SIA ATTA-1

Very small installation depth: < 20 mm Without claws. With rotary control, two-way switch and soft-catch. 2-wire connection (neutral conductor not required) Optimised for dimming of retrofit LED lamps (LEDi). For dimmable Retrofit-LEDs (LEDi). For dimmable Retrofit-LEDs (LEDi) with conventional or electronic transformers. For incandescent lamps, 230 V tungsten halogen lamps, low-voltage halogen lamps with conventional or electronic transformers and dimmable energy-saving halogen lamps. Mix operaton of LEDi with conventional loads possible. With manually adjustable operating mode: trailing / leading edge control. With adjustable minimum/maximum brightness. Low-noise level by MOSFET transistors. With electronic short-circuit protection. With electronic overload protection. Without cover plate. Rated voltage: 230 V~, + 10% / - 10% Rated frequency: 50 Hz/60 Hz Nominal power: 2 - 100 W/VA (leading edge control) Nominal power: 2 - 400 W/VA (trailing edge control)

With rotary control, two-way switch and soft-catch. 2-wire connection (neutral conductor not required) Optimised for dimming of retrofit LED lamps (LEDi). For dimmable Retrofit-LEDs (LEDi). For dimmable Retrofit-LEDs (LEDi) with conventional or electronic transformers. For incandescent lamps, 230 V tungsten halogen lamps, low-voltage halogen lamps with conventional or electronic transformers and dimmable energy-saving halogen lamps. Mix operaton of LEDi with conventional loads possible. Via mode switch adjustable between leading edge control and trailing edge control. Low-noise level by MOSFET transistors. With electronic short-circuit protection. With electronic overload protection. With adjustable minimum brightness. Without cover plate. Rated voltage: 230 V~, + 10% / - 10% Rated frequency: 50 Hz/60 Hz Nominal power: 2 - 100 W/VA (retrofit LED loads). Nominal power: 10 - 250 W/VA (non-LED loads).

This double ended Halogen lamp has a brilliant ECO accent lighting, it is dimmable and it is a direct replacement for standard tubular halogen lamps, but with lower thermal output and CO2 emission. It doesn’t require a transformer and it can be thrown away with normal household waste, as it contains no mercury. 2,000 hours Average life Dimmable Color rendering index Ra: 100 Base: R7s

High pressure sodium lamp 100 Watt. Increased luminous flux compared to standardhigh pressure sodium lamps. Centrally-located, durable ceramic arc tube withintegrated strike bar and sodium-amalgam filling. For ignitors from 4 to 5 kV. Maximum lamp diameter 46 mm,maximum length 211 mm. E40 base, nickel-plated brass for corrosionresistance. Nominal luminous flux 10,000 lm. Luminous efficacy 100 lm/W. Light depreciation less than 20%after 16,000 hours of operation. Early failure rate less than 5%after 16,000 hours of operation. Average lifetime 28,000 hours of operation.

Basic 55 IP20

Category: Halogen Series: Single Envelope Wattage: 60 W Base: Ba15d Voltage: 240 V Lumens: 980 lm Colour Temperature: 2800 K

Category: Halogen Wattage: 205 W Base: E14 Voltage: 240 V Lumens: 4200 lm Colour Temperature: 2800 K

Category: Halogen Wattage: 70 W Base: E27 Voltage: 240 V Lumens: 1175 lm Colour Temperature: 2800 K

Category: Halogen Wattage: 70 W Base: E14 Voltage: 240 V Lumens: 1180 lm Colour Temperature: 2800 K

Category: Halogen Wattage: 150 W Base: E27 Voltage: 240V Lumens: 2780 lm Colour Temperature: 2800 K