Results for

Thermal cutting - China

13 Companies

23 Products

CIDLY

China

Double Cages Structural Heat Dissipation DesignBetter Cooling Performance Chill airflow was sucked from the upper cage and then vented through the lower level air outlet in a very high speed because of the fan's enormous pressure. The high speed chill airflow takes the heat away from the heat sink very efficiently and will never return to the upper cage again after cooling the heat sink because of the obstruction of the baffle which is in the middle of the fixture. As such, the thermal cycle was cut off and better cooling performance acquires. Better protection & Lower Noise Not like the previous fan's installation, new double cages structure covers the vulnerable fans inside to protect them from external disturbance.This structure also substantially reducing the fan's noise while increasing the whole light's waterproofing capability and dust preventing capability due to its enclosed construction.
SAFTTY ELECTRONIC TECHNOLOGY CO.,LIMITED

China

Good day.We are a leading thermal protector, thermal cut-out, PTC thermistor, thermal switch sensor, thermostat manufacturer with nearly 20 years R&D experience in China.Saftty is now hot selling and promoting for the below types of thermal protectors: A. ST01 series thermal protectors which are similar as S01 of THERMIK and F11 series of MICROTHERM. B. BW-D series thermal protectors which are similar as YS11 of SENSATA, ST-22 of SEKI and JP6/JP7 of UCHIYA. Our products are certificated quality but 30% to 40% lower price than similar products in USA and Europe. But unlike our China-made competitors, our key components are directly imported from USA and Japan. Furthermore we carry out most strict manufacturing engineering and inspection procedures to make sure we produce the top quality products. More details please visit at www.saftty.com and go back to us. Free samples are available upon request. We appreciate your further reply.
XIAMEN GOOT ADVANCED MATERIAL CO.,LTD

China

We Xiamen goot is ISO 9001: 2008 certified company, having 3 continous production lines to produce phenolic foam, PU & PIR pre-insulate duct panel and insulation board for wall/floor/ceiling insulation, different faces such as craft paper, alu foil, fibre glass, steel sheet and galvanized iron can be covered on both sides or one side. Besides, we also can make insulated pipe section, pipe support, pipe reducer, elbow and "T" shape pipe, which are new types of thermal insulation material, cut from rigid closed cell phenolic foam block in standard densities from 40kgs/m3 to 160kgs/m3. Our phenolic foam insulated products are Class O fire rate according UK building regulation and are CFC/HCFC free.
HONGTECH THERMAL PRODUCTS LIMITED

China

Hongtech has full series equipments in manufacturing heat sink from cutting and cross cutting, CNC precision machining center, stamping, grinding, polish, sandblasting and automative assembly packing lines, the main products include industrial Control heat sinks, stamping metal parts, bracket and high quality panels, which are widely used in industry, power system, medical, Telcom devices, computer equipments and LED system. We forcus on exporting market, Our mission is to become the advanced manufacture in thermal system, Our goal is to offer customers the highest quality cooling technologies with very competitive price and to become the advanced manufacture in thermal field,
SHANGHAI TAYOR HEAVY INDUSTRY(GROUP) CO., LTD

China

Tayor is one of the top manufacturer of CNC cutting machines in China, we produce plasma cutting machine, flame cutting machine, water cutting machine, Laser cutting machine, profile cuttin machine.We have established good relationship with Hypertherm, Thermal Dynamics, Kjellberg, ESAB, Hiwin, Panasonic. various top quality resources are integrated on our machine to promise reliable quality for our clients all over the world.We offer instant aftersale service for you, engineers from our partner and our own company are ready for any requirement from you. Tayor prefer to grow together with clients all over the world.Beside cutting machine, we also produce welding machines and welding rodsPlease visit our website http: //www.tayor.com.cn for more details, you can also contact Bruce Wu from Tayor and kindly let me know your need, we will reply within 24 hours, please write email to me by tayorcutting01@gmail.com.

A page for your business

Can you see this? Your potential clients will too. Join us now so you too can be visible on europages

Add my business

FUJIAN HUAQING ELECTRONIC MATERIAL TECH. CO., LTD.

China

The AlN ceramic substrate has high thermal conductivity of more than 170W/m.k, high density, low dielectric loss, good insulation and some other excellent properties.The AlN plate is the best choice for a wide range of industrial insulating heat sink material of high power machinery and equipments such as high frequency equipment substrate, high power transistor module substrate, high density hybrid circuits, microwave power devices, power semiconductor devices, power electronic devices, optoelectronic components, laser-semi-conductor, LED, IC products, and so on.Surface roughness can be reached within 0.1µm after being polished. Size tolerance can be controlled at around ±0.1mm by laser machine.Different dimension products are available via laser cutting or customize.
SUZHOU DASEN ELECTRONICS MATERIAL CO.,LTD

China

Graphite film cooling, a new thermal conductivity and heat dissipation materials, has a unique grain orientation, uniform heat conduction along the two directions, the lamellar structure can be well adapted to any surface, shielding the heat source and the components while improving consumer the performance of electronic products. Uniform cooling products, but also in thickness to provide thermal isolation.Graphite thermal film features: Excellent thermal Conductivity (500W/mk to 1500W/mk)2..: surface with metal, plastic, stickers and other material combinations to meet the design features and needs.3..Low thermal resistance: 40% lower than aluminum, which is 20% lower than copper4..Light weight: 25% lighter than aluminum and 75% lighter than copper5..Easy to cut : graphite heat sink can be smoothly attached to any flat and curved surfaces, and in accordance with customer demand for any form of cutting.Application The graphite heat dissipation film widely used in PDP, LCD TV, Notebook
ZHEJIANG DONGXIN SEALS CO.,LTD

