TESLA ENGINEERING LTD - GRADIENT DIVISION

With its carefully calibrated auto-collimation, determining height differences has never been easier. The AT-B4A features fast and accurate automatic compensation, and has an extremely short minimum focus distance of 20 cm, ensuring reliable results in any weather conditions. Fine adjustments can be made through an endless drive, and horizontal angles can be directly read in either 1 gon or degree steps. Additionally, the device offers precise work through endless fine adjustment of the side, and has a protection class of IPX6.

The Magnet Lizard is unbeatable when it comes to the effective cleaning, decoating or paint stripping of large areas, e.g. ship hulls, tanks and larger steel structures. It adheres magnetically to any magnetic surface – horizontal, inclined, vertical or overhead. Remotely controlled and selfpropelled, the Lizard makes scaffolding unnecessary and so reduces the costs to a minimum. With working pressures of up to 3000 bar and a working width of up to 400 mm, the Lizard ensures precise working and high area efficiency. The Magnet Lizard is especially suitable as an accessory for WOMA devices in the Advanced and Expert series.

Arrow Lux is a tightening seal made of polypropylene. It features a tightener with a catch and a tail part; there is a locking mechanism with a protective cap between them. The catch of the seal is designed for convenient fastening, as well as displaying identifying information: unique number, logo, and other details. The operating length of the seal is 385 mm (15.16") Another degree of protection of Clixar seals is laser marking with a unique eight-digit number on the catch and cap. It is applied through the thickness of the surface of the seal, thus, it is impossible to erase the marking completely and apply a new number or replace the seal. We also provide the opportunity to apply your company logo, QR and bar codes, and other information on the seal catch.

The twist seal Turbion is a seal made of polycarbonate. It has two pre-installed parts: a case and a rotor. The transparent (sometimes semi-transparent) case reliably protects the internal locking mechanism and helps to monitor its integrity. The internal rotor consists of 4 leaves that allow to rotate it only clockwise. This means that it is impossible to open or remove the seal without destroying the rotor, which warns the intruders of unavoidable and obvious signs of external interference. As an added security, the case catch and rotor are marked with the same unique number. This eliminates the possibility to replace the seal or some of its parts with another. Also, your logo, QR and bar codes, and other information can be laser marked on the case catch. All markings are lasered through the thickness of the surface making it impossible to erase them and apply another marking without visible damage.