Protections - Import export

GREENHOUSE TAPE It is a pressure proof, acrylic based, sticky and transparent tape. It is not halogen, so it is chemical and ultraviolet rays resistant, therefore it has a general usage.

This ultra-rich day cream made from apple stem cells (PhytoCellTec™ Malus Domestica) repairs and restores the skin from the inside. The stem cells that come from the rare Swiss apple tree “Uttwiler Spätlauber” have a revolutionary anti-ageing effect. PhytoCellTec™ Malus Domestica stem cells have the following properties – they: Protect the lifespan of human skin stem cells Slow down the ageing of essential cells Mark a breakthrough in anti-ageing Have a powerfully regenerative and anti-wrinkle effect In addition, this day cream is even further enriched with vitamins A and E, Shea butter, soft almond oil and advocado oil. A unique combination that provides ultimate care, hydration and protection for your skin.

Sun Protective Skin Boost is an intensive, lifting, anti-ageing and regenerating day cream with sun protection factor 15. This ultra-rich day cream made from apple stem cells (PhytoCellTec™ Malus Domestica) repairs and restores the skin from the inside. The stem cells that come from a rare Swiss apple tree have a revolutionary anti-ageing effect. The PhytoCellTec™ Malus Domestica stem cells have the following properties – they: Protect the lifespan of human skin stem cells Slow down the ageing of essential cells Mark a breakthrough in anti-ageing Have a powerfully regenerative and anti-wrinkle effect The result is a powerful and effective anti-ageing product.

For the safety of storage areas, safety netting is ideal for preventing products stored at height from falling.

The anti-drop grille can be installed either at the back or the side of the shelving. A practical, reliable solution for optimising the safety of your products and the aisles in your storage area.

Shelf protectors

HERID KOLLMAK Protection series Five kinds of newly developed Urethane based products Si, SE, SU BLACK, SU MATT It has been launched at the end of the long research and development process to prevent scratches in life and preserve the car as new as possible. With 100% of TPU based film, it is extremely easy to apply, and maximized effectiveness of softness of the film to shorten application time. Product Specification HERID KOLLMAK is a high performance clear coated aliphatic polyurethane film that is formulated to protect the surface of vehicle from stone chips, abrasion and corrosion. It is one of the best TPU films used for automotive interior materials, and provides superb quality of workmanship. HERID KOLLMAK is easy to apply, and retains painted bodies’ original gloss while resisting yellowing staining. It also offers superior temperature resistance and self-cleaning performance for high durability and easy maintenance.

Tempered and black oxidised. Note: The pressed in plastic inserts offer optimal damage protection for sensitive workpiece faces.

WITEC Corporation was established in 2010 based on the slogan of “Value together, Happiness together”. In the early days of establishment, we supplied expendable materials to about 50 customers across the country, centering on various domestic companies, and established a corporation in Hanoi, Vietnam in 2013 to try to expand the market and products. Since then, we have introduced a manufacturing line in 2017 and are developing not only distribution but also consumer goods manufacturing and various eco-friendly products.

When the gas spring loses pressure because of leakage, there is no support force, which can play a role of safety support. With condom jacketed self-locking gas spring Scope of application : industrial, Marine,Vehicle, bed, etc Winson Pneumatic & Hydraulic Struts is a machinery products solution company specialize in developing & manufacturing various of nitrogen filled gas springs or call it gas struts,hydraulic dampers, shock absorbers. Our main products include: Compression Gas Springs/ Gas Struts/ Gas lift springs/Lift supports, Locking Gas Springs,Traction gas spring/ Tension gas springs / draught gas spring, Hydraulic Dampers, Adjustable shock absorbers, etc. These gas springs & dampers can be widely applied in the fields such as aviation, automobiles (bus,car,truck,trailer), motorcycles trunk, machinery, medical exam & treatment table,chair,bed, fitness equipments ,furniture, doors, cabinets, etc.

Clear glass, 3.2 and 4.0 mm clear glass for greenhouses and solar panels

Pure sine wave output Intelligent battery management Double conversion (online topology) LCD display with setting function Remote administration The ability to connect a diesel generator Management and administration options RS232, USB, SNMP (option), Dry contacts (option) Emergency shutdown management via Remote Emergency Power Off (EPO) port Low priority load shutdown function for continuous operation on battery power Selectable high efficiency operating mode (ECO mode) Protection of fax / modem, telephone lines RJ11, RJ45 Cold start function for starting up the UPS

THE STABILIZER IMPULSE PSN3120 will ensure the minimization of equipment failures, a high level of protection, a decrease in energy losses and a decrease in the downtime of critical consumers for a wide range of applications. IMPULSE PSN3120 can be used not only on production lines, but also to protect equipment in cottages or offices.

Manufacturing of a container for UPS, taking into account the specifics of the needs of the Customer. It is possible to equip with protective visors for additional protection from the environment, seals, antivandal locks, air conditioners.

THE STABILIZER IMPULSE PSN3300 will ensure minimization of equipment failures, a high level of protection, reduction of energy losses and reduction of downtime for critical consumers for a wide range of applications. IMPULSE PSN3300 can be used not only on production lines, but also to protect equipment in cottages or offices.

THE STABILIZER IMPULSE PSN3200 will ensure the minimization of equipment failures, a high level of protection, a decrease in energy losses and a decrease in downtime for critical consumers for a wide range of applications. IMPULSE PSN3200 can be used not only on production lines, but also to protect equipment in cottages or offices.

