Results for

Gas measuring technology - Import export

57 Companies

9 Products

HÖNTZSCH GMBH

Germany

Flow measurement technology has been the core of our business since our company was founded in 1966. From 1976 onwards, Höntzsch has worked to develop, manufacture and distribute innovative and groundbreaking products in the flow measurement sector, and has been part of the DMT GmbH & Co. KG group in Essen as of 2012. Höntzsch also offers solutions for special areas of application such as explosive zones in accordance with ATEX, for gases with operating temperatures up to 550 °C, for measurements under regulatory control in accordance with the "TA Luft" air pollution control regulation and sections 13 and 17 of the "BImSchV" (the German Federal Imission Protection Ordinance), for high flow speeds of up to 200 m/s or for flows with changing directions of flow. Our DAkkS-accredited calibration laboratory completes our range. Air flow meters, calibration service for electrical measuring and testing equipment, development of flow meters, intrinsically safe sensors for explosion protection areas, compressed air measurement, intrinsically safe equipment for explosion protection areas and compressed air flow meters

Website
COMPUR MONITORS GMBH & CO. KG

Germany

Compur Monitors manufactures high-quality gas measurement technology. Our very own sensor technology makes gas warning devices from Compur Monitors unique. The strength of Compur Monitors is based on our own sensor expertise. We develop and manufacture sensors for toxic gases in-house. For this reason, Compur Monitors is especially successful in the market sector for gases which present particular challenges in terms of measuring technology. Compur Monitors has a particularly strong presence in the chemical and petrochemical industry. Products from Compur Monitors are specifically developed for this market. Our products include: Chemical-based gas detectors; Gas warning devices (stationary and mobile); Oxygen meters; Gas measurement equipment; Oxygen trace measurement devices; Gas sensors; Gas warning systems; Gas measuring technology

See all products
ANDJANA INSTRUMENTS UG

Germany

Andjana Instruments offers safe compressed-air quality – air quality monitoring – behind compressors – filters – activated carbon – measuring residual oil content and more: Comprehensive modular compressed air and gas measuring technologies for oil content, volumetric flow, humidity, pressure dew point, particle measurement, pressure, temperature, gases, emissions with optional data acquisition and remote diagnosis according to HACCP – GMP and FDA requirements, ISO 8573, EN 12021 breathing air; validated data records according to FDA 21 Part 11 with audit trail. Metrological safety for industry and hospitals – breathing air systems – laboratories, cleanrooms. Medical hospital breathing air systems according to ISO 7396 – European Pharmacopoeia; risk monitoring for medical compressed air – in-house production in accordance with the Medicinal Products Act; quality control for medical gases – oxygen – nitrogen – compressed air of own production. Standard and CE conformity assessments for medical gas supply systems; job measurements, calibration service, service
VEMM TEC MESSTECHNIK GMBH

Germany

Our measuring technology is used around the world. Our company has developed into an internationally recognised producer of gas measuring technology and flow measuring technology. Proven intelligent technology and innovative new and ongoing developments guarantee product safety to our customers. Quality, fair prices, punctual delivery and a reliable service are key to our customer-focussed company philosophy.
SCHÜTZ GMBH MESSTECHNIK

Germany

Schütz Messtechnik is an experienced and qualified company that has been operating as a service provider and an equipment manufacturer for energy companies since 1968. In the amenities industry, Schütz checks the public gas pipeline networks in accordance with the regulations G 465, G 466/I and G 466/II of the German association for gas and water (DVGW), carries out leak and pipeline detection and exchanges meters. In addition, it holds technical seminars and training sessions for employees from utility companies. Schütz GmbH has been certified by the DVGW as a company specialising in checking gas pipelines. Energy companies using a geographic information system (GIS) can check their pipeline network with Schütz's digital technology. Among Schütz GmbH's client base today are more than 100 municipal utility companies, with whom the company maintains long-standing, close and trusting business relations.

