Assembly and disassembly - Import export

The most preferred reason for UĞURMAK brand mobile crushing units is the ease of assembly and disassembly. Temporary project works such as dams, road construction may need to be moved to a different site at the end of the project. In such cases, as these plants offer ease of transportation, they significantly reduce transportation costs.

The most preferred reason for UĞURMAK brand mobile wheel crushing units is the ease of assembly and disassembly. Temporary furnaces established in project works such as dams, road construction may need to be moved to a different site at the end of the project. In such cases, because they offer ease of transportation, they significantly reduce transportation costs.

The most preferred reason for UĞURMAK brand mobile crushing units is the ease of assembly and disassembly. Temporary project works such as dams, road construction may need to be moved to a different site at the end of the project. In such cases, as these plants offer ease of transportation, they significantly reduce transportation costs.

Beta pins (Goup beta) A2 stainless steel Beta pin (ß) or R-clip allows you to easily and quickly hold an axle or a bolt. The ends of the beta pins are precision ground. The beta pin has the same use as the cotter pin , but its shape gives it much more interesting properties. Beta pins are very easy to assemble and disassemble. No specific tool is required to mount a beta pin and its application is varied: blocking of parts, securing of axes, etc. The diameter of a cotter pin corresponds to the diameter of the thread

Our powder paint booths are manufactured as standard or custom design according to the customer’s needs. For the cabin selection, the dimensions of the parts and the targeted capacity are the determining elements. Our booths are made of stainless steel or galvanized sheet and fully assembled with bolts to easy disassembling. Recycling is done with the cyclones in our powder coating booths with cyclone. It is preferred because it allows easy and fast color change. The powder particles which are not used passes through the cyclone unit before the filter unit. While the particles go down through cyclones with centrifugal effect, the particle that cannot be reused is sent to the filter unit and filtered there. The parts which are suitable for recycling are recycled to the system for reuse. Multi and mono type cyclone units are used in our booths. Both types offer efficiency with recycling systems, practicality with easy color changing. In filter cabins, it is necessary to change

Our powder paint booths are manufactured as standard or custom design according to the customer’s needs. For the cabin selection, the dimensions of the parts and the targeted capacity are the determining elements. Our booths are made of stainless steel or galvanized sheet and fully assembled with bolts to easy disassembling. In our powder paint booths with filter, the air is sucked through the filters while the unused powder particles are held by filters. The filters are automatically and periodically pumped air in reverse direction to direct the powder paint that held by filters to the sieve tanks which is under the cabinet for reusing. As a result of this process, the unused powder paint is recycled. Polyester-Teflon and Sinter-Lamellar type filters are used in our booths. Polyester-Teflon filters are preferred due to their low cost and Sinter-Lamellar filters are preferred due to their long filter life. Both types offer efficiency with recycling systems, economical solution

The Lindemann MP 790 Assembly Paste provides a remarkable reduction in friction and, in particular, ensures that the assembled parts can always be easily disassembled. Furthermore, it has exceptional lubricating and sealing properties

This wooden box with galvanized clips facilitates the packing of heavy products up to 5 tons. Thanks to its clip system, it is easy to assemble and disassemble and can be reused many times. It is lighter than traditional wooden boxes. Each side is separate, light, and ergonomic for the operator. It can also be easily recycled. With these boxes, goods can be transported economically, safely, and without damage. Due to the double stacking in the lorry, no air is transported. Dust-free. Reusable and reliable construction. Also used for export. FEATURES Solid: very shock resistant ISPM 15 certified Suitable for all transports (air-land-sea) Can be personalized (markings, handles, interior, open front, etc.) Also available in a reinforced version Available in custom sizes up to 6,000 x 2,400mm

