Results for

Manufacturer Producer - Commercial vehicle spare parts

51 Companies

14 Products

PADANA DIESEL

Italy

The company PADANA DIESEL, is a Manufacturer/ Producer, which operates in the Spare parts for cars industry. It also operates in the truck spare, joints for industrial vehicles, industrial vehicle brake replacement, and commercial vehicle spare parts industries. It is based in Cazzago San Martino, Italy.
MURAT AUTOMOTIVE

Turkey

We are a leading manufacturer of spare parts for Japanese and Korean vehicles from Turkey. We produce spares for passenger, commercial and light commercial vehicles and 4x4 pickup truck. We offer a very large product spectrum consisting of over 9500 products. Our flagship manufacturing products are clutch forks, brake drums, manifolds, crankshaft pulleys, bolt and nuts, and all kinds of pipes from 4 mm to 40 mm diameter. Having 35 years of experience in the sector; Murat Automotive became a reliable solution partner in more than 50 countries. Our team is dedicated to customer satisfaction by providing the best service and customized solutions. We especially produce hard-to-find products in the market.

All the products for "commercial vehicle spare parts"

engine cover

water pipe

See all products
VELDO TEKNOLOJI A.S.

Turkey

Veldo Teknoloji was established in İstanbul in 2007, with the support and strength of Aldo Group, which has been operating for more than 40 years. Our company produce Hidden Automatic Sliding Door System, Electric Automatic Sliding Steps, Seat Tracking Systems and Heating Systems (convectors, under seat heaters, defrosters) for commercial vehicles and coach buses, and sells these products within Turkey and also exports them to 38 countries. R&D, mass production, sales and after-sales activities within the scope of its wide range of products continue at an intensive and continuously developed pace. In addition, customer-specific solutions are designed and produced by designing different products for the sector with innovative and customer-oriented perspective that develops with fast and state-of-the-art technologies.

All the products for "commercial vehicle spare parts"

V-board power step for commercial vehicles.

Electric single foldaway step

Electrical retractable step

Seat Tracking system

Single under seat heater

See all products
CARLSEN BALTIC, UAB

Lithuania

Carlsen Baltic is a market leading manufacturer of food trucks, as well as lightweight refrigerated truck bodies for frozen, chilled and multi-temperature food distribution. Established in Denmark in 1885, Carlsen has grown from a small family business into an internationally recognized company. Over 15, 000 light commercial vehicles were produced by Carlsen in the last decades. The company helps customers to achieve the highest possible payload and make the distribution of their goods more cost-effective. A team of dedicated engineers works together with a customer on optimizing Carlsen’s standard products to fit specific customer requirements or developing new and innovative solutions. Eutectic refrigeration system used in Carlsen bodies allows the isothermal body to operate independently from the vehicle, preserving merchandise in case of a vehicle failure and ensuring temperature stability at all times. Why choose Carlsen Baltic? · Lightweight solution ensuring the highest possible payload · Eutectic and other eco-friendly refrigeration systems · Compatibility both with electric and internal combustion vehicles · Dedicated engineers working together with customer to develop the best solution · Service and technical assistance by Carlsen’s mobile service team or company partners · Complete solutions through partnerships with vehicle manufacturers and equipment suppliers

All the products for "commercial vehicle spare parts"

Spare parts

See all products
SNP AUTOMOTIVE

Turkey

SNP automotive dealing with European brands truck&bus spare parts for after market. One of the leader company in the market since 1984 working with over 55 countries. Our company, known as SNP Automotive, was established in 1983, is headquartered in Ankara-Turkey. We mainly deal with exporting and manufacturing of spare parts suitable for VOLVO, SCANIA, RENAULT, MERCEDES, DAF, MAN, IVECO brand trucks, and trailes, calipers as well. Owing to our reasonable prices and good quality products we have gained confidence by our customers in the Middle East, Africa, Latin America, Europe and Asia. We are able to provide our customers with especially a wide range of engine, gearbox, cabin and differential spare parts for the said models. In order for us to offer you the abundance of our spare parts and the suitability of our prices, it will be enough for you to advise us just the SNP reference/part numbers and the brands of the spare parts you are interested in.