China

Dongxin Seals specializing in developing and producing silicon-carbide and Graphite product: Silicon Carbide (SiC) is an industrial ceramic possessing characteristic high hardness, good wearablity, low friction coefficient, fine oxidation resistant, good thermal stability, low thermal expansion coefficient and good chemical resistance. This makes it ideal for use in working conditions of high wear, corrosive medium, high temperature and high pressure etc. SiC is an important engineering material and has been used in applications of machinery, metallurgy, chemical industry, mining and electronics, as sealing ring of mechanical seals, gliding bearing, nozzle, cutting tool etc. Reaction-bonded silicon carbide (RBSiC) Sintered Silicon Carbide (SSiC) Sinter Silicon Carbide with Graphite (SSiC+C) Porous SSiC Porous SSiC+C.
YANCHENG BAOJUN -XINGTAI INDUSTRIAL GROUP

China

Xingtai Industrial Group is a globally renowned designer and manufacturer of electric process heating and control systems.The Subsidiary Corporation Yancheng BaoJun manufactures a complete line of Thermal oil heater, Duct heater, In dustrial oven, flange heaters, circulation heaters, tubular heaters, and immersion heating elements for a wide variety of industrial and commercial applications since 2001. Our electric heating products are available with digital or mechanical controls and/or thermocouples to help provide customers with accurate temperature readings. Our heating products are also available with industrial grade safety features such as high limit cut off controls to help preserve valuable heating equipment from over heating.
HEBEI HUIJINFENG FIBRE PRODUCTS CO.,LTD.

China

1. non-woven polyester mat, used for modified bitumen membrane, as inner layer or reinforcement layer. We have both staple fiber polyester mat, and spunbondfilament fiber) polyester mat for your chosen. The products have feature of high tensile strength, low moisture content, and good saturating property in the hot oil tar.2. The fiberglass mesh, has feature of 1)Alkali-resistant, acid-resistant, waterproof, cement erosion-resistant, etc; 2)Good dimensional stability, stiffness, smoothness an difficult to shrink and deformation, good positioning property; 3)Good impact resistance; 4)Fire resistant, thermal insulation, sound insulation, etc. The mesh is usually used with other construction materials, like plaster, cement, sand, etc, to prevent the walls from cracks, and maintain the completeness if there are more damage impacts. It's fire proof, usually more than 400 centigrades; 3. The self-adhesive fiberglass tape, that been cut from the mesh, used for wall fixing or repairing.

DANFORE LIGHTING

China

Danfore Lighting Co., Ltd. was founded in 2007, is a Professional LED lights manufacturer in China, certified with ISO9001: 2000 management system. Advanced and professional equipments are utilized to aid LED assemblies of LED strips, array and various luminaire. Now we supply large variety of LED products from indoor to outdoor lightings from LED tube, LED bulb light, LED spotlights, LED Flood light, LED track light to LED wall washer and etc. The well trained production and QC staff can assure all the lights perfect performance. Danfore Lighting Co., Ltd has become the biggest supplier of LED Bulb lights as well as trustful partner of LED companies.Danfore endeavors to develop new products with the cutting-edge LED technology. Our expert R&D team have abundant knowledge of electric components, thermal management, optics as well as industrial design. All products are CE&RoHS approved. The prototype of custom design can be submitted to customers in a shortest time as only 3 daysWe have o
QINGDAO DINBOND GLOBAL SUPPLY CHAIN CO.,LTD

China

We're one professional supplier for railway train , marrine and aircraft in China. And we are exporting parts and materials for interior decoration for these fields. our melamine foam(the same as BASF's BASOTECT material) , this is a flexible, open cell foam made from melamine resin, a thermoset polymer. its high sound-absorption capacity, flame-retardant characteristics, high-temperature resistance, low weight and thermal insulation. it is used in a variety of applications and industries (i.e. construction & industry, automotive, transportation and consumer i.e. cleaning) due to its excellent properties. it can be installed quickly and simply since it is lightweight and free of mineral fibers.We can offer the max thickness is 240MM.and the color is white, gray, light gray. And also make them covered Alumimum foil, etc and cut. according to the request of customers.We also offer the bathroom euipment for handicapped and elderly such as walk in bath tub, walk in shower canbinet, shower chair

Product recommendations

Germany

United Kingdom

Automatic strapping machine for boxes TP 101

Italy

Ukraine

See more products

SHENZHEN SHESUN LIGHTING CO.,LTD.

China

Shesun Company Limited was founded in 2006, TUV ISO9001: 2008 registered company. It has 400 employees currently and fabrication area 25, 000 square meters. Advanced and professional equipments are utilized to aid LED assemblies of LED strips, array and various luminaire. The equipments include SMT assembly, auto soldering lines, opto-electrical test devices, light and optical distribution analysis devices. The well trained production and QC staff can assure all the lights perfect performance. All the products are CE certified and RoHs compliant. Shesun company limitedhas become the biggest supplier of LED strips and a most trustable supplier of LED luminaire.Shesun endeavor to develop new products with the cutting-edge LED technology. Our expert R&D team have abundant knowledge of electric components, thermal management, optics as well as industrial design. We bring out more than 2 brand new luminaires and 10 custom design LED strips/arrays every month. All designs strictly follow the UL

Find quotes for

Filters

Results for

Thermal cutting - China

Number of results

13 Companies