Results for

Device testing - Germany

70 Companies

127 Products

Product recommendations

Germany

5 x Lyme Disease Blood Test, Lyme Borreliosi

Netherlands

Poland

Malta

See more products

BURSTER PRÄZISIONSMESSTECHNIK GMBH & CO KG

Germany

With passion for precision and quality the German brand burster precision measurement technology develops and manufactures since 60 years as one of the most important suppliers precision instruments, sensors and systems for sensor signal processing and process monitoring. burster applies highest quality standards in its production of components and systems in accordance with EN ISO 9001: 2015. burster supplies 7500 customers worldwide. burster’s innovative and experienced team provides intensive application support even before a decision to buy is made. Solving complex measurement problems and integrating measurement and test technology into production environments for production control, quality assurance and test-equipment monitoring are everyday's instrumentation tasks. burster supplies measuring technology ranging from individual sensors to system solutions, with emphasis on plant construction and engineering, automation, the automotive industry and its suppliers, electrical and electronic engineering and chemicals industry. It also has a presence in numerous other sectors and future markets such as electro-mobility, alternative energies, medical engineering and biotechnology. In addition to solutions employing standard products, burster provides custom OEM solutions. Many years of experience as manufacturer of measuring sensors and instruments guarantee optimum solutions. This has earned burster an international reputation for innovation geared to customers’ needs.

All the products for "device testing"

TRANS CAL 7281

RESISTOMAT® 24508 Digital megohmmeter

Calibration resistor - 1240

FORCEMASTER 9110

Website See all products
OETIKER DEUTSCHLAND GMBH

Germany

Oetiker gives its customers the peace of mind that their mission-critical components are reliably connected. We are a global leader in high-end connecting solutions for the vehicle industry and for high-value applications in various industrial segments. Our expertise in high-quality clamps, clips, rings, straps and quick connectors ranges from motor technology and power train applications to medical technology applications. With over 1900 employees in more than 25 countries and over 75 years of experience, we are the global long-term partner on which leading OEMs from all over the world rely.

Website
ATLAS MATERIAL TESTING TECHNOLOGY GMBH

Germany

For more than 100 years, Atlas has been the pioneer in continually developing new solutions in order to assist companies in testing the durability of their products. From our first instrument in 1915 (the Solar Determinator), which simulated the fading effect the sun has on fabric, through to today's comprehensive network of weathering – a range of services and products for materials testing – our focus has remained the same. We offer our customers sophisticated technologies and advanced testing solutions so that they can determine the durability of their products. As a result, our customers can reach their ultimate goals: Quality products, competitive advantages and faster times to market. We help our customers to develop testing programmes with which they can obtain the data they need to make the right decisions relating to the material performance of their products.

Website See all products
APT ANGEWANDTE PROZESSORTECHNIK GMBH

Germany

APT Angewandte Prozessortechnik GmbH from Hürth near Cologne, Germany, is one of the experts in leak testing all over Germany. The company specialises in the production of high-quality measuring instruments, including, for example, a leakage tester. In addition to various further systems and facilities for leak testing, the range of services includes development through to production for vacuum or overpressure processes including individual consulting. Testing devices in our PMD02 series are developed for professional leak testing – with high flexibility, robustness and ease of use. The test equipment is suitable for differential pressure method as well as for the mass flow methods, or a combination of both measurement methods. The PMF01 flow testing device can be used for various control tasks, such as for oil drilling control or an injection system test. For more than 20 years, we have been providing our customers with reliable test facilities for leak and differential pressure measurement as well as similar areas. We are happy to answer your questions about our products or test methods

All the products for "device testing"

Flow test device PMF01-AxK/BxK

Leak test device PMD02-CF/DF

Leak test device PMD02-AD/BD

Leak test device PMD02-CFL/DFL

Website See all products
BAREISS PRÜFGERÄTEBAU GMBH

Germany

As a manufacturer of innovative and certified hardness test equipment and hardness test systems and services, it is our duty to guarantee quality. Our strengths are our focus on the essential and our drive to consistently meet all of our customers' requirements. As a manufacturer and family-run business we consider our responsibility to be not only to our products, but also to our employees. We serve customers in the following industries: rubber and plastics processing, automotive, medical technology, laboratories | institutes, aerospace engineering, and the food, optical, chemical, pharmaceutical, and cosmetic industries, among others.