Removable ball pins Replaceable Customer specific dimensions and configurations can be removed and exchanged from both sides. maintenance-free Ball pins made from steel, stainless steel, plastic Easy assembly and disassembly of the ball pins by defined forces Configuration online Light weight Application areas:Automobile industry, automation, agricultural engineering, plant engineering, vehicle engineering igubal® double spherical bearing WDGM igubal® variable double spherical bearing igubal® double spherical bearing WDGM igubal® removable angle joints Easy assembly and disassembly of the ball pins by defined forces igubal® removable angle joints not removable igubal® coupling bars configurator - not removable One side removable igubal® coupling bars configurator - removable from one side Both sides removable igubal® coupling bars configurator - Removable from both sides Removable ball pins Replaceable Customer specific dimensions and configurations can be removed and exchanged from both sides. maintenance-free Ball pins made from steel, stainless steel, plastic Easy assembly and disassembly of the ball pins by defined forces Configuration online Light weight Application areas:Automobile industry, automation, agricultural engineering, plant engineering, vehicle engineering igubal® double spherical bearing WDGM igubal® variable double spherical bearing igubal® double spherical bearing WDGM igubal® removable angle joints Easy assembly and disassembly of the ball pins by defined forces igubal® removable angle joints

igubal® - WGRM Angle joint for rotating and pivoting motions igubal® - WGRM igubal® low-cost angle joint Low-priced connection, many combination options igubal® low-cost angle joint igubal® axial joint AGRM For all mechanical combinations igubal® axial joint AGRM igubal® AGRM LC, AGLM LC Many combination potentials igubal® AGRM LC, AGLM LC igubal® removable angle joints Easy assembly and disassembly of the ball pins by defined forces igubal® removable angle joints adjustable Fixed position spherical bearings, clearance- free movement of the ball pin adjustable Replaceable Reduce costs and time with removable ball pins Replaceable igubal® - WGRM Angle joint for rotating and pivoting motions igubal® - WGRM igubal® low-cost angle joint Low-priced connection, many combination options igubal® low-cost angle joint igubal® axial joint AGRM For all mechanical combinations igubal® axial joint AGRM igubal® AGRM LC, AGLM LC Many combination potentials igubal® AGRM LC, AGLM LC igubal® removable angle joints Easy assembly and disassembly of the ball pins by defined forces igubal® removable angle joints adjustable Fixed position spherical bearings, clearance- free movement of the ball pin adjustable Replaceable Reduce costs and time with removable ball pins Replaceable

