Add my company Get multiple quotes Log in
  • europages
  • >
  • COMPANIES - SUPPLIERS - SERVICE PROVIDERS
  • >
  • injected plastic packaging

Results for

Service Provider - Injected plastic packaging

Service Provider
29 Companies 59 Products

  1. DECAPAC

    Belgium

    DECAPAC offers a comprehensive solution to your packaging problems, providing you with an extensive choice of high-quality synthetic packaging materials suitable for use with a very wide range of products. With its 15 years' experience of injection molding techniques backed by high quality decorations subject to a continuous improvement programme (IML and offset printing), Decapac is one of a select group of suppliers of top-end luxury packaging. In addition to packaging, Decapac also offers an extensive range of heat-seal films and pre-cut lids made from a variety of materials dependent on temperature range requirements. DECATRAY injected and thermoformed, heat-weldable plastic packaging for gas packing/MAP, DECATP encapsulated packaging with tamper-proof closures. Boxes, seals, trays, small pots, small containers with covers and/or membrane seals, IML printing (labels), offset printing. Made to measure designs, mould design and aesthetics. Heat-seal film, also pre-cut.

    See all products

  2. HODA, UAB

    Lithuania

    Verified by europages badge

    HODA, UAB is a company based in Lithuania specialized in plastic injection moulding since 1993. Over the years we became one of the biggest plastic injection moulders in the Baltic states with important production capacities. Our goal is to produce high quality products and meet our customers' requirements for a competitive price. At the moment our company operates with more than 70 injection moulding machines, which gives us flexibility to produce different sizes and purpose plastic parts from a fraction of gram up to six kilograms of mass. Our wide range of services includes mould tool manufacturing, plastic injection moulding, insert overmoulding, DC (dual- component) injection moulding, gas assisted injection moulding, thermoset moulding, plastic blow moulding, decoration, tampo printing, screen printing, wet painting as well as assembly and packaging. We deliver both in Lithuania and all around the world. We are proud to be certified according to ISO9001, ISO14001, GMP and IATF 16949 standards. Moreover, we constantly improve our management system to preserve the environnement in accordance with food safety regulations. Don't hesitate to contact us for more information !

    Website Open In New icon See all products

  3. INTERNATIONAL SCIENTIFIC SUPPLIES LTD

    United Kingdom

    ISS produces and sells laboratory consumables, plastics, blood collection tubes and containers for over 20 years. The company supplies also custom injection and vacuum mouldings, customer specific labelling and filling options and bespoke packaging and gamma irradiation of virtually any consumable. 24 Hour Urine Collection Bottles Auto Analysis Cups Autoclave Test Kits Bags - Autoclave Bijou and Universals (glass) Blood Collection Tubes Capillaries - Glass Caps Centrifuge Tubes Containers, Blue for Food & Dairy Sampling Cryo Vials Cuvettes Dippers & Ladles Gloves Insert Vials & Re-Caps Jars (Histology) Loop & Spreaders Microcentrifuge tubes Microscope Slides and Coverslips Microtitration Trays and WHO Trays Milk Vials Petri Dishes Pipettes (Serological) Scintillation Vials Sharps Bin Swabs Sweetie Jars Test Tubes (Plastic) & Caps to Fit Transfer Pipettes (Glass) Transport & Storage Vials and Caps Universals (Specimen Containers) Warning Tape Water Sampling Bottles Weigh Boats

  4. AD MOLD., LTD

    China

    AD Mold locate in Shenzhen of China, established in 2009, 50 employee with tool shop at 2, 000 square meters, focus on plastics injection mold-making & injection molding covering industries automotive, home appliances, electric-electronics, medical & Healthcare, packaging, construction, consumer products, agriculture, sporting goods, furniture etc; Mold Spare parts and Metal components are one of our services. Our team is comprised of experience mold designers, mold manufacturing personnel, quality control personnel. AD mold is specializing in building Multi-cavity molds, Complex Structure molds, Tight tolerance precision molds and High gloss molds.Main service: plastic injection mold, die-casting mold, rubber mold, metal components, plastic products, mold design service...