Website

A page for your business

Can you see this? Your potential clients will too. Join us now so you too can be visible on europages

Add my business

ETH MESSTECHNIK GMBH

Germany

Welcome to ETH-messtechnik gmbh, your leading partner for precision torque sensors and custom measurement technology solutions. Since 1987, we have stood for outstanding quality, continuous innovation and a comprehensive range of products, including torque transducers, torque measuring equipment, torque testing systems, custom sensors, elastomer couplings and electric force sensors. Our strength lies not only in the wide range of standard products we offer, but also in our ability to develop custom solutions to meet the specific requirements of our customers. We work closely with our customers to create custom test facilities that meet the most stringent of demands. We have expertise in range of industries, including mechanical engineering, the automotive industry, test benches and robotics. Precision measurement of torque in industrial applications is crucial for ensuring productivity and performance. Advanced products are not all that we offer at ETH-messtechnik, we can also provide a comprehensive consultancy service. Our experienced staff will help you select the optimum torque sensor for your application. We rely on in-house production of mechanical and electronic components to ensure the highest quality standards. You can put your trust in our decades of experience, our modern production technologies, and our dedicated service.

All the products for "device testing"

DPFR-027 Checking the adhesion factor at gear units

DPFR-015 Checking the friction torque on axles of passenger cars

DPFR-003 Strength test of a ultrasonic welding

DPFR-020 Tester for dental engine

DPFR-004/032 Testing device for the friction torque

Website See all products
DK FIXIERSYSTEME GMBH & CO. KG

Germany

The core area of expertise of dk FIXIERSYSTEME has been modular fixing and clamping since 1972, particularly in tactile and optical measuring technology and computer tomography. The range is made up of a modular system including around 1000 products. The flexible combination of the modules and the durability of the elements guarantee precise measurement results and fast processes. Modular clamping systems for positioning in measuring technology, laser marking and welding technology, for dosing, in robot technology and during assembly/handling. Also available as micro-clamping and fixing technology including multiple and special fixtures. Accessories: Measuring sensors, dial gauge supports, clamping joints and concentricity test devices. Additional business segment: NETZSAVE – for surface protection and cleaning: Surface protection netting and protective mats made from plastic. Mats for industrial parts cleaning. Anti-slip mats for transport/storage. Instrument protective caps for medical technology. Taper cleaners/conical cleaners for cleaning tool mounts

Website
BASTIAN INDUSTRIAL HANDLING GMBH

Germany

Your quality service provider. Comprehensive, customer-oriented services. Quality assurance. Testing and measuring. Visual sorting activities or using technoscopes, endoscopes, etc. Error controls. Documentation. Test report. Storage. Commissioning. Shipping. 8000 m2 modern storage facilities. 2500 m2 secured yard area. 3000 heavy duty high-bay storage spaces. Warehouse software. ERP software. Packaging of individual parts. Production runs. Components. Wooden crates. Special packaging. Plastic blister. Film. Parts manufacture machining (turning, milling, etc.). Construction of jigs and fixtures. Pre- and final assembly. Component assembly. Furniture disassembled. Post-processing. Packaging. The skills: First class and up to date. Hardware. High-tech testing devices. CNC handling machines. Measuring equipment. Blister and film packaging machines. Sophisticated software. Modern storage and assembly halls. Infrastructure. Direct connection to motorway. Connection to A 8 and A 6. Central location in Europe. Qualification of specialists in all areas. Continuous further training.

Website
IT42LIFE

Germany

IT42LIFE - IT remarketing / POS - Point of Sale from Berlin. Since our company was founded in 2017, we have focussed on providing an environmentally-friendly and efficient solution for used IT devices. We have set ourselves the goal of making the IT market more sustainable and helping reduce electronic waste. Our process is based on the concept of "Recycling and re-use", which means that we ensure that used IT devices are recycled in order to minimise pollution while making sure that valuable resources are recycled. We also offer a solution aimed at giving used IT devices that still work a new use. We ensure that these devices are safe and thoroughly tested before being returned to the market with a new purpose. As a young company, we are proud that we make a positive contribution to the environment and to extending the service life of IT hardware. So if you are looking for a reliable, green solution to your IT recycling needs, we are the perfect choice. We have recently begun developing our export activity. Contact us today to learn more about our sustainable IT remarketing services! We will be more than happy to develop your project with you.

