Automatic forming - Import export

Aluminum foil Food Container is a kind of tableware widely used. It is 3 or 8 series of aluminum ingot raw materials, after cold rolling or hot rolling into uniform thickness, smooth surface, no pinhole, no dust particles, no smell of aluminum foil master coil, after special equipment and mold full automatic cold stamping forming production process.

Aluminum foil Food Container is a kind of tableware widely used. It is 3 or 8 series of aluminum ingot raw materials, after cold rolling or hot rolling into uniform thickness, smooth surface, no pinhole, no dust particles, no smell of aluminum foil master coil, after special equipment and mold full automatic cold stamping forming production process.

Combining the erector to a line (taping base, filling floor and taping machine) it is possible to create the boxes as they need, without engaging spaces for accumulation. The trainer will automatically form boxes, taking them from the side stock and by bending the four bottom flaps. The settings relating to boxes, speed size etc .. are all adjustable by a convenient front panel. The operation can be set automatically or manually. Furthermore, by installing the automatic Start/Stop system equipped with a photocell, placed on the taping base, the F2000 trainer waits for the operator to free the taping base from the box, before proceeding with the formation of another box.

The F1000 carton erector is used when a large number of boxes of the same size are to be formed. With the erector it is possible to form the boxes and accumulate them in a specific area of ​​the warehouse, ready for use. By combining the erector with a line (taping base, filling surface and taping machine) it is possible to create the boxes as they are needed, without taking up space for accumulation. The erector automatically forms the boxes by taking them from the side magazine and folding the four lower flaps. The settings regarding box size, speed, etc. are all settable via a convenient front panel. Operation can be set automatically or manually. Furthermore, by installing the automatic Start/Stop system equipped with a photocell, placed on the taping base, the F1000 trainer waits for the operator to free the taping base from the box, before proceeding with the formation of another box.

The SYSTEM-T fully automatic Form-Fill-Seal (FFS) packaging machine combines high quality packaging from a PE tube with high production capacity and is therefore ideal to be used in a wide range of industries including petrochemicals, fertilizers, animal feed, food,... Due to the high flexibility of the FFS packaging machine it can be adapted to different customer requirements. For example, pillow bags and gusset bags can be produced with or without carrying handle and a filling weight between 5kg and 50kg. Additional perforation of the bags is also possible. The SYSTEM-T stands out due to its modern design and a very sturdy and compact construction. Accessibility, generous clearance, long maintenance intervals and low maintenance costs were of major importance in the development of this machine. For example, the large doors offer easy access to all areas and important parts and cable connections are protected from corrosive and aggressive dust by stainless steel housings.

The SYSTEM-F, a fully automatic vertical form-fill-seal packaging machine, produces pillow bags and gusset bags with or without carrying handle and a filling weight between 5 kg and 50 kg from flat film. The System-F is particularly ideal for packaging powdery and moderately free-flowing products. Thanks to an adjustable format set, different package sizes can be produced. The format and/or production can be changed by one person in just a few minutes. This is made possible by a rotating magazine, which is installed directly on the machine and holds several format sets of different sizes ready at all times. The vertical FFS packaging machine impresses with its compact design and low space requirement. Further options allow this bagging machine to be adapted to a wide range of requirements.

Suitable for all types of neutral or printed film (preferably with antistatic treatment) or tubular polyethylene with thickness from 0.06 mm to 0.13 mm or tubular polypropylene with from 0.03 mm to 0.05 mm thick, and cartene normal or high density. Furthermore, with the FP BAG EVO it is also possible to use expanded polyethylene (FOAM) in tubular reel with a maximum thickness of 1.5 mm. It can use reels with a width of 80-300 or 100-500 mm without disassembly of parts or changing settings. The packaging machine automatically perform the forming of the bag with the upper opening. The filling of the bag and the subsequent closing can be done manually by an operator who starts the cycle of the machine through a button, or automatically by means of feeders, manipulators, weighers. The reel change takes a maximum of thirty seconds. The machine cycle time for the preparation of a bag 200 mm long is about four seconds.

The product is manufactured using solid color elastane fabric and automatic metal mechanism. You can use the product on your braided hair, braided hair, and bun hair. It is recommended to use it by keeping away from perfume, cream, water and liquid chemicals. It requires delicate use. Product Dimension Information: 16 cm width, 28 cm length. Returns and exchanges are valid for unused and unopened products. Made in Turkey.

Ming Xiao Mfg has a friend factory working on wire forming production of all kinds of spring manufacturers, pressure spring, tension spring, torsion spring, clamp spring, shrapnel, special-shaped spring, stainless steel spring, metal spring, tower spring.... There are square steel, flat steel, various stainless steel and tin bronze spring and so on. The wire formed parts as belows: Large spring bending Shaped spring Compression spring Linear spring Hardware hook Torsion spring series Tensile spring Buckle retaining ring Clockwork coil roll Custom Springs Production equipment: computer spring forming machine, automatic spring coiling machine of various specifications, advanced double end spring grinding machine and torsion spring machine of various specifications, etc.

