PLANT OF TECHNOLOGICAL EQUIPMENT, LLC

The dissolver is hydraulic, single-column, floor-mounted. We can offer such a machine with the power of the main engine (cutter) - from 7.5; up to 75.0 kW., 380 V. for replaceable vessels of 100 to 1500 liters. Electrical equipment can be made in a general industrial or explosion-proof design. The dissolver is equipped with a hydraulic drive for lifting the traverse, on which the shaft with the tool and the lid are mounted. All parts that are in contact with the product are made of food or technical stainless steel (customer's choice). Turnovers are regulated from 50 to 1500 rpm. (possibly from 50 to 3000 rpm) using a frequency converter. For more viscous products, it is possible to manufacture a dissolver with two or three working shafts, one of which will have a milling cutter, and the other will have a low-speed stirrer, for example, an anchor type with cleaning elements, and on the third - a high-speed stirrer.

Dissolver, compact, with one or two shafts, for premises with a low ceiling. It is supplied with an electromechanical lifting of the tool. It is intended for vessels with a volume – from 30 to 500 liters. An electric motor’s power – from 2.2 kW to 11kW, the turnovers – from 100 to 1500 (3000) rpm, 380V. It is carried out in both, Ex and IP design. A milling cutter can be installed on one shaft and a stirrer of the required type can be installed on another shaft.It is possible to produce a dissolver, providing vacuum in the working area.

Stationary dissolvers, volume from 50 to 5000 liters. The power of the main electric motor is from 1.2 up to 150 kW. The rotational speed is adjustable from 100 to 1500 rpm. or from 100 to 3000 rpm., on legs or overpass, with weight equipment,etc. Can be equipped with various tools.

Vacuum dissolver with one, two or three shafts. It is intended for vessels with a volume – from 50 to 1200 liters. It is manufactured on the basis of the above mentioned dispersers: near wall (floor) dissolver, compact dissolver or dissolver with hydraulic lifting of the tool. Power of the main engine – from 3.0 to 55 kW, speed of main working shaft – from 100 to 1500 (3000) rpm. It is carried out in both, Ex and IP version, with one main working shaft (milling cutter), with two working shafts (milling cutter and slow-moving anchor agitator with elements cleaning walls of a vessel) or with three working shafts (a milling cutter, a slow-moving stirrer and a fast moving stirrer of butterfly type).