Website
HPT HIRSCH PRÜFTECHNIK GMBH

Germany

Working together with his son Henry Hirsch and employees, Hirsch develops test devices and procedures for facilitating and improving magnetic particle testing (MT) and the demagnetisation of steel components. To this aim, HPT Hirsch Prüftechnik GmbH offers the following services: Development, design and production of direct current pulse devices for magnetic particle testing (MT) and the demagnetisation of steel components Distribution and sale of devices Inspection, maintenance, repair and safety checks of supplied devices Commissioning of devices on customer's premises Training of test personnel Laboratory testing, research and development projects on behalf of customers

Website

ZANDER GMBH

Germany

Zander is a medium-sized company with 49 employees in Waltershausen, Thuringia, and has over 90 years of experience. A large team works in five different areas that do not operate separately but complement and benefit from each other. The production spectrum ranges from construction and PLC programming to gauges, bending moulds, moulding mandrels and all kinds of testing devices. Our main customer is the automotive industry. However, our clients also include non-automotive partners. We are ready to answer specific questions and requirements from our customers and offer holistic solutions or to put our departments to work on individual products. From development to use in your production, our aim is to offer complete systems or projects according to your wishes and ideas.

See all products
WEINLICH GMBH & CO. KG

Germany

Our company emerged from a service contract between Schnellpressenfabrik Heidelberg AG (now Heidelberger Druckmaschinen AG) and Leopold Weinlich, tasking him with the development of a numerical control with which he set up his own business in 1963. Today, we primarily produce modular equipment for testing engines, which can be operated easily and safely – thanks in no small part to the control devices. Our products: - Engine test benches (braking dynamometers), - control and measuring technology for transportable engine test benches, - reusable engine supports for operating engines on test benches or at no load, - set-up and preparation of engines for testing, - modernisation of dynamometers, - basis for torque testing, - bullet velocity meters for safe measurement of exit speeds on firearms, special designs for material testing, - methods for winding up cables.

See all products

Product recommendations

Liva ground resistance test monitoring and warning device

Turkey

Germany

Germany

See more products

TRAS MM

Germany

TRAS MM specializes in R & D, production and sales of precision connectors (Aluminum Ingots, Lead Ingots, Zinc Ingots, Zamak Ingots, Copper Scraps, Copper Wire Scrap, Aluminum Scraps, Used shipping containers (Used 20ft shipping containers and Used 40ft shipping containers) etc. Its products are used in Automotive Industries, computers Industries, telecom network equipment, industrial apparatuses, etc. The Company is armed with advanced precision mold manufacturing equipment, high-speed hardware pressing equipment, precision plastic injection equipment, automatic assembly line and inspection/testing devices. The company adheres to the business principle of "technology for development and quality for existence", and provides customers with quality products and considerate service based on its years of experience in R & D, production and management, great technical strength and the mature quality management system. QUALITY AND BEST OF SERVICES IS OUR GOAL AND SO OUR CUSTOMERS IS OUR SOLE RESPONSIBILITY.

See all products
FISCHER ANALYSEN INSTRUMENTE GMBH

Germany

FAN GmbH develops and distributes 13C and H2 breath-test devices. Furthermore, we are specialists in the area of 15N analysers and specialist scientific devices. We also provide support with instructions and literature for medical breath-test devices, CO2 breath-gas analysers, (helicobacter pylori) breath-test kits and substances, and for tracer technology with stable oxygen and carbon isotopes. Our company is certified in accordance with EN ISO 13485: 2003 + AC: 2009

All the products for "device testing"

Breath bags for the H.p. test

Breath bags for older

Breath Analysis

One–way mouthpiece with bacteria and virus filter

Desinfection wipes

See all products
CETA TESTSYSTEME GMBH

Germany

CETA Testsysteme GmbH Solution Partner for industrial Leak Testing and Flow Measurement CETA Testsysteme GmbH develops and manufactures leak tester and flow test devices (Made in Germany) and has more than 30 years of experience in solving industrial inspection tasks. The test media used are compressed air and hydrogen. The customers use the test equipment for quality assurance and production assurance in the production line. The wide range of services includes consulting, feasibility analysis, putting into operation, training, maintenance and calibration. CETA is certified according to DIN ISO 9001 and won the Quality Award North-Rhine-Westphalia in 2002 in the industry division. Since 2012, CETA has consistently been awarded a very good credit rating. Since 2004, the calibration laboratory (D-K-19566) has been accredited according to DIN EN ISO / IEC 17025 for the measurand pressure. The internationally recognized DAkkS calibration certificate complies with the requirements of the IATF 16949 standard valid in the automotive industry. With cooperation partners in currently 14 countries as well as several thousands of test equipment used worldwide, CETA presents itself as a competent solution partner for industrial leak and flow testing. For further information visit www.cetatest.com