All the products for "gas measuring technology"

Test Station PS 103

Test Station PS 203

Test Station PS 403

Test Station PS 403-U

GM 5

Website See all products

A page for your business

Can you see this? Your potential clients will too. Join us now so you too can be visible on europages

Add my business

VÖGTLIN INSTRUMENTS GMBH

Switzerland

Vögtlin is a Swiss company which develops precision flow rate devices. Our experts in flow rates have been developing high-quality products and solutions for your flow rate metering and controlling tasks for 30 years. Our thermal mass flow rate meters and mass flow rate controllers for gases, with digital and analogue output and IP67/NEMA6 and ATEX protection, are ideal for wide range or applications. This includes the areas of gas analysis, laboratory equipment, pharmaceuticals, biotechnologies, life sciences, research and development, testing equipment, OEM and many industrial applications and all-round solutions. Our high-precision flow rate meter and controller devices are built using MEMS semiconductors technology. With more than 300, 000 units sold, we are an internationally respected player in the market. Our OEM partners and customers require reliable quality and reproducible performance. As a company with ISO 9001: 2015 certification, we can guarantee compliance with the highest quality standards.

Website
BOURDON HAENNI GMBH

Germany

Bourdon is now one of the world's leading brands for mechanical process instrumentation and, with its international sites, is part of the Baumer Group. It was created in 2005 through the acquisition of the service portfolios and expertise of the formerly well-known brands Bourdon-Sedeme and Haenni. This expertise and passion is based on the Bourdon-tube gauge invented by Eugène Bourdon, which is a key component for precise mechanical pressure measurement technology. The extensive product range is manufactured with high vertical integration and state-of-the-art process methods at the company's own production sites in France, Germany and India. In addition to the standard products, such as thermometers, pressure gauges, pressure and temperature switches, this also includes a variety of customer-specific solutions which are mainly used in the sectors of oil and gas, energy/power stations, water supply, chemicals, and heating, ventilation and cooling.

Website See all products
CHEMEC GMBH

Germany

WE ARE YOUR EXPERIENCED PARTNER FOR GAS ANALYSIS. CHEMEC was founded in 2000 as an engineering firm for chemical measurement technology. We have many years of experience in using gas sensors in biogas analysis, especially in the field of thermal conductivity sensors and electrochemical gas sensors. OUR TECHNOLOGY OFFERS THE HIGHEST RELIABILITY. WE ENSURE YOUR SUCCESS WITH OUR CONSULTATION AND SERVICE. No matter whether it concerns fermentation processes in agricultural biogas plants or in industrial or local sewage treatment plants, exact and highly reliable gas analysis is crucial for the optimal functioning of plants. We have been developing and manufacturing gas analysis equipment based on our own technologies for around 20 years.

Website
B + B THERMO-TECHNIK GMBH

Germany

Since 1984, B+B Thermo-Technik gas been developing and producing innovative product and industry solutions with the highest quality standards for precise measuring jobs. Benefit from our many years of experience and expertise. We are based in the town of Donaueschingen in the south-west of Germany. From here, our quality products are distributed all around the world. The latest technologies in research, development and manufacturing and our certifications in accordance with DIN EN ISO 9001: 2015 and DIN EN 61340-5-1 mean that we produce our products to the highest quality standards. We also provide our customers with test certificates and DAkks (the German national accreditation body). calibration certificates. Quality and proximity to customers are integral parts of our strategy. This is why we predominantly manufacture in Germany and at fully owned subsidiaries all over the world. We guarantee continual quality controls, flexible responses to customer requests and modifications, as well as timely deliveries.

Website See all products
INFICON GMBH

Germany

INFICON is a leading provider of innovative measuring equipment, sensor technologies for critical processes and advanced process control software that enhance productivity and quality in sophisticated industrial vacuum processes in highly specialised sectors. These products are essential for gas leak detection in air conditioning/refrigeration technology and automotive manufacturing. They are also vital to original equipment manufacturers (OEMs) and end-users in the complex fabrication of semiconductor chips and thin film coatings (e.g. for flat panel displays, solar cells, magnetic and optical storage media, visual and decorative coatings and architectural glass). Other application areas for our vacuum technologies include the life sciences, research, aerospace engineering, food packaging, heat treatment, sterilisation and laser cutting. INFICON also uses its expertise to provide unique products for the analysis of toxic chemicals.