Overview for triflex® advantages Other information triflex® RSP Continuously adjustable retraction force triflex® RSP triflex® RSE Infinitely adjustable retraction force for small robots triflex® RSE Triflex® R-Set Universal module for all motions on the robot Triflex® R-Set Fiber rod modules Intelligent problem solution through directed pretension. Fiber rod modules Universal assembly kit Offers the potential to mount the fiber rod module in the desired position on the robotic arm. Universal assembly kit Strain reliefs for large cross sections Secure mounting also in the use of cables with large cross section. Strain reliefs Gliding feed-through Available with and without swivel bearing Gliding feed-through Protectors Well protected in extreme applications. Protectors Heat shield Protection against weld and metal spills up to 600°C Heat shield CF Robot special cables Special cables for long service life in robotic applications. CF Robot special cables iF-Design Award for "TRC"- and "TRL"-Design Cleanroom environments on request Series TRC electrically conductive ESD/TEX versions possible UL94-V2classification Overview for triflex® advantages Other information Application examples Interesting applications from a variety of industrial sectors Triflex® R Configure interior separation Define cables, select chain and configure interior separation. Now also for all Triflex® R series! Internal separation configurator Triflex® R QuickRobot Equipment support for various types of robots. Simplified ordering of complete systems. QuickRobot TRC.30 Inner height Bi 1: 12 mm Inner height Bi 2: 10 mm Bending radius R: 50 mm Pitch: 11.3 mm e-chain® TRC.40 Inner height Bi 1: 15 mm Inner height Bi 2: 13 mm Bending radius R: 58 mm Pitch: 13,9 mm e-chain® Installation instructions Instructions for the joining and separating of the triflex® R - TRC. Assembly Instructions TRC.60 Inner height Bi 1: 22,5 mm Inner height Bi 2: 19,5 mm Bending radius R: 87 mm Pitch: 20,4 mm e-chain® TRC.70 Inner height Bi 1: 28 mm Inner height Bi 2: 24 mm Bending radius R: 110 mm Pitch: 25,6 mm e-chain® TRC.85 Inner height Bi 1: 33 mm Inner height Bi 2: 28 mm Bending radius R: 135 mm Pitch: 30,6 mm e-chain® TRC.100 Inner height Bi 1: 37.5 mm Inner height Bi 2: 32.5 mm Bending radius R: 145 mm Pitch: 34.5 mm e-chain® TRC.125 Inner height Bi 1: 43,3 mm Inner height Bi 2: 43,3 mm Bending radius R: 182 mm Pitch: 44,6 mm e-chain® Standard mounting bracket for TRC / TRE / TRL. Also possible with strain reliefs and as intermediate connection. Standard mounting brackets Light mounting bracket Standard for the TRL version. Also compatible with TRC / TRE; possible with strain reliefs and as intermediate connection. Light mounting bracket TRCF.85 Inner height Bi 1: 30 mm Bending radius R: 135 mm Pitch: 30.6 mm e-chain® TRCF.100 Inner height Bi 1: 37,5 mm Bending radius R: 145 mm Pitch: 34,5 mm e-chain® Standard mounting bracket for TRC / TRE / TRL. Also possible with strain reliefs and as intermediate connection. Standard mounting brackets Light mounting bracket Standard for the TRL version. Also compatible with TRC / TRE; possible with strain reliefs and as intermediate connection. Light mounting bracket TRE.30 Inner height Bi 1: 12 mm Inner height Bi 2: 10 mm Bending radius R: 50 mm Pitch: 11,3 mm e-chain® TRE.40 Inner height Bi 1: 15 mm Inner height Bi 2: 13 mm Bending radius R: 58 mm Pitch: 13,9 mm e-chain® Installation instructions Instructions for the joining, separating and filling of the triflex® R - TRE. Assembly Instructions TRE.60 Inner height Bi 1: 22,5 mm Inner height Bi 2: 19,5 mm Bending radius R: 87 mm Pitch: 20,4 mm e-chain® TRE.70 Inner height Bi 1: 28 mm Inner height Bi 2: 24 mm Bending radius R: 110 mm Pitch: 25,6 mm e-chain®. TRE.85 Inner height Bi 1: 33 mm Inner height Bi 2: 28 mm Bending radius R: 135 mm Pitch: 30,6 mm e-chain® TRE.100 Inner height Bi 1: 37,5 mm Inner height Bi 2: 32,5 mm Bending radius R: 145 mm Pitch: 34,5 mm e-chain® TRE.125 Inner height Bi 1: 43,3 mm Inner height Bi 2: 43,3 mm Bending radius R: 182 mm Pitch: 44,6 mm e-chain® Standard mounting brackets for TRC / TRE / TRL. Also possible with strain reliefs and as intermediate connection. Standard mounting brackets Light mounting bracket Standard for the TRL version. Also compatible with TRC / TRE; possible with strain reliefs and as intermediate connection. Light mounting bracket TRE.40.B Inner height Bi 1: 15 mm Inner height Bi 2: 13 mm Bending radius R: 58 mm Pitch: 13.9 mm e-chain® TRE.60.B Inner height Bi 1: 22,5 mm Inner height Bi 2: 19,5 mm Bending radius R: 87 mm Pitch: 20,4 mm