See all products
BRABENDER GMBH & CO. KG

Germany

Brabender® GmbH & Co. KG was founded in 1923 as Brabender Elektromaschinen GmbH by Carl Wilhelm Brabender. Today, the Brabender® group, which has generated a steady growth in recent years, employs about 400 people. As a leading supplier, Brabender® develops, manufactures and distributes instruments and equipment for the testing of material quality and physical properties in all areas of research, development and production, worldwide, for the two application areas of Food and Plastics. The product range includes instruments suitable for a variety of task areas, whether as a single unit or complete system. However, "hardware, " and thus machinery, is not the only important factor. Appropriate, user-friendly software also determines the utility value of a testing and measuring device today. Therefore, the focus is on the development of customized software for the instruments. The Group has a presence in over 116 countries with 80 distributors and an export share of about 80%.
DEUSCHLE SPINDEL-SERVICE GMBH

Germany

Your spindle is in good hands with Deuschle. With over half a century of expertise, Deuschle is now in its second generation. Our founder, Karl Deuschle, left a considerable legacy as a pioneer of HSC technology, and now the company dynamically tailors its portfolio to the needs of the market. We are able to perform repairs on spindles that operate at up to 160, 000 rpm. No matter who manufactured your CNC machinery, Deuschle has the solution. Engine spindles are mostly used in grinding and milling machines or machining stations. Even main spindles and counter spindles on lathes require repairs on a frequent basis. The potential applications cover a large number of industries. The personal contact we maintain with our customers is an important pillar of our business. Our 40 employees are focused and receive ongoing training to keep them at the cutting edge at all times. Experienced employees (> 25 years), a modern plant, 400 testing devices and two 3D measuring machines perfect the quality we provide. We leave nothing to chance.
SCHMIERER GMBH

Germany

High-quality precision pressure gauges in line with certified quality standards and available worldwide in the shortest possible time. With 90 years of experience, we can fulfil special and individual requirements for pressure gauges and thermometers. With our in-house production facility and an extensive range of assembly and test devices, you receive your products from our production site in Groß-Gerau, Germany, in accordance with quality standard ISO 9001: 2015. It goes without saying that you get a special service from Schmierer! Calibration, filling and adjustment of pressure and DP transmitters and fitting of various diaphragm seals are also possible for third-party brands. You can also benefit from our proven repair service, whereby we repair your pressure gauges and transmitters, including those from third-party brands, to save you time, money and resources. Collaborate with a supplier with a long-term approach that conserves resources thanks to EcoVadis certification (sustainability certificate)
K.H. SCHMALZ GMBH

Germany

Plant engineering and construction, as well as manufacturing and sales of dosing systems for central and local release agent supply systems, water treatment plants, high-pressure systems, frequency-controlled, water treatment chemicals, hardness stabilisers, corrosion-resistant materials, general dosing systems, water softening and servicing. A few more products: Dosing systems for mould release agents, water treatment for dehumidifiers, dosing devices, water treatment plants, legionella testing, etc.
GAZ-PRÜFTECHNIK GMBH

Germany

GAZ-Prüftechnik GmbH stands for "Geräte, Anlagen und Zubehör in der Zerstörungsfreien Werkstoffprüfung" (devices, systems and accessories in non-destructive materials testing). We have been dealing in various test processes in non-destructive testing and the progressive development of test devices for many years. In addition to a broad range of devices and accessories for non-destructive testing, we also specialise in complete testing systems such as our GAZ testing case. Due to our long-standing cooperation with renowned partners in the fields of ultrasonic testing, X-ray testing and plant engineering, we are able to offer a broad range of non-destructive materials testing products. You will find a wealth of information about the various test processes and our products on our website, GAZ-direkt.de. You can also request a quote and configure your own testing case.