Website See all products

DEHAS MEDICAL SYSTEMS GMBH

Germany

DEHAS – 2002 to 2019, over 15 years of expertise and made in Germany solutions. Our products are used in the sectors of emergency medicine, hospitals, home care and aviation. We focus on the medical use of oxygen, dosing, mixing, measuring and displaying the resultant vital parameters. The key products are our QualityReg pressure reducers, QualityMix gas mixers, QualityMon O2 monitoring and EasyMate liquid oxygen devices. Our portfolio includes service, consultation and special construction of series or individual parts for customer-specific requirements. ISO 13485: 2016 certification and BeP (in-house test service) for pressure container construction are a matter of course; the production location is Germany. We are an original equipment manufacturer (OEM)/private label manufacturer for renowned manufacturers/companies in the medical technology and aviation industries. DEHAS – WE THINK IN PRESSURE AND FLOW!

Website
WETEC GMBH

Germany

Founded in 1999, we are specialists in die and mould manufacturing and produce prototypes, small series and large series of plastic products for a wide range of applications. We design and manufacture the tools required for use at our site (as a system supplier in series production) or for use at the customer's premises. Moreover, we are happy to produce customised tools. Thanks to our cross-industry production facilities, we are partners for customers from the automotive, electronics, tool manufacturing, mechanical engineering and plant engineering sectors, as well as for measuring technology companies and many others besides. We develop tailor-made solutions designed to be sustainable and future-proof – whether we are manufacturing individual components, supplying ready-made products or acting as a full service partner. Our profile: - Injection-moulding machines with a clamping force of 25–320 t - Manufacturing of injection-moulded parts of 1–1200 g in weight - Injection moulding of insert parts - Manufacturing with the gas injection method. We process all thermoplastic materials and elastomers. Our specialities: PA6T/6I GF 50 FWA with drinking water approval. Conductivity. Materials with anti-slip or flame-retardant properties. In order to manufacture tailor-made and high-quality plastic products, you need to have the right hardware. We have fully equipped die and mould manufacturing facilities where we produce high-quality injection moulding tools. We also use Cimatron E CAD/CAM software to assist us with designing and adapting items for the injection-moulding process

Website

AIS HENSCH AUTOMATION-INDUSTRY- SOLUTIONS INH. IGOR HENSCH

Germany

Welcome to AIS Hensch Automation-Industry-Solution, your reliable procurement partner for high-quality industrial products and solutions. Based in Isernhagen, we operate internationally to fulfil the needs of our customers in various industrial sectors. Our focus is on MRO equipment and industrial products for plant construction and maintenance. Quality, reliability and efficiency are the cornerstones of our services. Thanks to our global network, we procure spare parts and components at top prices, including the manufacturer's warranty and optional extended warranty. Our expertise also spans the oil and gas, water/wastewater, refineries, automotive, mining services, shipbuilding and wind power industries. We not only offer procurement, but also complete solutions for plant automation. Our purchasing experts support you in choosing and implementing the best technology. Our portfolio includes industrial CPUs, motors, pumps, hydraulics, measurement technology and heavy-duty contactors, as well as pumps for the highest-quality pure water. We work independently of the manufacturers, so we can offer you the best solutions at the best price. We provide support through procurement, project planning and market research for new developments. Our goal is establish long-term working partnerships with our customers, helping them meet their objectives, ensuring their production is free from problems. Contact us to discover pioneering projects and customised solutions.

All the products for "gas measuring technology"

Industrial measurement technology

Website See all products
TECMA SRL

Italy

Tecma srl is a leading company in heat and thermochemical treatments: gas nitriding, Tenifer® ferritic nitrocarburizing, carbonitriding, carbocementation, bainitic hardening, martempering, hardening and return to the atmosphere, salt and vacuum baths, solubilisation followed by ageing. One of the leading technologies is the 4.5 m vertical gas nitriding installation (5000 kg), equipped with potential nitrogen measurement sensor.

Website
INFICON AG

Liechtenstein, Principality of

INFICON is a leading provider of innovative measuring equipment, sensor technologies for critical processes and advanced process control software that enhance productivity and quality in sophisticated industrial vacuum processes in highly specialised sectors. These products are essential for gas leak detection in air conditioning/refrigeration technology and automotive manufacturing. They are also vital to original equipment manufacturers (OEMs) and end-users in the complex fabrication of semiconductor chips and thin film coatings (e.g. for flat panel displays, solar cells, magnetic and optical storage media, visual and decorative coatings and architectural glass). Other application areas for our vacuum technologies include the life sciences, research, aerospace engineering, food packaging, heat treatment, sterilisation and laser cutting. INFICON also uses its expertise to provide unique products for the analysis of toxic chemicals.
BOPP & REUTHER MESSTECHNIK GMBH

