Bagging machines - Import export

The TEC 20 form, fill and seal machine enables the production of bags made of polyethylene film from a flat film roll. The film can be neutral or coloured, with continuous printing or centred printing with print mark. The design of the machine and the low loading height allow ergonomic adaptation to a manual feeding station or easy connection to a feeding unit, such as an automatic counter, an automatic weighing system, an automatic assembly machine, an injection moulding machine, a conveyor belt or similar.

The TEC 06 form fill and seal machine uses standard polyethylene, biodegradable oxo sleeves or biodegradable sleeves (starch-based). The TEC 06 is particularly suitable for the production of display bags. The sealing head simultaneously performs the top seal of the pouch and the bottom seal of the next pouch, a cut is made between the two welds, and at the same time a pre-cut is made across one thickness of the sleeve to form a "kangaroo pocket" that allows the pouch to be filled. As this pocket is firmly connected to the spool, slippage is not possible, so that the weld seams subsequently run perfectly parallel. Due to the functionality and quality of its equipment, the TEC 06 is a very reliable machine that consumes few wearing parts.

Bag filling with the BEHN + BATES impeller packer is achieving best filling results due to low-air filling and high filling pressure

The TEC 55 was developed to meet the demand for high throughput rates. Flexibility, easy maintenance, simple settings, synchronisation with the infeed systems, flexibility and quiet operation were the priorities in the development of this machine. The machine achieves an output of up to 80 bags / minute. The most common options and accessories: - Hanger hole - Precutter for easy opening - Jogger to level the products before closing the bag - Bag identification system: - Marking by transfer to the film - Label printer - Inkjet printer - Flap for heavy products - Cell for pre-printed film - Drive by suction belts - Synchronisation with: - Multihead weigher - Auger filler - Cup doser - All other machines - Suction plate for changing the film roll

Standard elements : - Robust frame in grey or white lacquered steel - Conformator tube - Welding jaw with heating rod (hard chrome plated) with constant temperature controlled by temperature controllers with digital display - Drive of the film by belt - Motorisation of the unwinding of the roll - Control generated by SPS - Touch screen display - Programme memory (weight, length of bags...) - Fine detection of the reel - Translucent mapping Material according to current EC standards. Films that can be used: polypropylene, composite, aluminium, barrier, polyethylene.

Tecnimodern's slanted or vertical form fill and seal machines with very low loading height allow the production of polyethylene or polypropylene film bags from a flat film roll. The film can be neutral or coloured, with continuous printing or centred with print mark. These TEC30 packaging machines have the advantage that they can be equipped with either a thermal sealing system for heat-sealed films or an impulse sealing system for polyethylene films, depending on requirements. To meet the need for all types of packaging, feeding and product shapes, we offer various automatic feeding systems, such as: - Counting with vibrating or centrifugal trays - Weighing with linear scales - Dosing by augers or volumetric feeders

Bagging automation is a game-changer for businesses dealing with bulk or diverse products. With its efficiency, accuracy, and versatility, it offers a streamlined solution to the challenges of storing, sorting, and packaging products. By implementing bagging automation, businesses can improve productivity, reduce errors, and ultimately enhance the overall customer experience through efficient and organized shipping. Bulk or a variety of products need to be stored and separated in order to make an organized shipping. Bagging automation is the solution to that problem with its efficiency and a small margin of error. Contact with us for our customized solutions to your bagging automation needs.

The Bagging Machine for Tuna Loins is designed for the semi-automatic insertion of cooked and clean tuna loins into bags, streamlining the preparation process for subsequent freezing. Capable of handling 7 kg bags at a rate of up to 8 bags per minute and 10 kg bags at up to 6 bags per minute, this machine requires 4-5 operators for optimal performance. Constructed from durable and hygienic stainless steel AISI 316-304, it ensures longevity and compliance with food safety standards. The volumetric filling system guarantees great uniformity in the volume of bags filled, without producing pieces or flakes, enhancing product quality. Its design facilitates easy cleaning, as it can be fully disassembled, allowing all parts to be accessible. Additionally, the machine offers the flexibility to work with several bag sizes by simply modifying the length, accommodating various packaging needs. This bagging machine represents a significant efficiency

Open-mouth bag filling machine DWS-301-50-1 is intended for packing of free-flowing materials in open-mouth bags. By means of the bag packing machine SWEDA DWS-301-50-1 it is possible to pack up in sewing (open) bags (paper, polypropylene, jute) free-flowing products, including food. Long-term operating experience of bag filling machine SWEDA DWS-301 for packing of sugar, grains, seeds, cereals, granulated powders, pellets and other free-flowing substances and materials has confirmed it’s high accuracy and reliability. Features: - High capacity (up to 400 bags/hour) and batching accuracy (class 0.2); - Stainless steel tract with dust cover; - Work 24/7; - Possibility of communication with the automated control system of the enterprise and the owner’s office; - Easy to operate, without difficult settings and menus; - There are no special requirements for operating conditions and staff; - Operational mounting, adjustment and put into operation.