  5. GELU-COM SRL

    Moldova

    "Gelu-com SRL established in 2008 has 3 main activities: 1. Our company is the leader in Moldova's market on plastics packaging products and solutions. We are selling a large range of plastics products like: pallets, crates, big-boxes, containers, bins, shelves etc. We are selling best european made products from such companies like Smart-Flow Europe, Gamma-Wopla, Benoplast, CAPP-plast, Agrogest. 2. Our CAD studio will help you with your project for mouldmaking and plastic injection molding in Moldova. We are also selling D-M-E products in Moldova. 3. Our devision for corporate management and accounting will help you to set-up and administrate a company in Moldova and in Luxembourg / Cyprus /London.We have COMPTEX SRL (Luxembourg) as our partner.Would be glad to collaborate with you too. Please welcome to contact us!

Office Building Outline icon
A page for your business
Can you see this? Your potential clients will too. Join us now so you too can be visible on europages
Add my business

  1. HANTECH MOULD INDUSTRY CO.,LTD

    China

    Hantech Mold Industry Co., Limited is a leading manufacturer of injection moulds, blow moulds and die-casting moulds as well as metal components machining in south China. Founded in 1997, we specialize in the design, development and manufacturing of high-quality plastic injection moulds and injection-moulded products for the plastic industry worldwide. We possess high speed CNC machines, a precision mirror-EDM machine, slow wire-cut machines, milling machines and grinding machines in our mould workshop. In addition, we can also provide services like injection moulding, screen printing, hot stamping, painting and assembly. Our moulds and plastic or metal parts have been successfully exported to the U.S.A, Europe, Australia and Asia. Our company manages the entire operation including designing, mould making, testing, moulding, packaging and exporting. With this complete in-house service, we're your ideal partner for new product ideas.

  2. CONTOR GROUP

    Romania

    Manufacturer and supplier of water meters and AMR systems for water markets. Core competence: WATER METERING PRODUCTS AND SYSTEMS: [1] residential water meters: single-jet dry dial, multi-jet dry and wet dial, rotary piston volumetric water meters; [2] bulk and industrial water meters: horizontal WPH, single-jet class C dry dial, irrigation and compound water meters; [3] full-package AMR technologies: meters and electronic heat costs allocators endorsed with radio emitters, portable receivers and data concentrators, GPRS/GSM communication equipments, specific software applications. ENHANCED PRODUCTS AND SERVICES: test benches for water meters, brass die casting parts, CNCs mechanical processing, precision plastic injection parts, electrostatic powder coatings, plastic injection molds & tooling, nonferrous casting dies & tooling, metrological testing & calibration, meters maintenance & refurbishing. Certification: ISO 9001, ISO 14001, OHSAS 14001, ISO/IEC 17025, 75/33/EC, 2004/22/EC.

  3. BDP MECHANICAL COMPONENTS DEUTSCHLAND GMBH

    Germany

    Verified by europages badge

    The bdp Group, founded in 1992 and comprising 150 employees, is based in Berlin with over 14 further offices in Bulgaria, China, Germany, Poland, Spain and Switzerland. The subsidiary bdp Mechanical Components, which has existed since 1982, is a specialist supplier in the international sourcing of casting, forging, machining and automotive parts for European manufacturing companies from China and Eastern Europe. We supply over 50 European customers in the automotive, mechanical engineering, rail, energy, gas and liquid transport sectors. Everything from a single source: Model making, initial sampling, parallel production (start-up), series production, optimisation. Product quality. Strategic acquisition: Optimisation of acquisition processes, reduction of acquisition costs. Selection of suitable suppliers, supplier audits: Evaluation of technical production and quality capabilities. Quality control on site: Monitoring production, outgoing goods inspection before shipping

    Website Open In New icon See all products

  4. STIELER KUNSTSTOFF SERVICE GMBH

    Germany

    Verified by europages badge

    Since 1998, Stieler Kunststoff Service GmbH in Goslar has developed innovative solutions for special technologies in the field of plastics engineering & sells equipment technology produced in-house worldwide. The technologies include processes such as internal gas pressure, external as pressure, water and projectile injection, physical foaming with our own patented process and much more besides. Our CoolFlow technology (rinsing with nitrogen at -30°C) is one of our key technologies for reducing warping tendencies and, above all, cycle times. There are also tempering techniques which can remedy special problems in plastic injection moulding, e.g. change tempering with steam or induction to avoid weld lines or poor surface quality. CO2 tempering can be very effective in tempering cycle-dictating points in the mould, where water is unable to do this. The plant technology service is provided worldwide by trained service staff. With the managing directors' experience with these special technologies stretching back over 30 years together with in-house developments, the company is in a very special position. From article and tool construction through system and equipment design, installation and commissioning to the optimisation of components, every service area is covered. Do not hesitate to contact us if you encounter any problems in the field of plastic products with regard to: sink marks, delays, cycle times, dimensional tolerance.

