Germany
Manufacturer/ Producer
Germany
Safety cutting unit consisting of: Hydraulic power unit cube Integrated pressure gauge up to 1000 bar 10m High pressure hydraulic hose (metal free ), firmy connected to the cutting head Superlight cutting head ipr50HS Remote Control 3m Power charger 3m User manual Tool case The total weight of our 95 securty system weights about 17 KG and not 30 KG!
Request for a quoteGermany
Technical data UNI FUTURE with pressure transducer Pressure needs detection with switch-off upon reaching the required working pressure of 20 bis 850 bar Suitable for all tools with a oil flow to 700cm³ With built-in-pressure sensors for enhanced features and advanced settings Jogging for intermittent tool feed Power stepless adjustable, short time possible to 1,2 kW For Network and battery (24/230V) Powerful Li-Ionen battery 24 V 4,8 Ah The unit is designed so that the battery capacity is sufficient for one working day. Integrated charger Energy savin mode – Unit switches off 10 minutes after the last activity, or to low battery charge Shutdown at idle after the working cycle, prevents tool damage and saves energy Robust plastic housing Controls and coupling are set back behind the front edge of the housing Flow rate: automatically adjust to 1l/min Size L/B/H: 215 x 165 x 220mm (Handle height 40mm) Weight: ca. 6,9 kg SUPPLIED WITH Hydraulic power unit 3m Remote control 3m Power charger adjustable shoulder strap instruction manual
Request for a quoteGermany
Technical data UNI FUTURE 2050 SCU Also as a drive towards a cutting system Automatic detection with switch-off pressure required for achieving the required operating pressure of 20 bis 700 bar Suitable for all tools with a oil flow to 700cm³ With pressure gauge (1000 bar) and ground connector on the front side With pressure sensors for advanced features Detection tool with speed adjustment to (tool speed 10mm/sec) BG provision to fulfill Optional jogging for intermittent tool feed. Power adjustable,short time possible to 1,2 kW ch Network and battery (24/230V) Powerful Li-Ionen Battery 25,2 V 4,8 Ah The unit is designed so that the battery capacity is sufficient for one working day. Integrated charger Energy spaving mode– 10 minuets after the last activity or to low battery condition, switches off the unit Shutdown at idle after the working cycle, prevents tool damage and saves energy Robust plastic housing Controls and coupling are set back behind the front edge of the housing Flow rate: automatic adjustment to 1l/min Size L/B/H: 222 x 168 x 229mm (Handle height 40mm) Weight: ca. 6,9 kg Supplied with Hydraulic power unit 3m Remote control 3m Power charger adjustable shoulder strap instruction manual
Request for a quoteipr WERKZEUGE is a manufacturer of hydraulic tools. Innovation is our passion and new developments are our speciality. This is what sets us apart. ipr WERKZEUGE can rely on personal expertise resulting from many years of experience in developing, producing and distributing industrial tools and accessories in the field of electrical power supply and in tool technology in general. ipr – experience and expertise that you can use. We produce tools "MADE IN GERMANY" for you with great delight and success in the Upper Franconian town of Neustadt near Coburg and provide services such as maintenance and repair of all hydraulic tools. This makes us one of the last proud manufacturers of this range of tools in Germany. Over the past few years we have once more revised our entire modern product range and optimised it for you.
Italy
In the marine sector, as in the infrastructure sector, the ability to operate in salty and highly corrosive environments is crucial, which is why materials such as stainless steel and double nickel and chrome coatings are often required for certain applications. Here are some application examples of cylinders that have been manufactured specifically for this area of use. HIDROMEC develops hydraulic cylinders and systems for maritime applications that are reliable, durable and comply with the relevant environmental standards.
Request for a quoteItaly
Civil engineering is the branch of engineering responsible for the design of artefacts and infrastructures for civil use and thus for all related fields: civil engineering, hydraulic engineering, geotechnics, infrastructure, structural engineering, urban planning. Hydraulic engineering is characterised by hydraulic applications that operate in very demanding areas with a high risk of wear: River dams, locks and weirs require cylinders that are operational under water. The use of piston rods made of stainless steel material and/or rods with NiCr or ceramic coatings are often required for these applications Hidromec develops hydraulic cylinders and systems for hydraulic engineering applications that are reliable, durable and comply with the relevant environmental standards.
Request for a quoteItaly
The steel industry is a specific sub-sector of the stationary industry. The term steelmaking refers to a specific area of metallurgy that involves the technique of processing iron-rich ore to produce iron or various types of ferrous alloys, including steel, pig iron and alloy steels. The steel industry needs very reliable and robust equipment: no malfunction is allowed. Rolling mills and furnaces must not be stopped by a defective hydraulic cylinder. The main features of the cylinders used in this sector, apart from ensuring high reliability, are that they are designed to operate in dusty environments and at very high ambient temperatures, even above 100°C. This makes it necessary to equip the cylinders with seals that retain their functionality even at such high temperatures. Seals and gaskets made of special fluorocarbonate material (Viton) are used. HIDROMEC develops hydraulic cylinders and systems for applications in the steel industry that are reliable, durable and comply with the relevant environmental standards.
Request for a quoteItaly
Hydraulic cylinder applications in the stationary industrial sector are diverse: hydraulic presses of all kinds, ranging from presses for sheet metal forming and presses for the plastics industry to filter presses and scrap presses. Roll forming machines are also included, as well as machines and industrial equipment of various kinds. Equipment in constantly changing shapes and sizes gives us the opportunity to apply the design know-how we have acquired over forty years of dedication to meeting a wide variety of customer requirements. Hidromec develops hydraulic cylinders and systems for equipment with applications in the industrial sector that are powerful, durable and comply with the relevant environmental standards.
Request for a quoteCreate one request and get multiple quotes form verified suppliers.