TELEDYNE ICM

To start an exposure using the CP120B or CP160B generators, a 30 meter external trigger can be used (other lengths are available upon request). This trigger cable is connected to the 6 pin external connector of the CP120B or CP160B generator and has a two-position toggle switch that is built into an aluminum handle on the other side.

The Pipe Slider XL allows technicians to firmly fix one the of CPSERIES generators to a wide variety of pipes for all sort of NDT applications.

This Personal Electronic Dosimeter device can be configured to use either two or four-dose alarm levels. It can also be charged with a direct micro USB connection, providing greater flexibility. Benefits of the PED-Blue include: Robust and easy to use Direct micro USB connection for greater flexibility Large, clear, easy-to-read display Light weight – suited to more applications IP67 rated Simple one-button operation

The Safety Interlock systems (SIK) allows the connection of multiple safety systems simultaneously to the CP120B/ CP160B generators. The SIK and CP Battery generator are both powered by one and the same CP Battery pack, allowing outdoor field usage, but can also be connected to the mains power supply (optional) if required. The Safety Interlock Kit includes: 1x Safety Interlock Box 1x Flashing light 1x Door lock connector (incl. connector) 1x 20m connection cable on a reel to link the CP Battery generator 1x Trigger to operate the generator 1x CPB battery pack 1x CPB battery charger

The flashing light and audible flashing light on the CPSERIES are both compatible with bellow camera tripods

The CPSERIES audible flashing light is a 3 colors (red, green and orange) warning light that is combined with an audible siren, which is compacted into a reinforced housing attached by a 20 meter long connection cable. Various settings are available and these can be controlled via the POWERBOX. This accessory includes a 1/4-20UNC thread for mounting the light onto a magnetic foot or tripod.

The flashing light on the CPSERIES is a single red warning light in a reinforced housing that is attached by a 20 meter long connection cable. Two settings are available and controlled by the POWERBOX. The flashing light includes a 1/4-20UNC thread that enables the light to be mounted on a magnetic foot or a tripod.

CPSERIES X-Ray generators are equipped with a build-in carrousel spanning five positions. Upon request, any one of these positions can be provided with a specific customized diaphragm that will perfectly fit in with your application.

This reinforced version of the CPSERIES interconnection cable has been developed for extreme condition usage. The new rugged connector boot has a shock-absorbing feature and reduces the stress on the inner wires in case of accidental cable pulling. The 20cm industrial spring added at the end of the cable will limit its bending and prevent cable tears while maintaining its flexibility. The reinforced cable can be purchased individually or as an upgrade of your existing cable.

A tripod that is equipped with a specific CPSERIES holder is available. This accessory will enable an easier positioning of the generator in the field.