SMT-MESSZEUGE® ASCHAFFENBURG STEFFEN SCHILLER

Germany

Our company has been manufacturing and marketing precision gauges and measuring tools since 1986. The SMT-MESSZEUGE® brand was created in 1995. The SMT-MESSZEUGE range includes thousands of measuring tools and instruments, testing devices, plus special and precision gauges. Some measuring instruments we manufacture ourselves, others we have exclusively manufactured by partner companies that have been working with us for decades. We also purchase measuring and testing equipment from leading global manufacturers. Measuring and testing equipment can also be provided with the respective factory calibration certificate or DakkS calibration certificate (from the German accreditation authority), for an additional fee. We work together with various calibration laboratories. According to your drawings, we can offer a range of special designs including: Micrometers, thickness gauges, special gauges (special adaptations, taper gauges, ring gauges, plug gauges, left-hand threads, etc.), graduated rulers, steel rulers, vernier callipers, parallel supports, steel or aluminium assembly rulers, straight edges, centring angle plates, scales, verniers, graduated rules, and much more. Our 340-page catalogue (available in English and German) covers 6000 of the most widely used measuring and testing devices. To discover our extensive range of products including detailed images, dimensions, drawings and standards, visit our homepage at www.smt-messzeuge.de. You can also find more measuring equipment, such as assembly rulers, steel rulers, measuring shims, measuring callipers, surface comparison patterns and surface standards in our shop at www.messmittel.tools.
RATIOTEC PRÜFSYSTEME GMBH

Germany

The company ratioTEC develops, produces and sells high-quality testing devices and testing machines for material testing of concrete, metal, stone, paper and composite materials. Our success is measured by our reliable and innovative work, as well as our quick adaptability. This is the only way to guarantee that our customers can react quickly and flexibly to new challenges. We attach great importance to the material, functionality and design of our products. Even after investing in modern testing machines, we won't leave you alone. Your testing machines should deliver precise and meaningful measurement results over the long term. We therefore offer you a comprehensive service. This includes, for example, the maintenance or repair of technical components including factory calibration and verification. For these reasons, ratioTEC Prüfsysteme GmbH has been one of the leading manufacturers of material testing machines, testing devices and laboratory equipment for the concrete and cement industry as well as universities and technical colleges for almost 30 years.
SOURCETRONIC

Germany

Whether in the lab or in production, in building or civil engineering, automotive technology or in the field of energy - reliable electronic measurements form the base for smooth operation of countless terminal devices. Sourcetronic ensures that you can depend on your measurements. For many years Sourcetronic produces powerful electronic devices and test equipment for drive engineering, metrology and solar technology.
DEHAS MEDICAL SYSTEMS GMBH

Germany

DEHAS – 2002 to 2019, over 15 years of expertise and made in Germany solutions. Our products are used in the sectors of emergency medicine, hospitals, home care and aviation. We focus on the medical use of oxygen, dosing, mixing, measuring and displaying the resultant vital parameters. The key products are our QualityReg pressure reducers, QualityMix gas mixers, QualityMon O2 monitoring and EasyMate liquid oxygen devices. Our portfolio includes service, consultation and special construction of series or individual parts for customer-specific requirements. ISO 13485: 2016 certification and BeP (in-house test service) for pressure container construction are a matter of course; the production location is Germany. We are an original equipment manufacturer (OEM)/private label manufacturer for renowned manufacturers/companies in the medical technology and aviation industries. DEHAS – WE THINK IN PRESSURE AND FLOW!

Website
WEISS UMWELTTECHNIK GMBH

Germany

Experts around the globe. Our solutions are used around the globe in research and development as well as in the production and quality assurance of numerous products. Our experts in 22 companies are available to you in 15 countries and ensure optimal support and excellent operational reliability of your systems. Weiss Technik companies are divided into two divisions – the Environmental Simulation Business Unit and the Air Solution Business Unit. Weiss Umwelttechnik is one of the most innovative and important manufacturers of environmental simulation systems. With our test systems, various environmental influences around the globe and even beyond can be simulated as a time-lapse. Whether it is temperature, climate, corrosion, dust or combined stress testing: We have the right solution for you. We supply systems in all sizes, from standard versions to customer-specific, process-integrated systems

