LANTECH - Expert in case & tray handling equipment

Non-Standard Case Dimension Machine can be modified for a variety of case dimensions. Please contact Lantech for details. Communication Various communication configurations possible. Please contact Lantech for details. Stainless Steel Frame or Components Please contact Lantech for details. Exit Height Extension The exit height of the cases can be extended to 850 mm (33 1/2"). Tape Head Storage Bracket Holds additional tape head. Custom Options Many options available for case types and dimensions, speeds, closing methods, machine frame and magazine, and machine performance data communications are available. Please contact Lantech Customer Support if your requirements are not satisfied by the options published on this page. Beacon Colored lights indicate the status of the machine, blanks supply, and tape or hot melt supply. Acoustic Signal An alarm sounds to indicate the presence of a fault condition. 75 mm (3") Tape Head Applies 75 mm (3") wide tape. Replaces Standard 50mm tape...

Extended Wrap Height Increase the wrap heights of your loads. Replace the 203 cm (80") mast with a 279 cm (110") mast. 220 V - 50/60 Hertz 15 AMP Adds a transformer to the machine. Cold Environment Operate in temperatures below -1 C to -18 C (+31 F to 0 F). Corrosive Environment Operate in corrosive environment. It is for machines with exposure to agents such as salt and fertilizer. Freezer Environment Operate in temperatures of -29 C (-20 F). "Non Powered" Conveyor The maximum load weight is 1814 kg (4000 lb). The maximum load dimensions are 1524 mm L x 1321 mm W (60" x 52"). Note: This is for machines with the "Load on Turntable" option only. Note: You can add 1 or 2 sections of conveyor. "Non Powered" Turntable Conveyor The maximum load weight is 1814 kg (4000 lb). The maximum load dimensions are 1702 mm L x 1321 mm W x 1905 mm H (67" x 52" x 75"). The pass height is 178 mm (7"). Auto Film Cut-off™ Automatically cuts the film at the end of the wrap cycle. This decreases labor...

Extended Wrap Height Increase the wrap heights of your loads. Replace the 203 cm (80") mast with a 279 cm (110") mast. 220 V - 50/60 Hertz 15 AMP Adds a transformer to the machine. Cold Environment Operate in temperatures below -1 C to -18 C (+31 F to 0 F). Pallet Grip® Makes a "cable" of film that locks the load to the pallet. The film cable decreases the risk of damage during shipment. Click-n-Go® Remote Control Start or stop the machine from the forklift or other location. Note: You can use the remote for multiple machines. NEMA 12 Enclosure Keeps moisture, dust, and dirt from electrical components. Ramp Put the load on the turntable with a forklift or a pallet jack. EZ Weigh™ Integrated Scale Weigh and wrap loads in one step with a scale built into the turntable. Forklift Stop Helps the operator align the load on the turntable. Pit Mount It lets the operator put the load on the turntable at floor level. This is available for 1651 mm (65") and 1829 mm (72") turntables. Note:...

Extended Wrap Height Increase the wrap heights of your loads. Replace the 203 cm (80") mast with a 279 cm (110") mast. 220 V - 50/60 Hertz 15 AMP Adds a transformer to the machine. Cold Environment Operate in temperatures below -1 C to -18 C (+31 F to 0 F). Corrosive Environment Operate in corrosive environment. It is for machines with exposure to agents such as salt and fertilizer. Wrap Arm Speed 1-15 RPM Allows the wrap arm to rotate up to 15 RPM. Note: This option includes Power-Roller Stretch Plus and increases the pre-stretch to 250%.

Extended Wrap Height Increase the wrap heights of your loads. Replace the 203 cm (80") mast with a 279 cm (110") mast. 220 V - 50/60 Hertz 15 AMP Adds a transformer to the machine. Cold Environment Operate in temperatures below -1 C to -18 C (+31 F to 0 F). Corrosive Environment Operate in corrosive environment. It is for machines with exposure to agents such as salt and fertilizer. Click-n-Go® Remote Control Start or stop the machine from the forklift or other location. Note: You can use the remote for multiple machines. Wrap Arm Speed 1-15 RPM Allows the wrap arm to rotate up to 15 RPM. Note: This option includes Power-Roller Stretch Plus and increases the pre-stretch to 250%.