All the products for "commercial vehicle spare parts"

Truck Spare Parts

Truck Spare Parts

See all products

A page for your business

Can you see this? Your potential clients will too. Join us now so you too can be visible on europages

Add my business

R&L PARTS

Turkey

We manufacture and supply aftermarket spare parts specifically for trucks and trailers. Our range includes air springs, leaf spring components, drag links, V arms, spring mountings, engine mountings, brake pads, axle parts, bushings, mirrors, headlights, and many others. Major Brands: Man, Mercedes, Volvo, Renault, Iveco, Daf, Scania, Bmc, Ford, Ror, Bpw, Saf, Jost, GF, Setra, Neoplan, Travego,

All the products for "commercial vehicle spare parts"

Engine Parts

See all products
SIRVANLI ALUMINYUM DOKUM VE METAL ISLEME A.S.

Turkey

Sirvanlı Aluminium Casting&Machining is the only casting company in Turkey, who is able to do Sand casting, Gravity Die Casting and High Pressure Die Casting under the same roof together with CNC Machining and Heat Treatment, Powder Painting in house, as well as our own tool shop and parts assembly line. We are currently supplying aluminum casting parts to mainly these industries with more than %80 export rate: • Automotive&Defence %45 • Energy (Mid-High Voltage, substition equipments etc.) %20 • Transportation&Railway Industry %15 • Lighting Industry %5 • Machine Industry %5 • Others %10 We have enough free capacity after 2nd factory, thanks to a recent addition of more factory space and are ready to take on new projects. We would very much appreciate the opportunity to show you what we can prepare price offer for your needs.

All the products for "commercial vehicle spare parts"

Aluminium automotive parts

See all products
DEMOSAN

Turkey

DEMOSAN AUTOMOTIVE, established in 1997, has been in the big vehicle class since that day; Exhaust Manifold, Water pump and housing, Fuel and oıl pump, Fan Retaıner, Special production according to your request, Other parts. Mainly producing many kinds of kits, parts and tools. Our company, which closely follows the technological developments, has state-of-the-art CNC and processing machines in its possession. With the same diligence and business volume, with a wide range of fans; Production for VOLVO, DAF, SCANIA, MERCEDES, MAN, IVECO, BMC, RENAULT and OPEL brand vehicles continues unabated.

See all products
EBS AFTERMARKET GROUP

United Kingdom

With four distribution points in UK, Ireland & Holland, EBS Aftermarket Group are proud to be one of the leading commercial vehicle components distributors and manufacturers in Europe. EBS Aftermarket Group offer one of Europe's largest product range in air braking systems components in the aftermarket automotive industry, covering all commercial vehicle components from braking systems to turbochargers, steering, pumps, electrical and diagnostic test equipment. Our Companies: European Braking Systems Ltd. Quality Control, product development, brake manufacturing and central distribution. Drakefield. Specialists in air brake and commercial clutches as well as in diagnostic test equipment. Assured Performance Ireland (API). Specialists in turbochargers, air brakes, ERG Valves, power steering and water pumps. Air Brake Company Holland Our detailed knowledge of all types of classic and new air brake systems is invaluable to our customers. We are proud of our specialists who have a wealth of historical and contemporary technical documentation. If a part is no longer there, we make or overhaul it. The Air Brake Company Holland team proves what the company stands for: technical craftsmanship, drive and detailed knowledge. If we can't solve something, then nobody can. Knowledge, passion and dedication; that is Air Brake Company Holland.
NAZSAN MAKINA OTOMOTIV SAN. LTD. STI.