e-chain® Assembly instruction Instructions for the joining, separating and filling of the Triflex® R - TRE-B version. Assembly instruction TRE.70.B Inner height Bi 1: 28 mm Inner height Bi 2: 24 mm Bending radius R: 110 mm Pitch: 25,6 mm e-chain® TRE.85.B Inner height Bi 1: 33 mm Inner height Bi 2: 28 mm Bending radius R: 135 mm Pitch: 30,6 mm e-chain® TRE.100.B Inner height Bi 1: 37,5 mm Inner height Bi 2: 32,5 mm Bending radius R: 145 mm Pitch: 34,5 mm e-chain® Standard mounting brackets for TRC / TRE / TRL. Also possible with strain reliefs and as intermediate connection. Standard mounting brackets Light mounting bracket Standard for the TRL version. Also compatible with TRC / TRE; possible with strain reliefs and as intermediate connection. Light mounting bracket Assembly tool triflex® R B-version Assembly tool for disassembly of triflex® R B-version Assembly tool triflex® R B-version TRL.30 Inner height Bi 1: 12 mm Inner height Bi 2: 10 mm bending radii R: 50 mm Pitch: 11,3 mm e-chain® TRL.40 Inner height Bi 1: 15 mm Bending radius R: 58 mm Pitch: 13.9 mm e-chain® Installation instructions Instructions for the joining, separating and filling of the Triflex® R - TRL. Assembly Instructions TRL.60 Inner height Bi 1: 23 mm. Bending radius R: 87 mm. Pitch: 20.4 mm e-chain® TRL.70 Inner height Bi 1: 28 mm Bending radius R: 110 mm Pitch: 25.6 mm e-chain® TRL.100 Inner height Bi 1: 38 mm Bending radius R: 145 mm Pitch: 34.5 mm e-chain® Standard mounting brackets for TRC / TRE / TRL. Also possible with strain reliefs and as intermediate connection. Standard mounting brackets Light mounting bracket Standard for the TRL version. Also compatible with TRC / TRE; possible with strain reliefs and as intermediate connection. Light mounting bracket TRLF. 65 Inner height Bi 1: 24.4 mm Bending radius R: 100 mm Pitch: 23.1 mm e-chain® TRLF. 85 Inner height Bi 1: 32.8 mm Bending radius R: 135 mm Pitch: 31 mm e-chain® Assembly instruction Instructions for the joining, separating and filling of the Triflex® R - TRLF. Assembly instruction TRLF. 100 Inner height Bi 1: 38 mm Bending radius R: 145 mm Pitch: 34,5 mm e-chain® Standard mounting brackets for TRC / TRE / TRL. Also possible with strain reliefs and as intermediate connection. Standard mounting brackets Light mounting bracket Standard for the TRL version. Also compatible with TRC / TRE; possible with strain reliefs and as intermediate connection. Light mounting bracket triflex® RSP Continuously adjustable retraction force triflex® RSP triflex® RSE Infinitely adjustable retraction force for small robots triflex® RSE Triflex® R-Set Universal module for all motions on the robot Triflex® R-Set Fiber rod modules Intelligent problem solution through directed pretension. Fiber rod modules Universal assembly kit Offers the potential to mount the fiber rod module in the desired position on the robotic arm. Universal assembly kit Strain reliefs for large cross sections Secure mounting also in the use of cables with large cross section. Strain reliefs Gliding feed-through Available with and without swivel bearing Gliding feed-through Protectors Well protected in extreme applications. Protectors Heat shield Protection against weld and metal spills up to 600°C Heat shield CF Robot special cables Special cables for long service life in robotic applications. CF Robot special cables This system is especially suited for: First choice for multi-axis industrial robots Three versions are available: TRC: closed design; TRE: "Easy" design, very easy to fill in from outside; and TRL: the "Light" version, likewise with "easy" design Universally applicable in general mechanical engineering Secure energy supply system Multi-axis (3D movements) High torsional stability Can be shortened and lengthened as required due to the individual elements Large filling space Doesn't get stuck in the interfering edges Small bending radius Simple cable routing for three-dimensional applications with ball-and-socket system for absorption of high tensile strength Cables easy to install and replace (TRE/TRL version) Fiber rod module for partial reinforcement and to give direction TRL - One-piece element, extremely light High tensile strength without additional elements like steel cables, spring elements, etc. Typical industrial sectors and applications First choice for industrial robots Machine tools Handling equipment 6-axis Material handling system General mechanical engineering iF-Design Award for "TRC"- and "TRL"-Design Cleanroom environments on request Series TRC electrically conductive ESD/TEX versions possible UL94-V2classification