Extended Wrap Height Increase the wrap heights of your loads. Replace the 203 cm (80") mast with a 279 cm (110") mast. High Speed Package Increase the speed of the turntable to 25 rpm. 6,000 LB Capacity Turntable Increase the weight capacity of the turntable to 2721 kg (6000 lbs). Load Seeking Clamp Eliminates the beginning film tail. Replaces the jam clamp with a vacuum clamp that pivots out to the load. Cold Package Cold Package option allows efficient operation of stretch wrapper in an environment where the temperature range is +31 to +10 degrees Fahrenheit. Freezer Package Operate in temperatures of -29 C(-20F). Modular Electric Top Platen Stabilizes tall, lightweight or unstable loads during the wrap cycle. Corrosive Duty Package Operate in a corrosive environment. It is for machines with exposure to agents such as salt and fertilizer. Turntable Washdown Use water at "city pressure" to clean the turntable. Make sure that the water can drain from the area.

Cold Package Cold Package option allows efficient operation of stretch wrapper in an environment where the temperature range is +31 to +10 degrees Fahrenheit. 750 MM Metered Film Delivery System For customer applications where 30” wide film is used. 25 RPM Package Wrap arm rotation is increased to 25 RPM. Includes PowerFlex 40 variable frequency drives, additional fencing, visual barriers (Yellow Railroad Gates) at the infeed and exit transition, and a larger machine frame. 35 RPM Package Wrap arm rotation is increased to 35 RPM. Includes PowerFlex 40 variable frequency drives, additional fencing, visual barriers (Yellow Railroad Gates) at the infeed and exit transition, and a larger machine frame. 40 RPM Package Wrap arm rotation is increased to 40 RPM. Includes 9/5/9 standard spaced conveyor layout with variable speed drive control and conveyor speeds of 60-90 FPM (high speed staging). Includes additional fencing and safety light guards. Top Sheet Dispenser Two to four mil poly...

Cold Package Cold Package option allows efficient operation of stretch wrapper in an environment where the temperature range is +31 to +10 degrees Fahrenheit. 750 MM Metered Film Delivery System For customer applications where 30” wide film is used. 25 RPM Package Wrap arm rotation is increased to 25 RPM. Includes PowerFlex 40 variable frequency drives, additional fencing, visual barriers (Yellow Railroad Gates) at the infeed and exit transition, and a larger machine frame. 35 RPM Package Wrap arm rotation is increased to 35 RPM. Includes PowerFlex 40 variable frequency drives, additional fencing, visual barriers (Yellow Railroad Gates) at the infeed and exit transition, and a larger machine frame. 40 RPM Package Wrap arm rotation is increased to 40 RPM. Includes 9/5/9 standard spaced conveyor layout with variable speed drive control and conveyor speeds of 60-90 FPM (high speed staging). Includes additional fencing and safety light guards. Top Sheet Dispenser Two to four mil poly...

Cold Package Cold Package option allows efficient operation of stretch wrapper in an environment where the temperature range is +31 to +10 degrees Fahrenheit. Top Sheet Dispenser Two to four mil poly film, 80" wide is automatically applied over the top of load for moisture and dust protection. In-line top sheet dispenser model applies and secures sheet of film over load as it indexes into the wrap zone with no interruption to the wrapping cycle. Mid-wrap top sheet dispenser applies and secures sheet of film over top of load during the wrapping cycle. Load is protected with five-sided coverage. Conveyor Sections Available in 5' sections and 10' and 12' wrap zone sections. Close-spaced and tight-spaced conveyor rollers. Standard and non-standard pass heights. Includes safety fencing and additional safety photocells mounted on the safety shield. Additional Wrap Height Capacity For wrapping loads which exceed the 80" wrap height capacity of the standard system. Will handle loads up...

Non-Standard Case Dimension Machine can be modified for a variety of case dimensions. Please contact Lantech for details. High Speed Increases speed to maximum of 25 cases per minute. Please contact Lantech for details. Communication Various communication configurations possible. Please contact Lantech for details. Stainless Steel Frame or Components Please contact Lantech for details. Exit Height Extension The exit height can be extended. Tape Head Storage Bracket Holds additional tape head. 3in Tape Head Applies 3" wide tape. Replaces standard 2" tape head. Extended Magazine Increases the number of blanks the magazine holds. Short Magazine Decreases the number of blanks the magazine holds. Custom Options Many options available for case types and dimensions, speeds, closing methods, machine frame and magazine, and machine performance data communications are available. Please contact Lantech Customer Support if your requirements are not satisfied by the options published on this page.