NICKO'S CONSTRUCTION

Discover the most efficient solution for any slab terrace installation. The UNIKA pedestal is height-adjustable from 40 to 60 mm. It can be raised to a height of up to 1 meter using the extension accessory. The height can be easily adjusted to the nearest millimeter using the adjustment ring: from the top by using the YEED Tightening key, or manually from the side. The UNIKA pedestal is an all-in-one revolution. the noise buffer accessory is integrated directly onto the pedestal head, and the red clamping ring makes the head self-levelling or fixed.

The slab pedestal is a support designed for the realization of the foundations of a terrace in slabs. Adjustable in height from 90 to 150 mm, it allows the installation of raised terraces. The size of the pedestal is adjusted to the millimeter using the red screw. The head of pedestal for slab is composed of 4 pins allowing the correct placement of the slabs as well as their maintenance. The slab pedestal allows the installation of a coating of the slab, tiling or grating type. Note it is imperative to use a coating with a minimum thickness of 2 cm or more. The installation of the slab terrace on pedestals is carried out on a loose and stable ground in order to guarantee the solidity of the structure. A slab requires 4 pedestals, i.e. 1 at each corner, with possibility of adding one in the center by removing the lugs with the pliers.

The adjustable slab pedestal is a support for making the foundations of a terrace raised. It is placed directly on a soft and stable ground without requiring fixing. The slab pedestal can be adjusted to the nearest 150 to 260 millimeter using the red screw. The head of the paving pedestal has 4 lugs which ensure that the slabs are held in place. Their place defines a regular spacing between each of them. The slab pedestal can accommodate a slabshaped coating whether it is tiling, ceramic or gratings. Use only a coating measuring 2 cm thick at least. To define the number of pedestals required, 4 pedestals are needed for 1 slab. Thus, the pedestals are position cladding tiles for terrace at each angle. If you use tiles of large dimensions, it is possible to place an additional stud in the center of it by cutting the dewclaws on the head.

The blades spacers allow you to obtain a regular spacing of the wood planks for terrace. This accessory for wooden decks helps prevent the natural movements of the wood can damage the installation, promote good air circulation and water evacuation. The deck board spacer is made up of 4 sides of different thicknesses 4, 5, 6 or 7 mm. The spacing of your deck boards between 4 and 7 mm must take into account the type of wood of the coating, the climate to which the terrace will be exposed as well as the desired aesthetic appearance. This easy and practical accessory ensures the durability of your deck. RINNO PLOTS “blades spacers” are made in France.