Website
TIRA GMBH

Germany

TIRA GmbH is a global supplier of measuring and testing systems for industry and research. We develop and manufacture modern systems and application-oriented software to simulate environmental influences, to test the properties of materials and to detect and eliminate unwanted vibrations. We manufacture and provide: Balancing machines for motor armatures, tools, articulated shafts, fans and crankshafts; electromechanical manufacturing and special-purpose machines, spindle machines, universal testing machines, modernisation of testing machines and calibration in accordance with the DAkkS (German Accreditation Body); electrodynamic vibration test systems, vibration exciters (shaker units), modal test systems, modal shakers, modal exciters, inertial shakers, long-stroke vibration test machines, vibration control systems for sine, random, shock and mixed modes, linear or hydrostatically guided slip tables, calibration systems, digital and analog amplifiers; machine and machine tool construction and mechanical engineering.

Website
FORM + TEST SEIDNER & CO. GMBH

Germany

For more than 55 years, we have been developing and producing testing machines in the Upper Swabian town of Riedlingen. One of our strengths is the design and production of high-quality special test machines according to individual customer specifications. From the smallest machine with an output of just a few newtons to 10, 000 kN pressure test machines weighing over thirty tonnes, our team of experienced engineers and technicians is able to realise the most demanding designs themselves. Due to our close contact with the leading centres and universities, we are always up to date when it comes to testing technology. Our membership of the Verband Deutscher Maschinen- und Anlagenbau (VDMA), a specialist community for testing machines, guarantees you forward-looking technologies, outstanding quality and reliable service. An independent department deals with the development and adaptation of electronic assemblies on our test machines. There's a focus here on project planning and development according to customer-specific specifications. Hardware is produced by a subsidiary in Switzerland.

Website
INOTECH METER CALIBRATION SYSTEMS GMBH

Germany

Over the last 25 years, inotech GmbH has developed into a leading manufacturer of test equipment for gas meters, testing facilities and calibration facilities and has a reputation as an expert and reliable partner for meter manufacturers and independent test centres throughout the world. In the last few years, we have also established ourselves in the water meter and heat meter test equipment area, thus adequately expanding our product range. Millions of different types of meters and counters are calibrated using our test equipment every year. Test equipment is our core business. Every day, we combine our expertise with our customers' requirements in order to continuously improve our products. In this way, we always have our customers in focus during the entire product development and production process and are always up to date with current developments.

Website
FLUKE DEUTSCHLAND GMBH

Germany

Fluke Reliability provides reliability and maintenance teams with the tools, software and services they need to optimise asset performance. With three strong brands – PRUFTECHNIK, eMaint and Fluke Connect – we serve over 70, 000 customers worldwide with an unrelenting commitment to quality, innovation and service. Our products keep our customers informed about the health of their assets, and our software and services enable better maintenance decisions that increase productivity, increase uptime and reduce costs. With Fluke's acquisition of PRUFTECHNIK, maintenance professionals now have access to a complete solution for machine condition monitoring, from quick vibration testing to in-depth analysis, while still receiving the expert technical support they have come to expect from PRUFTECHNIK. Fluke Reliability solutions enable technicians to capture the right machine data at the right time. This helps maintenance and reliability professionals to run their maintenance activities more efficiently.

All the products for "device testing"

SONOCHEK

Website See all products
TECHNO-COMPOSITES DOMINE GMBH

Germany

Do you need special, ready-to-install products made of fibre-reinforced plastics? Then we should get in touch. Creative solutions with fibre composite components/Ready-to-install GRP/CRP/Tailored/Series products and unique items. We are your system supplier for high-quality fibre composite components. Don't try just to replace your steel component with GRP. Make the most of our expertise in [consulting and planning] to develop the right and cost-effective components. Specialists work in-house at our company with a great deal of practical experience in their [designs]. This is how an idea is turned into a system component. [Production] We produce your components. Ready to install. CNC machinery, dust extraction, adhesive bonding experts, quality assurance. We'll do that for you. Simply contact us. DIN 6701-A1 | DIN 2304-S1 | DIN EN ISO 9001: 2015 | IRIS certification | ISO/TS 22163 Founded 1994 | 50 qualified employees | 4800 m² production and warehouse area | CNC machinery

All the products for "device testing"

Cover

Website See all products