Germany

Whether you need to complete the wide variety of tasks in public utilities, supplying water, gas and energy, or solve process engineering problems in the chemical and petrochemical industry or answer questions about machine and equipment design or meet process engineering requirements in the food industry, our wide range of high-quality measuring equipment enables Bopp & Reuther Messtechnik GmbH to find a practical solution for every application. The requirements that need to be met in industrial process measurement technology are distinguished by the way they are becoming increasingly complex. At the same time, the trend towards individually harmonised, comprehensive concepts is getting stronger. This requires measurement device manufacturers to have a precise understanding of the objectives of the application and the operating conditions. Our products and services are based on grounded expertise in application engineering which we have gathered in collaboration with users from a wide range of sectors.

See all products
ADVANCED MAGNETIC TECHNOLOGIES AND CONSULTING (AMT&C)

Russia

AMT&C Group designs and manufactures magnetic equipment for domestic, industrial and scientific applications on the basis of permanent magnets and electromagnetic systems. The Group produces: —permanent magnet systems of highly intensive magnetic field (magnetic indicators of flaws, magnetic field sources of various shapes); —magnetic electrical and electronic measuring instruments for laboratories and re-searchers; —electromagnetic equipment. AMT&C focuses on contemporary areas of applied magnetism: energy-independent gas shut-off valves, electric actuators and electric machines with extremely high energy conversion effi-ciency, sprung in-wheel motors, scientific instrumentation and magnetic systems for control-ling endoscopic GI examination capsules. The Group designs and manufactures powerful magnetic systems for science and industry (magnetic separators, iron separators), as well as search coil magnetometers and devices for measuring magnetic quantities. AMT&C conducts R&D in magnetic hyperthermia, precision targeted magnetic field controlled desorption of drugs, magnetic refrigeration, as well as in methods of manufacturing nanoscale and nanostructured materials. AMT&C Group started its operations in magnetic equipment and technologies market in 1999 and currently benefits from over 40 years of scientific and practical experience in the field of magnetism and its applications.

See all products
NITTO KOHKI EUROPE GMBH

Germany

NITTO KOHKI Europe GmbH is a world-famous Japanese designer and manufacturer of pumps and compressors, quick-release couplings, and tools. The air compressors, vacuum pumps and liquid pumps are ideally suited for analysis, medical technology and measuring technology, for example. Our patented aeration compressors are used in small-scale sewage plants and biogas plants. The quick-release couplings for low, medium and high pressures, as well as our multi-couplings (manual & automatic) cover almost all possible applications: E.g. cleanroom technology, leak tests in refrigeration and air conditioning technology, hydraulics and pneumatics. They are suitable for oil, water, air and gas. In addition, we provide pneumatic tools for the maritime and steel processing industries, for example pneumatic needle scalers, cylindrical grinders, angle grinders, surface grinders, deburrers, orbital sanders, portable core drills, and so on.

See all products
MICRO-HYBRID ELECTRONIC GMBH

Germany

MICRO-HYBRID Electronic GmbH is a leading medium-sized company providing sophisticated customized electronics solutions. We have been developing and manufacturing innovative electronics for over 30 years. Our customers benefit from unparalleled solutions for control tasks in challenging environmental conditions. Our portfolio ranges from ceramic substrates and enclosures for miniaturized electronic modules for sensor control to infrared components and sensors for temperature measurement and gas analysis. MICRO-HYBRID is consistently reshaping the global world of electronic micro systems technology. We create high-precision components and sensors by utilizing above-average development expenses, a high level of skill and know how as well as an extensive collaborative network. As we continue with the development of technologies and materials and work on technological innovations, we create customized solutions with significant added value for our customers. Our extensive application experience in various industries allows us to utilize a unique technological range to solve your development task. This is why technology businesses worldwide choose us to assist them in solving their measurement challenge.