Spider stands are all-in-one expandable banner systems. Each system can be assembled and disassembled in minutes with little work.

Metal stands are the stands of choice for business promotions. The reason it is made of metal is because it is resistant to all kinds of weather conditions and impact. They become stainless. They are capable of carrying a lot of products. In particular, it is possible to see it often in places such as markets, shops and sundays. It is also available in ready-assembled and disassembled production. It stands out for its robustness. It also has many colors and models in a variety. If you also want, you can get services from our company on this issue.

All around eciency is provided by the use of pre-assembled fastening systems; fewer part types, lessened assembly costs, and mimimized supplier base are just a few of the many reasons the trend is in pre-fabricated components. Depending on the application, manufacturers can use dierent materials and take advantage of detachable or permanent captive fastening systems. Features and benefits : -Assembly costs and times are reduced -Mimimized part diversity -High level of assembly reliability -Decreased efforts in assembly -Eliminate lost parts -High load capacity -Integrated tolerance compensation -Minimized supplier base for effectiveprocurement and decreased logistic costs -Removal of thread-cutting and self-tappingscrew combinations -Omission of incorrect product usageand assembly errors -Effortless disassembly and reassembly Advantages : -RELIABILITY OF ASSEMBLY -INTEGRATED TOLERANCE COMPENSATION -ALLOWANCE OF COMPACT DESIGNS - HIGH LOAD CAPACITY

Professional installations and disassemblies on your premises The highly-qualified specialist personnel of GW Batterien GmbH would be happy to carry out assemblies, commissionings and also disassemblies – even in difficult conditions such as sites which are difficult to access. The commissioning process involves a complete functional test, a capacity test and further necessary tests. After a disassembly, we will of course dispose of the old battery in the correct manner.

NSPV Plastic hand spanner wrench tool for solar PV connectors Features: Good wear resistance; Assemble and disassemble solar connectors; Light but strong; Easy to operate; Save Labour and time for installation.

NSPV Plastic hand spanner wrench tool for solar PV connectors Features: Good wear resistance; Assemble and disassemble solar connectors; Light but strong; Easy to operate; Save Labour and time for installation.

By choosing Module-T, you're choosing expertise and responsiveness. Our quick bolted method of construction means you can guarantee a stress-free assembly or disassembly in no time at all - the entire operation takes less than two hours! This ease of assembly and disassembly means the units can also be moved easily from one site to another. The units are shipped to you in kit form meaning shipping costs are also minimised. All of this may make you think we have scrimped on quality but you'd be wrong. All of our units are made of 2mm thick, highly galvanised and painted steel and are fully insulated with either Rockwool or polyurethane insulation either 50mm or 100mm thick, meaning they're not only resistant to extreme weather conditions, but they keep you and your staff cool in the summer and warm in the winter.

PU timing belts with easy joint as strong as a welded joint The easy joint timing belt fastener is the perfect solution, for a quick and easy mechanical endless connection of PU timing belts. Assemble without disassembling, without stopping your production line Replace your belts in few minutes without disassemble your hoods, pulleys, axis. Reduce your production downtimes. The method of mechanical assembly and fastening system easy joint offers unique solutions for easy and fast repairs of power transmission belts or conveyor belts. Pitches: H / T10 / AT10 / T20 / AT20 / 8M / 14M Standard: Polyurethane 90° Shore A grey Versions: Standard, PAZ, PAR Cords: reinforced with a Polymercord around the Pin in each tooth joint, arranged in parallel Width: from 10 to 150mm, (wide belts possible on request)

Prefabex PORTABLE SITE OFFICE are specially designed container solutions suitable for relocation enabling repeated number of installations. Flat pack containers can be assembled and disassembled easily and quickly. portable flat pack containers are preferred by large-scale construction companies working intensely due to its high quality and competitive price. Temporary Flat pack homes or offices are mainly built in a factory, with insulated walls and accessories such as kitchens and included. They are then delivered to the site, ready to be grouped together. Our PORTABLE SITE OFFICE allow you to get the building we need exactly for your business. There is a wide range of optional extras and accessories available to customize your unit to meet your exact needs

The secret of success of Flottweg separators is the separator bowl. The compact and robust design of the AC1500 convinces customers worldwide. Since the complete bowl can be assembled and disassembled as one compact component, simple and time-saving maintenance is guaranteed. The spindle of the AC1500 reaches its operating speed within a few seconds and can be flexibly adapted to product requirements through simple and variable speed control. In addition, the AC1500 operates so efficiently that power consumption can be reduced while at the same time decreasing the mechanical load on the system.

Drive-over heavy-duty cable bridge as drive-over protection for cables and hoses in outdoor areas. Ideal for use on construction sites, in the oil and gas industry, in mining as well as in the military and suitable for heavy trucks and forklifts Up to 20 t max load Easy to assemble, disassemble and store With 3 channels Highly visible

0.55 kW Compact externally ventilated single-phase three-phase motor with capacitor, 5 m connection cable included and shock-proof plug. The motor is designed in a way that acid vapours or aggressive atmosphere cannot damage it. Light and convenient Quiet and durable Quick motor assembly/disassembly by Lutz hand wheel

Compact and powerful single phase two-value capacitor motor. Light and convenient Quiet and durable With motor protection switch, connection cable and plug Quick motor assembly/disassembly by Lutz hand wheel Type of drive: Electric Explosion Protection: not explosion-proof

