THE FUME CUPBOARD COMPANY LTD

Fire Suppression in Fume Cupboards. Add Layer of Protection Fume Cupboards control the risk of fume inhalation, those same contaminants that a Fume Cupboard is protecting the operator, environment, and equipment from, can also contribute to the risk of a fire. Fume Extractions Systems should ideally protect both. Fire suppression systems, can be retrofitted as an option for all types of Fume extraction systems This unit is not recommended for preparation rooms where the Fume Cupboards are used for long periods of time as this will degrade the carbon filter faster than expected.

Ductwork Design & Installation - Onsite Ductwork Fabrication A Fume Cupboard Extraction System. should be designed, installed to run efficiently, safely and with the minimum of noise levels. To achieve these requirements all our extract and duct work systems are designed, installed, and commissioned to meet the requirements of H.V.A.C. DW154 (Plastic duct work specification), and B.S. E.N. 14175. Extract systems to serve educational style fume cupboards will meet standards set out in Building Bulletin 88 or B.S. E.N. 14175. At the fume cupboard company, we try and hot air weld as much of the ductwork as possible this prevents leakage and sustains the integrity of the joints for the duration of its life. We provide a variety of different duct materials these consist of: Chemically resistant P.V.C | Polypropylene | Galvanized Metal. For extra protection we can also make glass reinforced plastic (GRP) and fire retardant coating for this duct work.

Educational & Commercial - Fume Extraction Systems Our COSHH Test engineers are fully qualified to BOHS P601 (Commissioning and Thorough Examination of LEV Systems). We ensure all surveys are carried out in accordance with the COSHH regulations 7 & 9, following Health & Safety guidance (HSG258). The Local Exhaust Ventilation test is designed to determine the efficiency and integrity of an extraction system. It requires the engineer to gain quantitative measurements by using airflow instruments and qualitative assessments with smoke tests and a dust lamp. Engineers analyse these results and use invaluable expertise to identify design flaws, defects and maintenance issues that might affect the performance of an LEV system following completion of LEV Testing. Upon completion of an onsite COSHH Safety test a detailed report is produced that contains the findings of the survey and any comments and recommendations that are relevant, including remedial work required.

The Airflow 8 Cupboard is best suited for Industrial and Commercial situations. These Ducted Fume Cupboards are available in standard widths of 1200mm, 1500mm, 1800mm and 2000mm. Compliant with: Building Bulletin 88 (Rev G9.) Designed and manufactured in accordance with Energy Efficient Design and Operation of Fume Cupboards Guide 320. Meets BREAMM Hea 17 and Ene 11 compliance. Please note a suitable extraction system will be required for the fume cupboard to operate correctly, the extract system should be designed and installed to meet the requirements of D.W. 154 and Building Bulletin 88. The Fume Cupboard Company can offer a full turnkey solution The Airflow 8 Fume Cupboard range include :- Standard Bench Mount Walk-in Double Fronted Double Fronted Walk-in Slim Profile Sides

Ductless Industrial Fume Hoods Purair RX Ductless Balance Enclosures. is a Class I enclosure that meets USP 795 requirements for non-sterile compounding procedures. The Purair RX is designed to protect the user and the environment from hazardous powders and particulates generated on the work surface. That the heart of the Purair product line is innovative ductless technology that creates a safe work environment in a wide variety of applications utilizing balance enclosures, compounding, powder mixing, and powder weighing.

Airflow® Horizontal Laminar Flow Hoods. are a series of high efficiency products designed to protect equipment and other contents of the work zone from particulates, for applications sensitive to such contamination. The series includes Vertical Laminar Flow Fume hood (VLF) and Horizontal Laminar Flow Fume hood (HLF) and is ideally suited for use with non-hazardous contaminants and when flexible access to the equipment in the work zone is desired. At the heart of the Airflow® Laminar Flow Hood product line is the Air Science Multiplex™ ULPA Filtration Technology that creates a clean work environment over a wide range of applications. This unit is not recommended for preparation rooms where the fume cupboards are used for long periods of time as this will degrade the carbon filter faster than expected.

Movex™ Extraction arms The Fume Cupboard Company are authorised Movex™ extraction arm installer supplying, installing, and maintaining Movex™ bench and ceiling mounted fume extraction arm systems. Independently sourcing a diverse product range covering all working environments where hazardous dust and fumes form part of the working process. Local extraction is established in direct connection to the working process. This is done to remove the hazardous vapors and substances as closely to the source as possible before they are spread into the room.

Airflow® Vertical Laminar Flow Hoods. are a series of high efficiency products designed to protect equipment and other contents of the work zone from particulates, for applications sensitive to such contamination. The series includes Vertical Laminar Flow Fume hood (VLF) and Horizontal Laminar Flow Fume hood (HLF) and is ideally suited for use with non-hazardous contaminants and when flexible access to the equipment in the work zone is desired. At the heart of the Airflow® Laminar Flow Hood product line is the Air Science Multiplex™ ULPA Filtration Technology that creates a clean work environment over a wide range of applications. This unit is not recommended for preparation rooms where the fume cupboards are used for long periods of time as this will degrade the carbon filter faster than expected.

Fabricated Fume Extraction Hoods This type of Hood or Canopy are usually constructed using Polypropylene and placed directly located over the workspace. Canopies such as these would be utilized in conjunction with one of our Ductwork Systems to vent the fumes either directly to atmosphere or depending on the process via a Filtration Unit or Duct Extract Systems into the atmosphere outside.

Fire Suppression in Fume Cupboards. Add Layer of Protection Fume Cupboards control the risk of fume inhalation, those same contaminants that a Fume Cupboard is protecting the operator, environment, and equipment from, can also contribute to the risk of a fire. Fume Extractions Systems should ideally protect both. Fire suppression systems, can be retrofitted as an option for all types of Fume extraction systems This unit is not recommended for preparation rooms where the Fume Cupboards are used for long periods of time as this will degrade the carbon filter faster than expected.