FINN HOLDING APS

The F.E.B.A. automatic logging system was designed to unwind/rewind adhesive backed materials, paper, styrene, foils, woven and non woven, rubber, foam and other like materials. This logger is designed to accommodate master logs up to 1000MM in outside diameter with widths up to 1700MM (Standard Size Special Applications Available). MACHINE'S MAIN FEATURES Maximum material width is 1700MM. (Special Sizes Available) Maximum OD of the master jumbo log is 1000MM. (Special Sizes Available) Maximum OD of the rewound logs is 420MM. (Special Sizes Available) Working speeds from 0 120 meters per minute. (Other upon request) Rotary turret with two pneumatic shafts. Core inside diameters available in 1.5" or 3". Pneumatic jumbo roll shaft for 1.5" or 3" cores. Contrast jumbo roll and winding shafts The unwinding tension is adjustable with a pneumatic brake and a servodiameter valve. Path rollers coated in ceramic. (Plasma Coating)

F.E.B.A. Laminating System is suitable for laminating, slitting and rewinding heat activated or cold bond adhesive products to fabrics, foam/rubber, soft foam, cork, felt and similar materials. Standard and special machines available to suit the customers specific converting application. UNWIND UNIT The unwind unit is composed of one station for the axial unwinding of the master logs. Manual web guide left and right. One 3" removable pneumatic shaft and brake. DRAWING UNITS The first drawing unit is composed of two large diameter siliconized rubber covered rolls; suitable for the unwinding of high and low thickness foam rolls. The second drawing unit is composed of two large diameter siliconized rubber covered rolls and will be equipped with a separate brake and clutch to be used when laminating very thin elastic materials or slitting narrow widths. UPPER UNWIND The upper unwind is to keep the single sided tape to be transferred. Manual web guide left & right.

F.E.B.A. model F400 single knife automatic log slitter suitable for slitting adhesive & non adhesive tapes, kaptons, dense foams, PPL, PE, textiles, non wovens, TNT and similar materials with an outside diameter of 400mm. Standard features like sonar & laser technology allow for a fully automatic slitting cycle drastically reducing log changeover time. Proportional penetration speeds coupled with an automatic blade 'AXIS' angle offer the highest quality cut available. The model F400 can be equipped with a variety of optionals designed to enhance productivty and limiting operator fatigue. TECHNICAL SPECIFICATIONS Material Width 1.200 3.100mm Maximum Log OD 400mm Slitting Width 2mm 3.100mm Indexing Tolerance ± 0.05mm Blade Speed Range 10 1200RPM Material Speed Range 10 1200 RPM ALL F.E.B.A. SLITTING AND REWINDING SYSTEMS ARE MANUFACTURED IN ACCORDANCE WITH EUROPEAN EEC SAFETY AND HEALTH STANDARDS.

Metal Bandsaw Blades all products