UPS series MINI are designed for uninterruptible power supply of critical loads with high power density server and network equipment, voice and data networks, medical equipment and entrylevel industrial installations. The MINI series is a new generation of UPS with double conversion (online) topology and fully digital control, which provides a high level of protection for the continuous operation of the connected load, which prevents costly downtime. In keeping with high fire safety requirements, the MINI series IMPULSE UPS enclosures are made of impactresistant, fireresistant ABS plastic. This inherently ensures the shock resistance and fire safety of the electrical protection equipment.

UPS IMPULSE Expert series of standby type are compact, reliable and affordable UPS designed to provide power to the load in the absence of the main power source 220V network. The UPS of the Expert series provides switching to batteries when the voltage exceeds the specified limits, but is not designed for operation in networks where the voltage can be significantly lower or higher than normal for a long time. It has a surge protector, because some of the sockets on the case can be used to connect equipment that does not require backup power, but protection from network noise is desirable. The device has a power saving function and is equipped with connectors to protect equipment connected to the telephone line and the local network.

Effective protection from an array of pathogens and airborne particles. Biologically protectiveness: Type II 99% BFE (bacterial filtration efficiency) and Type IIR BFE 99,9%. • 3-layer hypoallergenic and nonwoven material construction. • Integrated adjustable nose bridge strip clip for best fit. • Elasticated soft ear loops. • Splash resistant - an additional feature of Face Mask Type IIR. • Non-sterile face mask • Secure and comfortable fit, light, soft, and skin-friendly. Does not obstruct breathing. • Disposable products. 175 mm wide and 95 mm deep - folded to stretch over lower face (nose to chin). CE and ISO 13485 cert ified - Complies with EN14683:2019 Standard

Smart & Stylish Design Heavy Duty Glasses UV Protection Ventilation FrameAntiFog Coated AntiLiquid Splash AntiSand Dust AntiImpact

BestSuit Protection Avoid Risk of Infection NonWoven Fabric Bonded PE Film fabric weight 70gsm /M2, 270gsm /PC Color white

Exceptional filter for low breathing resistance Individually adjustable aluminum nose clip for excellent fit Ultrasonic welded headstraps for a secure seal 20 Masks/box Heavy Duty Protection Easy to Breathe Guaranteed Protection k

PiroStiker based on microencapsulation technology. PiroStiker contains inside dozens of thousands of microcapsules filled with fire extinguishing agent which enables if reached the determinate temperature and fire occurrence takes place. In case of fire, the microcapsule explodes discharging the extinguishing gas, which displace oxygen, chill the surface and suppress fire. Fire extinguishing agent is ecologically safe, it doesn’t cause harm to human’s health and doesn’t damage equipment.

FINFIRE is new generation fire extinguishers. FINFIRE "TAB" - autonomous powder fire extinguishing device to extinguish without human intervention fires of solid, liquid and gaseous substances, as well as electrical equipment under voltage: A, B, C, E classes. FINFIRE "TAB” is used in warehouse, technological, household premises, garages, apartments, shops, vehicles, and other places. Used as portable fire extinguishers or in addition to them. Extremely simplified design does not require special skills and great physical effort which helps to significantly save time in critical situations. The devices consist of a polystyrene body filled with fire extinguishing powder. Fire-conducting cords run along the edges of the body. The cords will activate the device upon contact with fire. Within 10 seconds after triggering, a pop is heard (additional warning signal). At the same time, the housing ruptures and the extinguishing powder is ejected.

Safety and wearing comfort are the most important criteria for Protector Style 300, it provides best possible conditions for a easy, secure and modern helmet. Due to the proved Protector-technology in development of helmet interior in combination with high-density polyethylene for helmet shell leads to a very comfortable helmet. Features of Protector Style 300: Weight: 310g 30mm slot in order to combine ear- and face protection Rain gutter High wearing comfort by 4-point interior design Material: HPDE Head sizes: 50-66 cm Approvals: EN 397 VDE Accessories for Protector Style 300: Sweatbands (terry or leather) Chintrap with bungee or cotton Folding face protection Hearing protection

This face shield consist of Visor bracket of aluminium, View disc of scratchproof acetate- plastic, it is movable (can be folded upwards) and is fixed to helmet Style 300 Elite (manufacturer Scott).

VISTA PRO Full mask VISTA PRO ® The new full mask serie VISTA PRO ® is characterized by its great variety and takes account of highest breathing protection. A modern succeeded construction with wide, very good closing of two sealing edges. The smooth and yet robust rubber body adapts itself comfortably to every shape of face. Firstly, the construction of a full mask provides a truly distortion-free field of vision. Even with regard to straps a new position has been chosen. Unlike with the usual full mask, the head straps are not fixed it selves to mask body, but fixed to frame of vision field. All known device connections are available. Consequently, the complete range is from simple filter apparatus with double filter connector (Vista-pro DUPLA), up to flame-resistant breathing connecter with plug-connection for high-pressure technology. A long-term mask which attracts more and more user! For maintenance no tools are necessary, a dream for every equipment manager. Vista-pro...

Respirator masks are called full mask or respirators, because they protect not only the face but also the entire face and therefore eyes are fully protected. Sealing line goes through forehead, cheeks and underneath the chin. Full masks have an additional inner mask, which on the one hand minimise the “mask dead space” (reduction of collection of consumed air), on the other hand through special routing of the air to prevent the visor misting up. The body of full masks can be produced of several materials. Therefore, mask bodies of black neoprene and normally coloured silicone are available, as well. The latter is perfectly suitable for persons with sensitive skin. All Ican- full masks of 20-serie have following features: Nack strap in plastic material, 5-point flexible straps 80°C – wraparound windshield, round thread Synthetic speaking membrane, no replacement necessary Available with Perspex-, triplex or PC glass Full masks do not always correspond to consistency. Therefore,...