Keep Your Steam Clean, Safe And Energy-Efficient Steam is an essential resource is many industrial processes. As a result most facilities have a vast network of piping, valves, flanges and steam traps. Within these systems there exists constant flow and turbulence. As pure steam travels from your boilers to their point of use, some cooling is inevitable. The result is accumulated condensate and gases. Steam traps purge this waste and keep your system pure. A fully-functional steam trap opens, closes or modulates automatically. It discharges condensate once formed, unless the heat from the condensate can be used. It is energy-efficient and does not waste quality steam. It removes impurities from the live steam, and maintains purity and efficiency throughout the system. Steam Trap Failure Causes Losses to Product Quality, Safety and Energy Loss Steam traps are necessary for the overall efficiency of heat energy transfer.

The basic concept of this system is to label form bottles on both sides without using format parts. The adaptation to the respective product takes place by simple adjustment of the machine components. The associated advantages are short set-up times, high availability and multiple use in different production lines. For a high placement accuracy of the labels, the products are precisely aligned on the transport path. Label formats up to 250mm height and cycle rates up to 250 labels per minute are possible. This makes it easy to cover a wide range of products. FM | Form bottles one- oder two-sided | up to 250 products/min FM-DS | Form bottles und cylindrical products (rotating station) | up to 60 products/min FM-RB | Form bottles und cylindrical products (rotation belt) | up to 250 products/min FM-DSRB | Form bottles und cylindrical products | up to250 products/min | (combination of rotating station und rotation belt)

Thanks to the TNC-F model series, semi-automatic labelling of shaped bottles becomes very easy. The front and back labels should be on a carrier material. The product is inserted into a product pickup device. As soon as the 2-hand operation is activated, the system starts to pick up the product in the two format pucks, rotates and aligns the product before the front and back labels are applied exactly to the desired positions. By exchanging the format parts of the product pick-up device, cylindrical or angular products can also be processed and labelled with several labels in addition to the shaped bottles.

Their flexibility and high performance make BEHRINGER tabletop machines the ideal solution for the medium ton range. The table moves the weight BEHRINGER tabletop machines are ideal for use in forges, rolling mills and die casting factories, in steel finishing works and for tool and mold making. Their individually traversable material clamping vices and blade guide arms make these ideal for cutting bulky materials. The low table height makes this type of machine ideally suited for use on normal hall floor level. BEHRINGER tabletop machines are supplied as standard in semi-automatic form. Automation is possible by upgrading with an additional material clamping vice at the end of the table. Positioning takes place on an axiscontrolled basis. Optionally available is 90° rotatable blade guide for vertical and horizontal sawing to allow notching of materials.

ANDRITZ Kaiser is among the most experienced suppliers of presses and automation for sheet metal forming on the market. High precision, long lifetime of machine and tool, and low maintenance costs speak for the quality of our machines. ANDRITZ Kaiser produces customized solutions for every application – from the stand-alone press or roll feeder to complete production lines with coil handling equipment, finished part handling, scrap handling, and automation system. With over 8,000 automatic punching and metal forming presses worldwide, our customers produce high-quality formed and punched products. Our sheet metal forming solutions find applications in the automotive (OEMs and suppliers), white goods, electronics, electromotor lamination, construction, and consumer goods industries. Numerous well-known companies place their trust in our equipment. Our range of products Complete production lines for blank cutting, electromotor lamination, or conventional stamping Automatic...

Ridat Semi Automatic (SA) Vacuum Forming Machines offer, as standard high specifications, consistent production and a wide range of standard models and readiness to respond to requests for bespoke specifications. Fully automatic moulding processing sequences with manual placement of thermoformable sheet and removal of the vacuum formed product. Key machine features include: Ceramic heaters with multi-zone heater control for balanced heat Power assisted and timer controlled heater box movement Hinged clamp frame - powered by two air cylinders Mould chamber fully sealed to maintain vacuum pressure High capacity vacuum reservoir and pump for instant vacuum supply Microprocessor Controls and HMI Display CE Mark

Ridat’s Automatic Vacuum Forming Machine range with Double Heater (AVF) is designed for consistent production of all commonly used thermoformable material of up to 12 mm thickness. Robust construction with an automatic vacuum forming cycle and user-friendly touch screen control of all processing features. Key machine features include: Top and bottom heaters ensure balanced heat distribution with minimal material stress. The dual ceramic heaters also enable a variety of material sheet types (such as PVC, PP, PS, APET, GPET, HDPE, ABS) to be vacuum formed. Clamp frame and mould table are both raised by four cylinders and guided by rack and pinion mechanism for smooth and parallel movement Fully sealed mould chamber to maintain vacuum pressure and facilitate pre-blow and bubble Photo electric sensor to control sheet sag and bubble height High capacity vacuum reservoir and pump for instant vacuum supply High velocity turbo fans to cool the vacuum formed sheets CE Mark

The machine consists of three parts. These; uncoiler, machine, conveyor. Conveyor and uncoiler are included in the machine. Uncoiler 1000 kg. There are two types of uncoilers, with motor and without motor. The machine is produced using 4140 steel molds with 50x56 rocwell hardness. The machine consists of guillotine cutting. Automation system language options; Turkish, English and French. An optional language can be added. The number of stations is 12. However, the number of stations can be changed according to demand. It produces 20-25 meters per minute.