▪ Modular setup with five different available dispenser sizes on each side ▪ Static mixing of two materials with same or different viscosities ▪ Adjustment of the desired mixing ratio by adjusting the speed ratio of both dispensers ▪ Volumetric dosing, regardless of viscosity ▪ For low to high viscosity materials ▪ Particularly suitable for abrasive, filled or shear sensitive materials ▪ Continuous dosing, pulsation free ▪ Interior non-stick coated ▪ Linear relation between dosing volume and rotation speed ▪ Programmable suck-back prevents dripping or stringing of product ▪ Different rotor and stator materials available as standard ▪ Long service life due to application-specific rotor-stator combinations ▪ Easy cleaning and maintenance due to quick assembly and disassembly options ▪ Mixing ratio 1:1 - 100:1 ▪ Volume flow of 0 - 1,300 ml/min (depending on mixing ratio, material and dispenser combination)

▪ Hygienic design for food, cosmetic and pharmaceutical applications ▪ Easy integration into automated processes due to compact design ▪ Length and weight savings compared to existing pumps ▪ Short cycle times ▪ Non-destructive dosing of solid containing materials with diameter of up to 20 mm ▪ Volumetric dosing and filling, regardless of viscosity ▪ For low to high viscosity materials ▪ Long service life even with abrasive and shear sensitive materials ▪ Continuous dosing, pulsation free ▪ Precise filling with high repeatability ▪ Linear relation between dosing volume and rotational speed ▪ Programmable suck-back prevents dripping or stringing of product ▪ FDA compliant elastomers ▪ Wetted components are autoclavable ▪ Stainless steel ▪ Optional flushing connection for optimum results with CIP ▪ Easy cleaning and maintenance due to quick assembly and disassembly options

ViscoTec 1C dispenser vipro-PUMP ▪ Volumetric dispensing, regardless of viscosity ▪ For low to high viscosity materials ▪ Particularly suitable for highly abrasive, filled or shear sensitive materials ▪ Modular scalability of volume flow within the model range ▪ Programmable suck-back prevents dripping or stringing of product ▪ Material entry with Tri-Clamp DN 20 connection for optimized material flow and fast coupling of material supply ▪ Locking ring for easy and fast disassembling of drive unit ▪ Drive unit connection with optimized power transmission free from clearance ▪ Optimized dispenser bracket for easy adjustable mounting ▪ Long lifetime due to low wear ▪ Different rotor and stator materials available ▪ Continuous dosing, pulsation free ▪ Interior non-stick coated ▪ Dividable rotor assembly for easy & fast replacement and low spare part costs ▪ Easy cleaning and maintenance due to quick assembly and disassembly options

What are the main advantages of a flatpack container? Why choose us over another supplier? It’s easy: choosing the services of Module-T means choosing expertise and responsiveness. We offer flatpack prefabricated containers and prefabricated modular buildings at unbeatable prices. In addition to our competitive prices, we guarantee ease of installation and use, thanks to a quick bolted assembly with no welding required. Because of this, your demounted flatpack container can be assembled – and disassembled – in record time. The entire operation takes barely two hours! This also makes it easier to move from one site to another via easy hoisting. All this also allows us to ship our installations disassembled in kit form, thus optimizing transportation costs. Strong and sturdy, our flatpack containers are made of a highly galvanized and painted steel structure with a thickness of 2 mm. Fully insulated, your site container includes Rockwool or polyurethane insulation of 50 to 100mm.

The dispenser based on the ViscoTec endless piston principle is particularly suitable for the filling, dosing or application of viscous, abrasive, highly filled or shear-sensitive materials. There are three different versions of the volumetric dosing system: 3VHD8, 3VHD12 and 2VHD12. Important key data: - Withdrawal option (no dripping or thread pulling) - absolutely linear relationship between rotor speed and spread rate - long service life due to media-specific component selection - quick and easy disassembly/assembly - Sealless, easily dismountable rotor string - process-safe and high-precision filling/dosing - variable quantities infinitely adjustable - compact construction Hygienic features: - Design according to EHEDG guidelines - FDA-compliant design/development - hygienic and pharmaceutical design - Interior with optimised dead space - all surfaces Ra ≤ 0.8 μm - rinsing connection for automatic cleaning