Turkey

We’re a gear and machine spare parts manufacturer based in Aydin/TURKEY. We're producing and exporting OEM gears and spare parts for machines and equipments. We haven't compromised on quality throughout our working and production life by developing and keeping up with the times since 1994. For this reason, we are proud to be the reason for the preference of corporate companies in our country. We successfully exported to 10+ countries as a result of our attempts to evaluate these acquired experiences in the foreign market. We're very experienced with especially earthmover, heavy-duty machinery, truck, tractor gears, ZF and Carraro transmissions, and other sector machine parts (agriculture, marble, textile, etc.). In addition to the products you can see in our catalog, we are happy to assist you with all kinds of metal works within the dimensions of our machine benches. We just need the technical drawings of the parts you requested and the quantity to prepare a beneficial quotation. Because of we're working with manufacturers from different sectors it gives us a very advantageous position and regarding this cooperation with these manufacturers helps us to get feasible prices. Please do not hesitate to ask if you have any further questions.

KOMMAR AUTOMOTIVE

Turkey

Kommar Automotive is specialized in the production of spare parts for MERCEDES BENZ, MAN, SCANIA, VOLVO, DAF, RENAULT heavy duty vehicles. The products that Kommar Automotive manufactures are as follows, Clutch release fork and their repair kits, Exhaust engine flap and their repair kits, Injection system nozzles and other parts, Fuel injection system parts and nozzles, Grooved nuts, and other engine parts. Kommar Automotive provides its customers with the best prices and high quality. Kommar has proved its brand and quality in many countries and expanding its customer portfolio in the new markets which wasn't penetrated yet.
FOURES AIRSPRING

Turkey

ESSA Company is air springs producer for heavy vehicles. Our company produces Roll Bellows, Service Assemblies, Convoluted Bellows, Cabin and Seat Bellows. We are located in Bursa, Turkey. Our capacity at the moment is 20, 000 pieces per month and we aim to increase productivity. Production at the steam presses. ISO9001: 2008 quality certification. We have many experiences year in mold construction for air spring sales aftermarket companies in our own mould factory ESSA also. For more details please be so kind and visit our website: http: //www.fouresairspring.com/on-line-catalog/ We can also produce with your own brand on Air springs (provided that the number of units annually). Production which is built owned manufactured equipment’s; raw materials are supplied from world-wide companies for the best quality production. After the production process air springs are prepared for the market being processing of quality controls as exploding, cycle, leakage and the target is offering high quality products to the customers in the admitted delivery date.

IVECO NORD NUTZFAHRZEUGE GMBH

Germany

Iveco Nord is happy to advise you as an expert point of contact. We stock the entire range of IVECO commercial vehicles, from the Daily (panel vans and platform trucks), to the medium-weight Eurocargo and the heavy S-WAY and Trakker X-WAY trucks. You will therefore always find the perfect vehicle for your intended use, whether CEP, forwarding or public services. We will also be happy to advise you on-site about our comprehensive spare part and service solutions. This allows you to always remain mobile and fully concentrate on your business. Founded in Turin, Italy, in 1975, the company is now part of CNH Industrial. With 23 plants across ten countries on five continents, IVECO operates internationally and has over 25, 000 employees. There are over 600 IVECO service points in Germany, Austria and Switzerland alone. The company's German headquarters are situated in the south-western city of Ulm. IVECO guarantees a superior quality standard in its production.
HI MOTORS CO.

South Korea

H.I Motors was founded in November 2007 and we had a long time experience in the Car accessories field. We are always searching high quality products from abroad and distributed the goods in Korean Market. And we are exporting the high quality Korean car accessories. Especially, we are interested in the eco-products, energy-saving products, and car power up products. If you are interested in or searchinging for the Korean car accessories (Hyundai, Kia, Deawoo, Samsung car), please ask us. We promise to offer the best products and reasonable price with our long term experience. And also if you are interested in the Korea market, please contact us. We can give a good chance to you. We are always ready to cooperate with our future partner.
NIPAR AUTOMOTIVE

Turkey

The company NIPAR AUTOMOTIVE, is a Manufacturer/ Producer, which operates in the Spare parts for cars industry. It also operates in the commercial vehicle spare parts, vehicle suspensions, and car spare parts industries. It is based in Istanbul, Turkey.
ACT RESEARCH

