secutex Impact Protection for screwing This is our top seller – secutex buffer pad with a perforated plate. Easy and flexible to use and can be fixed reliably with the perforated plate as reinforcement. In this way, you will have a universal impact protection in a short time. Size and quantity of the drill holes depend on the substructure and must be specified on site. Selection of the screws We recommend screw sizes up to a maximum of 6mm, any larger dimension does not provide additional strength in combination with the castin perforated plate. As screws we recommend hexagon socket screws with low head according to DIN 7984 or DIN 6912. Not recommended Countersunk screws; inefficient transfer of the force into the impact protection, Bolts with hexagon head; the nut grips the bolt on the outside, the borehole must be much larger for this. Normal screws with hexagon socket; the screw head is significantly higher, the impact protection must be thicker
Germany
Install impact protection For screwing and riveting secutex impact protection with an internal perforated plate can be screwed or riveted in different ways. You can achieve universal impact protection in no time at all. For welding Welding is often the easiest and fastest way of fastening. The various protruding perforated sheet designs allow a very versatile use. For gluing If screwing or welding is not possible, the impact protection can be glued with the secutex special adhesive. Cutting and sawing The secutex material can be sawed with a conventional band saw. The material tries to avoid the cutting tool. Make sure that the wedge angle is as small as possible and adjust the cutting speed if necessary. Milling Use commercially available milling cutters with a small number of teeth. Circumferential speed approx. 200400 m / min, clearance angle ∂ 10 °, clamping angle y 25 °. The use of a drilling emulsion is recommended for cooling and surface optimization. Rotate
Request for a quoteGermany
The secutex forkshank protection is a special design with a hollow profile and foam insert. For example, it is suited to the transport of delicate drums on EURpallets. The colliding of the drums is absorbed through the flexible foam padding, whilst the impact of the pallet is absorbed through the sturdy hollowprofile design. Usages include, for example, transport in the chemical or glass industries. The forkshank protection is attached to the fork shanks via steel bands and is thus easily exchangeable.
Request for a quoteGermany
Sometimes, the load rests upon the shank of the fork during transport. In these cases, transported goods and the fork shank must be protected from damage. secutex forkshank protection with foam padding is designed for careful load transportation. The degree of compression of the foam is dependent upon the collision. The foam reforms after the stress has subsided. Usages include, e.g. transport of sensitive dry walls, roofing tiles, etc. The forkshank can be fastened with a steel belt to the back of the fork and can be easily exchanged.
Request for a quoteGermany
Sometimes, the load rests upon the shank of the fork during transport. In these cases, transported goods and the fork shank must be protected from damage. The secutex forkshank protection with a hollow profile is a robust version designed to protect the transported goods. The hollow chambers have a cushioning effect when loads collide. Usages include, for example, transportation of stones in the brick industry or concrete pipes in the concrete industry. The forkshank can be fastened with a steel belt to the back of the fork and can be easily exchanged.
Request for a quote