    Website Open In New icon

  5. MATRIZ JUBILANTE UNIPESSOAL, LDA

    Portugal

    Verified by europages badge

  1. MECANHOR

    France

    The company MECANHOR, is a Service Provider, which operates in the Spare parts for cars industry. It also operates in the Pad printing, Pad printing, Pad printing on stoppers, Plastic injection, and Plastic injection stopper caps industries. It is based in Decines Charpieu, France.

  2. ASPEL POLYFORM

    Belgium

    The company ASPEL POLYFORM, is a Service Provider, which operates in the Injection moulding of rubber and plastic industry. It also operates in the Rubber and plastic - processing, Rubber and plastic - processing, and Plastic injection industries. It is based in Limbourg, Belgium.

  1. MK TRADE

    Finland

    We are trading company in Finland. We have 10 years of international experience about mold manufacturing, injection molding and design - planning work. We can do the planning and realization from the beginning to the end, all we need is your idea of what you would need. The companies we work with have been in this industry for more than 30 years. Hence, they understand exactly what a complete solution should look like. Please contact us for further information and for your inquiries. Mesut Kaya

  2. POLY-PRAT,S.A.

    Spain

    The company POLY-PRAT,S.A., is a Manufacturer/ Producer, which operates in the Injection moulding of rubber and plastic industry. It also operates in the Quality - certification, Plastic injection, mould building, and Quality - certification industries. It is based in El Prat De Llobregat (barcelona), Spain.

  3. FERONYL

    Belgium

    The company FERONYL, is a Multi-Category, which operates in the Injection moulding of rubber and plastic industry. It also operates in the Plastic injection, moulding of plastic materials, and injection moulding of plastics industries. It is based in Mouscron, Belgium.

  4. FIG PLÁSTICOS

    Portugal

    The company FIG PLÁSTICOS, is a Manufacturer/ Producer, which operates in the Plastics - industrial products industry. It also operates in the Injection, plastics - machinery, Ultrasound systems - Processing plastics, Extrusion of rubber and plastic, Plastic injection, Injection, plastics - machinery, Ultrasound systems - Processing plastics, and Extrusion of rubber and plastic industries. It is based in Zona Industrial En 1 Norte, Portugal.

  5. A.T.P. DI BARBON RENZO & C. S.A.S.

    Italy

    The company A.T.P. DI BARBON RENZO & C. S.A.S., is a Service Provider, which operates in the Injection, plastics - machinery industry. It also operates in the injection press for plastics industries. It is based in Conegliano, Italy.

  6. DEXPROM

    Portugal

    The company DEXPROM, is a Manufacturer/ Producer, which operates in the Moulds, plastic and rubber industry industry. It also operates in the Injection moulding of rubber and plastic, Moulds, precision, Injection moulding of rubber and plastic, injection moulding of plastics, and Moulds, precision industries. It is based in Maceira, Leiria, Portugal.

  7. CAFUTA D.O.O.

    Slovenia

    We are an innovative company specializing in the development of new products, improving the construction of existing products, and in solving production problems. We offer tailor-made support in all stages of product development, from design to validated prototypes, including support in establishing serial production. We have many years of experience with working in the automotive industry and in product development meeting the requirements of OEM and TIER1 suppliers. We can provide most of the activities of the development project: communication, 3D modeling, computer simulations, drawings, prototype manufacturing and testing. Our clients are tool industry companies and production companies. In addition to consulting services, we also offer process optimization and development of tools and new technologies. We are ecologically conscious and want to make an important contribution to the low-carbon economy. For that reason, we strive towards successfully completing at least one development project in the field of low-carbon technology per year, in addition to other market activities. We enthusiastically share our experience with you and utilize them to accomplish your goals. A challenge motivates us, by overcoming it, a company learns, develops, and grows.

