Optical fibre cables - Import export

INDOOR CABLE, METAL-FREE, HALOGEN-FREE, FLAME RETARDANT A very robust indoor cable with 1-2 fibers for indoor installation for direct customer connection with good cross-pressure values. Easy access to fibers.

TIGHT BUFFERED FIBER, SINGLE FIBER, METAL-FREE Suitable for assembling to pigtails or as connecting cable in mechanically protected areas

RAILFOOT CABLE, LOOSE TUBE CONSTRUCTION, METAL-FREE, WATERTIGHT, RODENT PROTECTION, ALUMINIUM-PE-COMPOSITE-LAYER SHEATH, STEEL WIRE ARMOURING The fiber-optic railfoot cable is designed for use in telecommunication systems. It can be laid directly on the rail foot or other areas subjected to vibrations and impacts, but is also suitable for fixed laying in cable ducts, conduits or direct burial.

FIBER OPTIC ENCLOSURES We offer our customers a wide range of enclosures / sleeves and cable storage products. Thanks to our in-house assembly department, we can supply you with the pre-assembled solutions – depending on the customer’s requirements – which considerably reduces the assembly effort on site.

DUPLEX CABLE, FIGURE-0, METAL-FREE, HALOGEN-FREE, FLAME RETARDANT Suitable for assembly into a duplex connection cable between passive and active network components indoors, designed as “figure 0"

DUPLEX CABLE, ZIPCORD FIGURE-8, METAL-FREE, HALOGEN-FREE, FLAME RETARDANT Suitable for assembly into a duplex connection cable between passive and active network components indoors, designed as a "zip-cord"

SIMPLEX CABLE, METAL-FREE, HALOGEN-FREE, FLAME RETARDANT Suitable for assembling to a connecting cable between passive and active network components indoors

LOOSE TUBE CONSTRUCTION, METAL-FREE, LONGITUDINALLY WATERTIGHT Suited for indoor and outdoor use - for Metro, Access or FTTx implementations and and for blowing in into mini pipe systems. This cable has a lower friction coefficient due to the PA-sheath

LOOSE TUBE CONSTRUCTION, METAL-FREE, LONGITUDINALLY WATERTIGHT Suited for indoor and outdoor use - for Metro, Access or FTTx implementations and and for blowing in into mini pipe systems

LOOSE TUBE CONSTRUCTION, LONGITUDINALLY WATERTIGHT, SLIGHT RODENT PROTECTION, HALOGEN-FREE, FLAME RETARDANT Suited for indoor and outdoor use - for fixed laying in cable ducts, conduits or direct burial

LOOSE TUBE CONSTRUCTION, METAL-FREE, LONGITUDINALLY WATERTIGHT, HALOGEN-FREE, FLAME RETARDANT Suited for indoor and outdoor use - for fixed laying in cable ducts, conduits or direct burial

LOOSE TUBE CONSTRUCTION, METAL-FREE, LONGITUDINALLY WATERTIGHT, SLIGHT RODENT PROTECTION, HALOGEN-FREE, FLAME RETARDANT Suited for indoor and outdoor use - for fixed laying in cable ducts, conduits or direct burial

PASSIVE FIBER OPTIC COMPONENTS Cables and components – simply belong together For precisely this reason, we decided many years ago to include passive fiber optic components in our product portfolio in addition to cables. In this segment we produce pre-assembled fiber optic cables (cable pigtails, patch cables and breakout cables) with diverse connector and coupling types (FC / PC, FC / APC, SC / PC, SC / APC, ST, E2000 / PC, E2000 / APC, FDDI, FSMA, LC/PC, LC/APC, MTRJ, LX5, MU, MPO). All work steps of manufacturing and quality inspection are carried out by our highly qualified employees at our fiber optic technology plant in St. Barbara – Wartberg. The working rooms meet all the requirements concerning climatisation and workspace for optimum working conditions.Furthermore, we produce completely assembled 19″ fiber optic patch panels that are used for fiber optic distribution or for the fiber optic termination and storage of fiber optic cables and splice cassettes in 19″ rack systems

BREAKOUTCABLE, METAL-FREE, HALOGEN-FREE, FLAME RETARDANT Breakoutcable for FTTx and data center applications. Suitable for laying on cable trays or cable channels indoors. Can be ordered pre-assembled with connectors.

