Air ventilation systems for domestic use - Import export

We develop and manufacture blower components such as fans, motors, duct guides, electronics and housings and, if desired, integrate them into assemblies and devices. In addition, we develop entire blowers as well as the required equipment. Furthermore, we are your contact for fan optimisation with regard to improved volume flow, more efficient volume pressure and noise reduction.

EPP manifold boxes are used for heat recovery ventilation (MVHR). Due to EPP's insulating properties, MVHR manifolds do not need to be insulated. Manifold boxes are intended to distribute 75mm ducting around the house. The number of connectors varies based on the specifications of the user: 4-18 spigots.

The FLX-PLO-EPP-F plenum boxes are part of the FLX-REKU air distribution system designed for domestic mechanical ventilation systems, so-called the MVHR system, to which an air valve and FLX-HDPE / FLX-HDPE-A ducts with a diameter of Ø75 are mounted.

The insulated manifold box is used for mechanical ventilation systems with heat recovery (MVHR). MVHR manifolds do not need to be insulated onsite thanks to the insulating properties of EPP. Manifold boxes are designed for distribution of 75mm semi-rigid ducting around. The number of connectors varies depending on the user's specifications: 6-13 connection spigots.

The ViraClean is a high-efficiency in-line dirt trap, suitable for use on heating and chilled systems. Corrosion is a process that is difficult, if not impossible, to stop once it has begun. Corroded metal becomes dislodged and becomes water-borne debris. This debris, along with other contaminants in the system, clogs heat exchanger channels, fouls filters, and causes excessive wear in circulating pumps. Effective removal of debris is essential for increasing the operational life of the system as a whole.

Stepless regulation of EC fans, AC fan speed controllers or frequency inverters is what this potentiometer stands for. It has an off-position and the output value depends on the position of the rotary knob on the front. This potentiometer has a dry contact output that can be used to remotely switch on/off a fan, open/close a damper etc. The dry contact will be open when the know is turned completely counter clockwise. The input voltage for this potentiometer can lie between 0 - 24 VDC. The version handling 0 - 12 VDC is called the MTP-X10K-NA. The splash-proof housing of both potentiometers allows flush (IP44) or surface mounting (IP54).

HRAD in-line duct fans

AD SMALL PREMIUM evaporative air conditioners for evaporative air conditioning in industrial, commercial, agricultural or livestock premises Evaporative coolers are a natural cooling system that uses water as a cooling element. Its basic operating principle is to suck in the outside air and pass it through some cooling panels moistened with water. Once the air passes through this panel, it cools and increases its humidity. Once this process has been carried out, the air is propelled inside the premises to be air-conditioned and, based on the appropriate renovations and extraction of air, a comfortable comfort temperature and adequate indoor air quality are achieved for people. AD SMALL PREMIUM evaporative air conditioners, develop an air flow from 5,760 m3/h to 17,145 m3/h with an available pressure at a maximum flow of 100 Pa, its cooling capacity is suitable for premises from 67m2 to 255m2

AD BIG PREMIUM evaporative air conditioners for evaporative air conditioning in industrial, commercial, agricultural or livestock premises Evaporative coolers are a natural cooling system that uses water as a cooling element. Its basic operating principle is to suck in the outside air and pass it through some cooling panels moistened with water. Once the air passes through this panel, it cools and increases its humidity. Once this process has been carried out, the air is propelled inside the premises to be air-conditioned and, based on the appropriate renovations and extraction of air, a comfortable comfort temperature and adequate indoor air quality are achieved for people. AD BIG PREMIUM evaporative air conditioners, develop an air flow from 18,140 m3/h to 36,678 m3/h with an available pressure at a maximum flow of 100 Pa, its cooling capacity is suitable for premises from 300m2 to 615m2. For larger surfaces more units can be installed.

CONNECT TC100S Mix Flow Inline Blower CONNECT series is a mixed flow inline exhaust fan in various sizes. Specially designed for installing ventilation systems with high pressure, strong airflow and low noise levels. Energy Saving motor with ball bearing for log time operation. Removable body for easy cleaning, without the need to move the ducts. Mix Flow Inline Blower CONNECT are powerful enough to ventilate multiple areas with a single unit for one or more rooms of varying sizes Quality motor: Ball bearing motor Auto cut-off fuse built in motor Silicon steel lamination Pure copper winding ProtectionIPX4 Input/ Output Ducted Diameter (mm)97 (for 100 mm ducting tubing) Electrical ClassificationClass 1 Indoor/ Outdoor SuitabilityFor Indor Use Only Climatic ClassificationTropical Condition Gross Size (mm)300x180x236 Net Size (mm)297x177x234 Gross Weight (kg)1.99 Net Weight (kg)1.78 Speed selector included✓ Speeds2