Belgium

The company ACT RESEARCH, is a Manufacturer/ Producer, which operates in the Lorries, vans and commercial vehicles industry. It also operates in the Interior fit-out, vans fitted out, furnishings to drawing, and commercial vehicle spare parts industries. It is based in Kortenberg, Belgium.
LION AUTOMOTIVES

Australia

The company LION AUTOMOTIVES, is a Manufacturer/ Producer, which operates in the Spare parts for cars industry. It also operates in the air springs, truck spare parts, commercials vehicles spare parts, and automotive parts industries. It is based in Bursa, Australia.
BPW BERGISCHE ACHSEN KOMMANDITGESELLSCHAFT

Germany

The company BPW BERGISCHE ACHSEN KOMMANDITGESELLSCHAFT, is a Manufacturer/ Producer, which operates in the Lorries, vans and commercial vehicles industry. It also operates in the Trailers and tip trailers, industrial, commercial vehicle spare parts, and Trailers and tip trailers, industrial industries. It is based in Wiehl, Germany.
INFINITE AUTOMOTIVE

Turkey

Our company, which was founded by Hüsnü ŞENOL in 1983, took the first step in the textile sector. In 1994, it increased its product range with the production of auto curtains and headboards, and expanded further with interior and exterior design materials. By increasing its foreign trade volume as much as possible in 2005, it transports 70% of its production abroad. Infinite Automotive has always maintained and will keep its respectable place in the sector by carrying its wide product range further with international quality standards and reliability. Now we mostly produce commercial vehicle curtains and buy&sell spare parts for conversions.
QTION TRUCK PARTS CO., LTD

China

Qtion Truck Parts Co., Ltd is a global suppliers of aftermarket spare parts for European and Japanese Trucks, Trailers and Buses.Established in 2003 and based in Zhejiang China with the intention to meet any of our customer's needs and offer a fast and efficient service.We offer only ISO/TS16949 Certificated replacement parts and service. Supported by our team of highly experienced truck parts specialists. We look forward to receiving any inquiry from you, which can be contacted by qtion@qtion-truckparts.comQTION supply spare parts for (Mercedes Benz, Scania, Renault, Volvo, Iveco, Daf, Man, Leyland, ERF) and (Hino, Isuzu, Nissan, Mitsubishi) Commercial Vehicles, alsooffer aftermarket spare parts with brands (WABCO, Knorr-Bremse, Haldex, Meritor, Kongsberg, BPW, Bosch, SKF, )Our Products Range : Brake System, Body Parts, Engine Parts, Clutch Parts, Cooling System, Gearbox Parts, Electrical System, Fuel System, Steering System, Suspension Parts, Cabin Parts, Axles Parts, Exhaust System,

MABANOL GMBH & CO. KG

Germany

Your partner for quality and service. Mabanol's broad range of lubricants and asphalt attends to the needs of national and international trade partners and users from a variety of industry segments. Your requirements for all matters relating to lubricants should always be high. Mabanol is the independent brand of the medium-sized German lubricant trade. Our wide variety of lubricant products guarantee precision and reliability. And that applies to automotive and industrial uses. Trust is the foundation of every business relationship. Choosing Mabanol guarantees that you have the right partner at your side. Our technical expertise, independent thinking, reliability and flexibility make us stand out. You can rely on consistently high quality, expert consulting services and a comprehensive service, now and in future.