ALL-DIELECTRIC-SELF-SUPPORTING CABLES Fiber optic cables with this design consist of a central support element and several loose tubes with a maximum of 24 fibers which are stranded around the central support element. For use on overhead lines, these are equipped with extra aramid yarns for strain relief. This enables tensile strengths of up to 50 kN to be achieved.

The rapid expansion of regional and national high-speed data networks is causing an ever increasing demand for fiber optic cables and components. We face this challenge and produce fiber optic cables with single-mode, multimode or NZDS fibers in our fiber optic technology profit center in Sankt Barbara im Mürztal – OT Wartberg, and assemble the cables with the various connector types to meet the highest demands. The range of types covers all usual ground cable constructions in jelly filled and dry-filled design as well as metallic and metal-free (PA) rodent protection. Beyond that also metal-free overhead cables (ADSS) in self-supporting design for spans up to 700m and for 20kV or high voltage systems will be manufactured. With our modern measuring devices, our cables are permanently subjected to tests and controls in accordance with international standards and regulations.

CENTER UNITUBE CONSTRUCTION, METAL-FREE, LONGITUDINALLY WATERTIGHT Suited for outdoor use - for Metro, Access or FTTx implementations and and for blowing in into mini pipe systems

BREAKOUTCABLE, METAL-FREE, SLIGHT RODENT PROTECTION Breakoutcable for FTTx and data center applications with additionally rodent protection. Suitable for laying on cable trays or cable channels indoors and outdoors. Can be ordered pre-assembled with connectors.

MINI-BREAKOUTCABLE, METAL-FREE, HALOGEN-FREE, FLAME RETARDANT Mini-Breakoutcable for FTTx and data center applications. Suitable for laying on cable trays or cable channels indoors. Can be ordered pre-assembled with connectors.

INDOOR/RISER CABLE, METAL-FREE, HALOGEN-FREE, FLAME RETARDANT Robust riser cable for the FTTH area, ideal for vertical laying into existing cable ducts of buildings for example. Upon request, this cable is pre-assembled in practical installation boxes.

LOOSE TUBE CONSTRUCTION, METAL-FREE ADSS (all-dielectric-self-supporting) cable are metal-free air hanging cable, suited for fixing on poles. The pole distance is at 35 kN maximum 700 m.

LOOSE TUBE CONSTRUCTION, METAL-FREE ADSS (all-dielectric-self-supporting) cable are metal-free air hanging cable, suited for fixing on poles. The pole distance is at 16 kN maximum 350 m.

LOOSE TUBE CONSTRUCTION, METAL-FREE ADSS (all-dielectric-self-supporting) cable are metal-free air hanging cable, suited for fixing on poles. The pole distance is at 9 kN maximum 200 m.

LOOSE TUBE CONSTRUCTION, METAL-FREE ADSS (all-dielectric-self-supporting) cable are metal-free air hanging cable, suited for fixing on poles. The pole distance is at 6 kN maximum 100 m

LOOSE TUBE CONSTRUCTION, METAL-FREE ADSS (all-dielectric-self-supporting) cable are metal-free air hanging cable, suited for fixing on poles. The pole distance is at 4 kN maximum 60 m.

LOOSE TUBE CONSTRUCTION, METAL-FREE ADSS (all-dielectric-self-supporting) cable are metal-free air hanging cable, suited for fixing on poles. The pole distance is at 6 kN maximum 100 m.

LOOSE TUBE CONSTRUCTION, METAL-FREE ADSS (all-dielectric-self-supporting) cable are metal-free air hanging cable, suited for fixing on poles. The pole distance is at 4 kN maximum 60 m

LOOSE TUBE CONSTRUCTION, WATERTIGHT, RODENT PROTECTION, HALOGEN-FREE, FLAME RETARDANT Suited for indoor and outdoor use - for fixed laying in cable ducts, conduits or direct burial

CENTER UNITUBE CONSTRUCTION, METAL-FREE, LONGITUDINALLY WATERTIGHT, SLIGHT RODENT PROTECTION, HALOGEN-FREE, FLAME RETARDANT Suited for indoor and outdoor use - for fixed laying in cable ducts, conduits or direct burial