Adiabatic dry cooler - Import export

Ideal for water saving maintaining a high efficiency. All operations are managed by PLC with the possibility of remote management in “Industry 4.0” mode. Both HVAC and refrigeration sectors can be served.

Ideal for water saving maintaining a high efficiency. All operations are managed by PLC with the possibility of remote management in “Industry 4.0” mode. Suitable for both industrial and HVAC fields of application. The adiabatic cooler, sometimes called adiabatic dry cooler or dry cooler with adiabatic pre-coolers, is designed to work with both air and water, with particular attention to efficiency. The external air is used to cool the liquid during dry operation and it is pre-cooled only in hot periods with wetting cycles of about 15 seconds during adiabatic operation (“adiabatic pre-cooling”).

The PAD-V adiabatic system is the optimal solution for increasing the efficiency of air systems, with capacities from 75 to 1,100 kW. Dry operation during cold periods: ambient air is drawn in and conveyed to the heat exchange coils (where the fluid to be cooled passes through): no water in the circuit, as during standard dry cooler operations. Energy use is also optimized by electronically modulated fan speeds based on temperatures. Adiabatic operation during hotter periods: outside air passes through the humidifier pack to be pre-cooled, before being conveyed to the finned coils and performing its cooling function: efficiency is increased. This also makes it possible to work at lower ambient temperatures.

RAW/E liquid coolers (water, water/antifreeze) operate through a closed circuit, consisting of a finned coil crossed in countercurrent by ambient air. Due to the sizing of the coil, it is possible to achieve process fluid temperatures close to the temperature of the intake air. They are industrial chillers designed for fluids between 0°C up to 70°C, with external temperatures between -10°C and +50°C: cooling powers available as standard from 64 kWf up to 782 kWf, considering a 10°C difference between ambient air and supply water. “RAW” series chillers are environmentally friendly machines: the fluids used in the cooling process are simply water/antifreeze (fluid to be cooled) and ambient air (cooling fluid). In addition, the use of high quality materials allows the achievement of high efficiency values (ratio of kWf rendered in cooling to kW absorbed in power consumption).

SCIROCCO W is the new tabletype dry cooler for refrigeration, conditioning and industrial process applications.

The WWKGD24 is a compact water cooler that can easily be installed in, for example, coffee machines or a kitchen cupboard. The built-in water cooler can be easily connected to the water supply network. It requires hardly any maintenance and always supplies refreshing cooled water.

FRESC MANN PREMIUM portable industrial evaporative air cooolers from 5,760 to 13,511 m3/h The FRESC MANN portable industrial evaporative air cooler are ideal for cooling naturally and with low energy consumption in all kinds of work areas, event tents, heat sources, etc ... Its basic operating principle is to suck in the outside air and pass it through some panels moistened with water. Once the air passes through this panel, it cools and increases its humidity. By carrying out this process, the air is propelled inside the premises to be air-conditioned, reaching pleasant comfort temperatures and adequate indoor air quality for people. FRESC MANN PREMIUM portable evaporative air coolers develop an air bed from 5,760 m3/h to 13,511 m3/h with an available pressure at a maximum flow rate of 100 Pa.

Wide capacity range dry cooler series, which can be used in waterloop systems or as a free-cooling option in chillers. This small to medium capacity product is perfect for small and medium commercial buildings and various supermarkets. Available heat capacity is up to 350 kW under nominal conditions (when ETG is 35%, Tin is 45°C, Tout is 40°C and Tamb is 35°C). Flat shaped simple construction is assembled with smooth copper tubes, aluminum or copper fins and EC/AC fan motor technology. The galvanized steel and powder coated frame can be designed in horizontal or vertical position.