Website
REICH-KUPPLUNGEN ; DIPL.-ING. HERWARTH REICH GMBH

Germany

Founded by my grandfather in 1946, our family-run company has been continually developing ever since in line with the market requirements – from a spare parts manufacturer for the mining industry to an inter- nationally renowned specialist in power transmission engineering. Today, we develop and produce torsionally flexible couplings at a high level of vertical integration under the REICH-KUPPLUNGEN brand. These products are predominantly used for combustion engines in stationary and mobile applications – for example in power generation plants, in construction machinery, in commercial vehicles, in railway engineering, and in the shipbuilding industry. Another essential component of our success is the “Designed to Customer” principle which allows us to create customised high-quality and long-lasting power transmission products in close cooperation with the customer. Our commitment to flexibility, quality, and on-time delivery, and our ability to respond to the most di- verse requirements are providing daily proof that customer satisfaction is of top priority to us. Since I joined the company’s management I have dedicated my efforts to preserve these values and to position our company for a safe and successful future also in the third generation. Yours, Christian Reich

Website See all products
ANTARES LIFE CYCLE SOLUTIONS GMBH

Germany

We are happy to solve difficult problems and are a "long tail" service provider specialising in procuring spare parts for machines, engines and systems. Our range of services encompasses reverse engineering of old components, supplying such slow movers, spare parts and assemblies and, as a separate consulting service, product range analysis and optimisation. In this way, we help our customers to reduce their complexity and working capital and increase their delivery performance. Many well-known OEMs from the off-highway and commercial vehicle sectors, such as AGCO, Wärtsilä Quantiparts, CNH, John Deere, MAN Truck & Bus, CATERPILLAR MWM, Liebherr, Claas, Deutz, Rolls-Royce mtu, Guascor Energy, Drache Umwelttechnik, Hengst, MANN+HUMMEL and Boll & Kirch already rely on our solutions. Needless to say, we are certified in accordance with DIN ISO 9001: 2015.

All the products for "commercial vehicle spare parts"

Slow-Movers and Spare Parts

Website See all products
BESCO AUTOMOTIVE

Turkey

Established in 2008 in Konya, Turkey, BESCO stands as a premier manufacturer of top-quality Air Disc Brake Caliper Repair Kits for heavy-duty commercial vehicles. Renowned for our trademarks CHEEFT upholds stringent standards of production, operation, and service, prioritizing client satisfaction and fostering talent within our organization. Driven by an unwavering commitment to innovation and improvement, we lead the automotive sector by continuously meeting evolving market demands. Our global presence empowers us to serve clients worldwide with a diverse range of products tailored to their specific requirements. Our caliper repair kits boast compatibility with leading brands like Knorr, Meritor, and Wabco, as well as vehicles from esteemed manufacturers such as MAN, Daimler MB, and Volvo. Aligned with our mission and vision, our quality policy focuses on enhancing our standing in the automotive and spare parts industry. We aim to expand our product range, refine processes, and enhance technical competencies to better serve our clientele. Contact us today to discover how we can fulfill your needs!

Website See all products
WEST SPARE PARTS

Turkey

Our company was established under the name of West Spare Parts with a German and Turkish investment partnership. Our company aims to be an end-to-end solution partner to our valued customers around the world in automotive and heavy vehicle spare part sector. By combining domestic production with European standards, we offer the best quality to our customers in the most economical way. In After Market products, we deliver spare parts of the world's leading brands such as Man, Mercedes Benz, Volvo, Scania, Iveco, Daf, Ford, BMC, ZF, Renault to our customers in time. Instead of short-term commercial expectations, long-term mutual cooperation and formations based on satisfaction are among the priority targets of our company. We are proud to offer a wide range of manufacturing and expertise in all spare parts and component accessories, engine parts, electrical parts, brake parts as well as hydraulic and pneumatic auxiliary parts. Apart from the standard catalog products, we evaluate all requests from you and have the appropriate ones produced by our manufacturer business partners in required standards. West Spare Parts also meets many special manufacturing demands in Europe. These include sheet metal forming, machining, mold parts, special fixture equipments used in automotive. We are ready to assist you at any time for your requests. Transmission parts and gears Differential parts Oil pumps Water pumps Repair kits Hydraulic pumps axles Cooling Aircompressors Brake and disc

See all products
ARLI OTOMOTIV SAN. VE TIC. LTD.ŞTI.

