). The Cora®Deep nonwovens are subjected to a novel surface treatment process in order to meet the increasing requirements for a minimum fibre release of filter fabrics: Glazing - a combination of flames and calendering. This means that even the finest particles (5μ, 2μ) are retained.

The technical revolution in fleece filtration: Cora®Perform's special fibre texture is a unique space depth matrix. The dirt absorption capacity of the polyester high-performance nonwoven fabric exceeds that of conventional nonwovens by a multiple; therefore Cora®Perform can absorb a much larger amount of solids. Filter cake formation and lower cycle times result in a high separation efficiency and extremely low fleece consumption. With Cora®Perform polyester high-performance fleeces from FTJ you bet on a durable product and produce less waste. This saves the environment and saves costs.

Cora®Jet is a water jet bonded polyester fleece. It is characterized by a very uniform fibre structure. The large material thickness also supports the deposition of the particles in the depth of the filter medium.

For the most cost-effective filtration: The binder-strengthened (chemically bonded) viscose fibres from Cora®Visk have a high pore volume and are therefore ideal for coarse and medium fine filtration.

The thermally and mechanically bonded polypropylene fibres of the Cora®Pro nonwovens ensure very high strength and enormous dimensional stability despite the low surface weight. They have good chemical resistance.

Special FTJ filter fleeces are particularly suitable as precoat or support fleece on horizontal plate pressure filters or plate filters The following precoat agents are used: Diatomaceous earth Bleaching earth Cellulose Cornmeal The FTJ nonwovens Cora®Dot and Cora®Spun effect corresponding savings on precoat agents with extremely fine filtration.