All the products for "gas measuring technology"

MTS2SENS200 flourane

NDIR bundle HC

See all products
HEIFEI COMATE INTELLIGENT SENSOR CO., LTD

Germany

Heifei Comate Intelligent Sensor Co., Ltd is a leading manufacturer of industrial flow meters. We have over 15 years experience of researching and developing of flow meter products. The Comate R&D team is able to anticipate and fulfill the requirements of end users by designing some of the the most reliable and durable flow meters in the marketplace today ! Examples of our most innovative and advanced technology can be seen in 2 of the products we manufacture, the Digital Vortex type flowmeters, and Thermal mass flow meters. Both of these technologies from Comate have reached the world’s first class. By using most advanced and optimized digital signal processing technology, durable and reliable structure. With over 15 years’ experience measurement in field of steam, compressed air, gas and other fluids Professional sales & tech team offered service in application analyzing, model selection, problem precaution and trouble shooting Sonic nozzle calibration system ensures that every Comate flow meter will be able to match the accuracy promised

See all products

RHEONICS GMBH

Switzerland

Rheonics is a leading provider of industrial automation solutions for density and viscosity monitoring and control. Rheonics density meters and viscometers are available as probes and flow-through systems for installation in tanks, process lines and reactors. Invented and built in Switzerland, each precision manufactured Rheonics fluid density and viscosity sensor is custom designed to match your application needs. Whether you need to measure density and viscosity downhole at 30, 000 psi and 200 °C or monitor the viscosity of polymerization reactions, we have a solution for you. All Rheonics products are designed to withstand the harshest process environments including high level of shock, vibrations, abrasives & corrosives. Rheonics’ products are already used in a broad range of markets from food processing to downhole oil & gas exploration and production by core brand customers. We add value to our customers through a combination of innovative technology, robust products and focus on ease of use. We believe the fluid sensing market for density and viscosity is on the cusp of revolution through the introduction of stable, reliable, robust, plug-and-play instruments. Rheonics solutions are backed by more than 30 years of research from ETH Zurich, one of world’s top 10 universities.

See all products
AICHI TOKEI DENKI CO., LTD.

Japan

Aichi Tokei Denki offers a wide variety of products and services which provide fluid measuring and monitoring technologies to the Gas and Water Industry and the Industrial Market which is essential for the manufacturing sector. For a period of over a century since our establishment in 1898 in Nagoya city which is one of the most thriving cities due to the manufacturing industry in Japan, we have developed and refined core technologies utilized in precision machinery and fluid measurement by clock, water and gas meters. We are now aiming to expand to become a more influential manufacturer of flow measurement equipments and systems and will continue to strive for a high standard of safety, comfort, and customer satisfaction in all our products and services delivered through our renowned and long-standing manufacturing experience. We're exhibiting in Hannover Messe 2019! During the exhibit period, please feel free to visit our stand (B65, Hall 11) at your convenience. We have globally sought partners to promote more of our products and technologies.If you are interested in our business and would like to have a meeting during Hannover Messe exhibition, please look into our website and send us a message from “Contact” tab in advance.

See all products
BARTEC

Germany

World Market Leader in Explosion Protection. BARTEC is a leading manufacturer of explosion proof equipment preventing explosions wherever hazardous substances could occur. BARTEC’s product portfolio ranges from complex measurement and analysis technology via innovative heating technology solutions to explosion-proof components and systems for automation, control and communication. BARTEC’s customers (comprising a balanced mix of OEMs, EPCs and end customers) operate in a wide range of industries including oil & gas, chemical, petrochemical, mining and pharmaceutical. BARTEC operates globally and is headquartered in Bad Mergentheim, Germany. There are working situations in which sparks should never be allowed to fly! For these situations the explosion protection specialists at the BARTEC Group develop innovative products and solutions. The reason: wherever hazardous substances such as flammable gases, vapors, mists or dusts can occur the component and system solutions developed by BARTEC prevent explosions and ensure the safety of both people and the environment.
ESI TECHNOLOGY LTD

United Kingdom

pressure transmitters and transducers; pressure sensors, silicon-on-sapphire sensor technology; instrumentation; customised pressure measurement solutions; hyperbaric testing; ESS testing; differential pressure; subsea pressure; depth and level measurement; ATEX; IECex; intrinsically safe pressure transmitters; high accuracy pressure transducers; digital USB pressure transducers; flush diaphragm pressure transmitters; high temperature to 200ºC pressure transducers; hygienic and sanitary pressure transmitters; oil, gas and subsea pressure; high precision pressure; wireless pressure transmitter; heavy duty pressure transmitter; Strain gauges and bonding
K&B KUNSTSTOFFDREHEREI GMBH

