STRATE BEV-F for fine ventilation
Description
The BEV-F is a single-stage valve offering only the function of the second ventilation stage (fine ventilation) provided by the two-stage valve (BEV-GF). For ventilation quantities of 20 to 40 m3/h. Specific applications include high points which are under hydrostatic pressure even when the pump is shut down due to the height variation involved, and where no coarse ventilation is required, as well as at high points with low flow quantities. Type F (fine ventilation): Air escapes through this valve, and collected gases cause it to open once again, including under operating pressure, until the medium continues to flow and close the valve again. Installed at high points which are under hydrostatic pressure even when the pump is shut down due to the height variation involved, and where no coarse ventilation is required. Installed at high points of pressure lines with low flow quantities.
- Water - production and distribution
- Bev Strate
- Strate Valves
- Ventilation Strate
Product characteristics
- Housing
- EN-JS1030, 1.0038
- Coating
- EGD
Similar products from STRATE TECHNOLOGIE FÜR ABWASSER GMBH
STRATE TECHNOLOGIE FÜR ABWASSER GMBH
Germany
Two-stage ventilation valve for release rates of 450 to 2000 m3/h in coarse and 20-40 m3/h in fine ventilation. For DN 80 and 100 housing material: EN-GJS-400-15, coating EKB; for DN 150 housing material S235 JR or P355 T1 and the coating consists of a wastewater-resistant Permacore thick micaceous iron ore coating First, air escapes during the first stage (coarse ventilation), until the medium closes off the first stage as it continues to flow. Any remaining air then escapes more slowly through the second stage (fine ventilation), until it is also closed. Gases collect, causing the fine ventilation to open once again until the medium closes this stage as well as it continues to flow.
STRATE TECHNOLOGIE FÜR ABWASSER GMBH
Germany
The BEV-G is a single-stage valve offering only the function of the first ventilation stage (coarse ventilation) provided by the two-stage valve (BEV-GF). It is not necessary to coordinate the valve to the working pressure in the first ventilation stage, since coarse ventilation is always closed under pressure. Type G (coarse ventilation): The air escapes through this valve until the medium closes it as it continues to flow. The valve remains closed under operating pressure. Ventilation of individual sections in sloped pressure lines, especially as a low pressure safety feature Quick ventilation of high points if fine ventilation is not required (short pump run times)
STRATE TECHNOLOGIE FÜR ABWASSER GMBH
Germany
The special lightweight aluminium design and silicone inserts of STRATE sandwich non-return valves SB makes them ideal for: Conveying air and gases up to temperatures of 200 °C Working pressures up to 4 bar Special applications with other valve insert materials on request
STRATE TECHNOLOGIE FÜR ABWASSER GMBH
Germany
STRATE valve shafts are used in industrial and municipal areas. The different design sizes of the STRATE AWALIFT valve shafts allow the optimum size to be assigned to every individual purpose. Pipe and cable ducts, which are located exactly according to customer specifications in the manufacturing plant, meet all requirements for an exact fit, safety and ease of maintenance. Optimum, safe installation locations for valves and system components whose size allows them to be housed in a shaft Are excellently suitable as inspection shafts with flushing connection, as feeding points for AWAaerob ventilation systems, for ventilation and bleeding valves, for pig traps etc. Are made of high-quality, durable and waterproof materials with a high material strength and low material weight, with the design permitting short installation times and excluding complex