Turkey

ARLI Automotive producing flywheel, ring gear and clutch pressure plate for mostly commercial vehicles exports its products to world's leading aftermarket companies especially in Europe. Clutch parts of truck, bus, semi-trailer truck and heavy vehicle in various makes and models can be found in its production range. Quality has always been its number one priority while offering the most reasonable prices in the automotive spare parts industry. Along with the foundry and the state of the art manufacuring facility it has, does not compromise on its service given to valued customers by making custom production for the flywheels and the ring gears which are not yet available in its production range. For more information please do not hesitate to visit our website and contact us.

See all products
IC ANADOLU MAKINA SAN TIC.LTD.STI

Turkey

Since 2008 our company specializes in manufacturing, forming and selling of an original and after-market spare parts for european trucks and commercial vehicles like Mercedes, Man, Volvo, Scania, Daf, Renault Air Brake Caliper Repair and Maintenance Kits Like : MERITOR, KNORR, WABCO, SAF, HALDEX well known brands.Our production line consists from two different section ; One of them is ‘’CNC Machining Plant’’ and Second is ‘’Investment Casting Plant’’.In our production line all heavy duty parts made from ‘’4140’’ Alloy Steel material quality with 55 - 58 rockwell hardness ratio.Almost all manufacturers do not prefer to use ‘’ 4140 ’’ steel because of high material prices and heavy machining processes.Many manufacturers are using 1040 type alloy steel which is more cheaper but the precision and durability is very less.Also it is not required for the safety brake systems by the World Automotive Organisatin of OICA and by the OEM Vehicle manufacturers.***But as i mention as above we have an Investment Casting Plant because of this we can produce each/day thousand pieces of caliper parts with less time and machining operation with 4140 material quality.Which other manufacturers can not do because of investment casting plant. Thats why we have the chance to increase the quality and to reduce the costs of each caliper parts to prepare the best competitive prices for our customers and export markets.We pleased you to visit our website : www.cmgcaliper.com
OMS MAKINA IMALAT SAN. VE TIC. LTD. STI.

Turkey

Our company is active in commercial vehicle sector and we produce European standard quality parts for the trailer industry such as landing gears, king pins and container twist locks. OMS has a leading position in producing European standard quality trailer spare parts in Turkey. We are aware of the urgence for the need of trustworthy and competitive priced products, especially with the economy of today. This is one of the reasons why OMS is chosen as a supplier. Please remember the three most important things about OMS. 1: Trustworthy European standard quality! 2: Competitive prices! 3: Superior customer support before and after sale!
AHEN AUTOMOTIVE

Turkey

Our company was established to produce cylinder heads for heavy duty commercial vehicles in 2017 with more than 35 years of experience in automotive spare parts sales & marketing. In our 1250 m2 closed 750 m2 open production area, we manufacture cylinder head and more than 100 engine parts connected to it. As Ahen Otomotiv, we have 20.000-cylinder head production capacity per year with 12 different models in our cylinder head manufacturing line at high standards in controls made at various points of production processes. In our production chain, we are able to make our model and mold designs by ourselves, produce our own tools, perform our machining and operate our quality control and guarantee processes without problems. We constantly follow market requirements and develop our product range accordingly. We maintain modernization in intercorporate production, and we are making forward looking investments in this direction. We are paying attention to the demands of our domestic and foreign customers and we are trying to create a solid future together with them.
ROTPAR OTOMOTIV LTD. ŞTI.

Turkey

Our Company is the manufacturer and exporter of Steering and Suspension ; 1. And the front layout as parts rod 2. Ball Joint 3. Tie Rod End 4. Axial Joint 5. Stabilizer Link 6. Ball Joint Arm 7. Middle Rod 8. Bush 9. And Spare Parts With 29 years of experience ; • Team of practically & Technically Experienced People • More than 3000 Parts in Range • More than 100 Parts added to Range in a Year • Developments according to sample or drawings • Quality Control Manufacturing • Serving Extensive Range of Products for ; o Passenger Cars o Tractors o Commercial Vehicles o Trucks o Work machinery o Military vehicles