    See all products

  8. PRO-MOULDS (MIDLANDS) LTD

    United Kingdom

    Pro-Moulds (Midlands) Ltd was established in 1993 to provide a complete toolmaking service to the plastic injection moulding industry! Ever since that day we have grown and adapted until now where we are widely regarded as one of the UK's leading toolmaking companies. Run by hands on and experienced directors, working with a highly skilled team of toolmakers, we have completed a large number of projects for some of the UK's leading companies. Precision and efficiency is key to our business, and it is this lean operation that has allowed us to grow at the rate we have for the last 25 years! We are experts in plastic injection moulding, tool repair, toolmaking and even laser welding! working to create a wide array of tools for large UK, and European customers. For more information about us, what we do and how we can help you, get in touch with us today! Our team would be more than happy to help you with your toolmaking, tool repair, injection moulding and laser welding requirements. Customer service is key to us here at Pro-Moulds, and we aim to ensure that every customer we work with is happy with the workmanship and the overall quality of the products!

  1. BARON SOLUTIONS

    Germany

    The company BARON SOLUTIONS, is a Multi-Category, which operates in the Injection moulding of rubber and plastic industry. It also operates in the Injection, plastics - machinery, Injection, plastics - machinery, and Surface treatment industries. It is based in Aschaffenburg, Germany.

  2. FOR. PLAST

    Italy

  3. 3D HUBS - DIGITAL MANUFACTURING PLATFORM

    Netherlands

    3D Hubs is an online manufacturing platform (for 3D printing, CNC machining, injection molding & sheet metal working) that enables engineers to access virtually unlimited on-demand production capabilities through a global network of manufacturing partners. Engineers can upload their designs directly, receive an immediate offer and can start the production of their prototypes & parts with just a few clicks. The company founded in Amsterdam in 2013 is one of the fastest growing and most innovative companies (Deloitte, 2019) and already works with more than 35, 000 companies worldwide to manufacture their prototypes & parts, including 27% of the Fortune 500. With the motto "Offer in Seconds, parts in a few days ", 3D Hubs has set itself the goal of accelerating innovation in all industries, offering all common digital manufacturing processes, including 3D printing, CNC processing, injection molding and sheet metal processing.

    See all products

  4. DANESI PIETRANGELO

    Italy

    The company DANESI PIETRANGELO, is a Service Provider, which operates in the Injection, plastics - machinery industry. It also operates in the injection press for plastics industries. It is based in Fara Gera D'adda, Italy.

  5. LOVRIC MASCHINENHANDEL

    Austria

    The company LOVRIC MASCHINENHANDEL, is a Service Provider, which operates in the Used machines and equipment industry. It also operates in the Injection, plastics - machinery, injection moulding of plastics, and Injection, plastics - machinery industries. It is based in Tribuswinkel, Austria.

  6. AQUILA SERVICE S.R.L.

    Italy

    The company AQUILA SERVICE S.R.L., is a Service Provider, which operates in the Injection, plastics - machinery industry. It also operates in the injection press for plastics industries. It is based in Breganze, Italy.

  7. WALONA - TODOROV CO

    Bulgaria

    Walona company was established in 1989 in Sofia city, Bulgaria with all private capital.We have injection moulding machines for production of plastic parts and moulds to produce. Most of our production is loaded with a matrix and plastic details by the requests of our clients. We work with sole traders and companies from all our country. We can give you an assistance for design and make a matrix with the desired form. We have own production and work with materials supplied by the customer. We have highly qualified personnel with extensive experience in manufacturing.We have potentiality and willingness to solve your specific technological problem in the special field which we are working in.Since the beginning of 2011. company is certified by international quality standard ISO 9001: 2008

  8. APITECH S.R.L.

    Italy

  9. CABRO-PLASTIC AG

    Switzerland

    The company CABRO-PLASTIC AG, is a Manufacturer/ Producer, which operates in the Tubes and pipes, rubber and plastic industry. It also operates in the Rubber and plastic - processing, Injection moulding of rubber and plastic, Plastics - industrial raw materials, Plastics - construction industry, Rubber and plastic - processing, Injection moulding of rubber and plastic, Plastics - industrial raw materials, and Plastics - construction industry industries. It is based in Goldach, Switzerland.

Find quotes for

screen europages
A page for your business
Add my business
Interactive map of the field Arrow Right icon
Filters

Results for

Service Provider - Injected plastic packaging

Number of results

29 Companies

Countries

Company type

Category