Germany

We can produce almost all of your turned parts, no matter whether you have a sample, sketch or a custom-made part. Our modern machinery allows us to produce finished complex turned parts. Our day-to-day business is as much about fitting cross holes, knurling, thread cutting and milling as it is finding construction and material solutions for your turned parts. Our plastic turned parts are used in, among other areas, the gas, fittings and electrical industries, mechanical engineering and measuring, control and medical technology. Our industrial foreman's many years of experience in the field of plastics machining mean that we have an in-depth knowledge of the quality standards and the appropriate manufacturing technologies. Almost all of plastics are processed in-house. The plastic used for the plastic turned parts can also be processed in-house with additives, such as reinforced with glass fibre or carbon
HYCO VAKUUMTECHNIK GMBH

Germany

We look back on 50 years' experience in the design and manufacture of diaphragm pumps and piston pumps for evacuating and conveying gases and vapours in applications around the world. We design, develop and produce from our main plant south of Munich, focusing on premium quality and innovation while also upholding ecological standards. Our portfolio consists of diaphragm pumps and piston pumps with linear or piston-rod drives, measuring gas pumps and laboratory pumps, as well as special pumps tailored to customer requirements. We have over 40 product lines in total, spanning a wide range of applications. hyco® pumps effortlessly meet the technical and economic requirements of vacuum generation. We are a traditional yet innovative company with the requisite experience and ever-growing expertise to meet our customers' every need. The application of current technologies and carefully considered workflows alongside optimised and efficient work processes guarantee consistently high quality.
CASCADE TECHNOLOGIES

United Kingdom

Cascade Technologies is a technologically innovative designer, developer and manufacturer of Quantum Cascade Laser-based (“QCL”) gas analysers and gas emission monitoring systems. Cascade’s proprietary systems have the capability to measure up to 20 different gases simultaneously, in real-time and can measure multiple gas components in a single system. Cascade’s systems replace other technologies, such as Non-dispersive Infrared (“NDIR”) and Chemi-Luminescence. The applications for Cascade’s technology are various such as: process optimization in the petrochemical and natural gas industries, leak detection for pharmaceutical, food and aerosol packaging, research and development in automotive engine test, continuous emissions monitoring in marine and power generation, and virtually any application that has gas by-products.
IAG -INDUSTRIE AUTOMATISIERUNGSGESELLSCHAFT M.B.H.

Austria

Specialised mechanical engineering for industry, particularly for the friction lining technology, test bench technology, artificial snow technology, emission protection and fire fighting categories. We are looking for distribution partners. Our products: Drawing-based specialised mechanical engineering, exhaust gas analysers for motor vehicles, automation technology, specialised mechanical engineering, presses for friction linings, exhaust gas measuring equipment, sprayer systems to combat dust, humidifiers for dust binding, exhaust gas analysis systems, snow cannons, etc.
EL GAZ SA

Greece

EL GAZ SA founded in 1980 and is a manufacturing a distriduting company of gas cartridges and appliances , based in Greece. Our main goal is to maximize the production of high quality products and keep up with all new equipment and technology sectors. Our efforts concentrate to develop products upon are applied quality measures and standards in the production process. The philosophy of EL GAZ during all these years of hard effort is to produce high quality products without compromise and influenced by the unstable environment of the market. We believe that this philosophy has led EL GAZ in its establishment in the broad field of international market, as a reliable manufacturer. Today, EL GAZ expanded to a new proprietary site at charaintini region in Thebes, Greece. Thus, we extend the scope of our activities across household gas products. Our Manufacturing processes are certified with ISO 9001-2008, continuing the tradition and sealing the relationship of trust that was created thirty years ago with our customers. The production processes of EL GAZ are the result of development and investment in modern production units, designed to deliver the highest standards of safety and quality.
ROGACHEV PLANT DIAPROEKTOR

Belarus

The main activities of the plant include: production of medical equipment, measuring devices, components and details for automotive industry and equipment for service centers, production of devices for airfield systems, transducers and pressure alarms for russian gas-and-oil industry and other articles. Those directions allowed us to master and phase in new articles in tough terms, which are not worse than foreign analogues according to their characteristics. Enterprise preserved technological strength and productive potential, have been developed new high-tech, which allows us to work without interruptions and increase our technical and scientific level. Design and mastering of new products became possible due to modernization of material and technical basis. Today we purchase new equipment of foreign and domestic manufacturers to pro duce articles of high quality and high-end technology.