Russia
Manufacturer/ Producer
Russia
Abrasive Media Copper Slag 0,2-1,6 mm for Blasting of Metal Surfaces before the painting.
Request for a quoteRussia
Abrasive Media Copper Slag 0,5-3,0 mm for Blasting of Metal Surfaces before the painting.
Request for a quoteRussia
Abrasive Media Nickel Slag 0,5-1,5 mm for Blasting of Metal Surfaces before the painting.
Request for a quoteRussia
Abrasive Media Nickel Slag 0,8-3,0 mm for Blasting of Metal Surfaces before the painting.
Request for a quoteUralGRIT LLC manufactures mechanical abrasives – copper slag, nickel slag, powder for water jet cutting, and restoration powder under own trademark Uralgrit. Uralgrit’s materials are used for corrosion protection of any surfaces and performance of blast cleaning. All-purpose slags of Uralgrit are professional abrasives: -as opposed to silica sand, use of granulated slag is safe for sand blaster operators; -have wide range of particles consisting of 11 particles; -have minimum level of dust (weight content of particles with a weight less than 0.2 mm does not exceed 5 %); -have constant chemical composition. Below are the advantages of collaboration: -Possibility of copper slag and nickel slag manufacture with any particle size within 0.1–3.0 mm. -The manufacture is certified in accordance with standards ISO 11126-3, ISO 11126-5. -High performance and efficiency of abrasives for Uralgrit metal are confirmed by more than 30-years experience of use in the field of ship building, ship repair, bridge building, steel structure handling, oil and gas industry. -The company’s specialists will give advises related to anti-corrosion and select particles to ensure the required profiling. 3 production sites of Uralgrit are located in Russia. Uralgrit is the member of the Federation of European Producers of Abrasives (FEPA).
Germany
We offer sanding belts suitable for the following manufacturers of long belt, edge and profile sanding machines: CMC, Fein, Flott, Greif, Hessemann, Hess, Holzmann, Holzkraft, Johannsen, Kündig, Kuhlmeyer, Löser, Löwer, Niederberger, Quick Wood, Scheppach, SCM, Stähle, Vohbag and Wegoma. We also offer quality sanding belts suitable for the following manufacturers of hand sanders: AEG Powertools, Atlas Copco, Black & Decker, Bosch, DeWalt, Einhell, Festool, Fein, Felisatti, Flex, Hitachi, HOLZ HER, Kress, Löser, Makita, Metabo, Milwaukee, Peugeot, Ryobi, SKIL, Stayer and Suhner. And if you can't find what you're looking for in our standard range of abresive belts, we can also supply custom-made sanding / grinding belts.
Request for a quoteFrance
Diffusers designed for aeration of activated sludge basins and tanks in Municipal and Industrial wastewater treatment plants. Quick and easy to assemble by Rotating Diffusers clockwise into Screwed connection. Designed to give optimum performance. DIFFUSER BODY The manufacture of this component in Glass Reinforced Polypropylene gives it excellent resistance to abrasion, most chemicals with significant mechanical strength. EPDM MEMBRANE The EPDM Membrane prevents the penetration of water into the distribution pipework when the air is stopped. CLAMPING TYPE AQUADISC® 250-305: Clamps are manufactured in stainless steel or polypropylene and secures the membrane to the diuser body; AQUADISC® 320: Clamp made of glass fibre reinforced polypropylene. THREAD 3/4’’ CONICAL GAS TYPE FITTING Allows Aquadisc® difusers are mounted by simple turning clockwise
Request for a quoteTunisia
CTRA studies and proposes technical solutions for the transfer of all fluids over long distances, combining chemical compatibility with mechanical and abrasive resistance to ensure a long service life without routine maintenance. The reference project carried out by CTRA in 2006 on behalf of OCP Morocco, which involved the construction of two Ø1800 phosphogypsum discharge lines with a total length of 8km, is a perfect illustration of this. These pipes combine chemical, abrasive and mechanical resistance, and were buried at a depth of more than 12m to ensure a gravity flow rate for a charged fluid. This project required the processing of 3400 tonnes of GRP vinylester over 24 months and was the subject of a case history.
Request for a quoteChina
ARKPEEK-MOD: 10% Carbon Fiber + 10% PTFE +10% Graphite High performance engineering plastic with product characteristics including excellent sliding and abrasion & wear resistance, high mechanical strength and high dimensional stability. The long term service temperature range of PEEK Rod is from -30°C to 250°C and has a short term maximum service temperature of 310°C. This compression moulded material is a PEEK polymer modified with 10% each of carbon fibre, graphite and PTFE for improved sliding and wear properties. Product characteristics including excellent sliding and abrasion resistance, high mechanical strength and high dimensional stability.
Request for a quoteCreate one request and get multiple quotes form verified suppliers.