The band transport conveyor GKS has a large capacity for bags supply at a high speed bag closer sewing head. This conveyor is part of an automatic line suitable for agriculture sectors where bags packaging and storage are also requested. Whenever such conveyor is working, bring the effortless of operators, while productivity level become higher and packaging cost are decreased. Characteristics : Band length :2,0 - 4,0 m. Band wide :400 mm. Transport speed :6,7 - 22 m/min. Transport capacity :20 - 100 tone/h. Tension :380 V. Motor power :0,55 Kw. Price : from 650 Euroas to the band's length requested.

Portable bag closer sewing machine Model : GK26-1A Brand Keestar (CN) Sewing type :chain stitch Sewing step : 6,5 mm Sewing speed : 1450 spm Tension 220V/50Hz Weight 5,6 Kg Cutting the chain : automatic

The SYSTEM-F, a fully automatic vertical form-fill-seal packaging machine, produces pillow bags and gusset bags with or without carrying handle and a filling weight between 5 kg and 50 kg from flat film. The System-F is particularly ideal for packaging powdery and moderately free-flowing products. Thanks to an adjustable format set, different package sizes can be produced. The format and/or production can be changed by one person in just a few minutes. This is made possible by a rotating magazine, which is installed directly on the machine and holds several format sets of different sizes ready at all times. The vertical FFS packaging machine impresses with its compact design and low space requirement. Further options allow this bagging machine to be adapted to a wide range of requirements.

Suitable for all types of neutral or printed film (preferably with antistatic treatment) or tubular polyethylene with thickness from 0.06 mm to 0.13 mm or tubular polypropylene with from 0.03 mm to 0.05 mm thick, and cartene normal or high density. Furthermore, with the FP BAG EVO it is also possible to use expanded polyethylene (FOAM) in tubular reel with a maximum thickness of 1.5 mm. It can use reels with a width of 80-300 or 100-500 mm without disassembly of parts or changing settings. The packaging machine automatically perform the forming of the bag with the upper opening. The filling of the bag and the subsequent closing can be done manually by an operator who starts the cycle of the machine through a button, or automatically by means of feeders, manipulators, weighers. The reel change takes a maximum of thirty seconds. The machine cycle time for the preparation of a bag 200 mm long is about four seconds.

The PANDYNO FPPD vertical inserters allow to an operator to fill and seal the packs avoiding the use of preformed bags. The operator must in fact insert the product to be packaged in the magazine tube, on which a few meters of tubular film have been previously loaded. The product goes down into the tubular film up to the support surface. The operator manually closes the sealing bar by applying a slight pressure on the bar. The welding machine in a single operation carries out the welding of the package, the cutting of the film and the welding of the bottom of the next envelope. This operation takes place using an electromagnetic blocking device. By equipping the bagging machine with several loaders, it is possible to increase the productivity of the machine. To avoid waiting times it is also possible to pre-load different magazine tubes so that they can be quickly replaced once the film is finished. The standard model can be placed on a bench and comes with a charger of your choice.

The electric sewing machines for bags series FPGK are reliable and economical. Recommended for production up to about 400 to 500 bags per day, can be easily handled and transported to various sewing locations. Simple and compact, are equipped with a structure in aluminum alloy and plastic of high quality and mechanical parts in steel. Staplers are suitable to close sacks made of jute, paper, fabric, plastic and network for sewing fabrics, nets for agriculture, cartons, etc. The material you can sew, if different from those listed must be low density (to avoid breaking of the needles). The standard model comes with 220 Volt and is equipped with kits transformer 12V / 220V, backpack, batteries and chargers. The transformer 12 volt / 220 volt is oversized and equipped with all the safety measures necessary to the safe operation and long-lasting equipment. Safety devices include: battery alarm, battery low shutdown, overload and overheating. The backpack allows you to move comfortably.

The sealer mod. DZ 800 W is a multifunctional machine for of large dimensions. Without limitation caused by the size of vacuum chamber, this horizontal vacuum packaging machine has very wide application range. Built in stainless steel. The vacuum pump 20 m³/h allows for high production. The sealing bar (or the sealing bars depending on the model chosen) with width 10 mm and closing with compressed air ensures a perfect seal on any type of material also very thick. The intake system with nozzles allows the use of any type of smooth or embossed envelope (NO BELLOW). The closure of the bars is through a dual button command (dual control security). When you have to pack flours or products that could make some dust, it is absolutely recommended to install the dust filter to avoid damaging the vacuum pump (main part of the machine) Similarly, we recommend installing the filter for liquids when you need to vacuum-pack products such as sauces or tomato purée.

Sealer machine with quick closing lever for sealing bags in plastic material heat-sealable, with impulse sealing (resistance heats in a few seconds) and timer for adjustment. The welding cycle is indicated by an indicator light. The double sealing bar (top and bottom) with welding of 10 mm allows the closing of envelopes with high thickness, coupled bags and bellows. Through a selector switch, you can choose whether to use one or two welds. The maximum thickness of weld is 0.25 mm x 4 (total 1 mm).

The CERTOPAC, a fully automatic high-performance bagging machine, packs any type of free-flowing bulk material in pillow bags and gusset bags with a filling weight between 5 kg and 80 kg. Thanks to its high speed, this open-mouth bagging machine can fill up to 1500 bags per hour. Because of the high flexibility of the packaging machine, bags made of woven PP, PE and paper can be processed. Furthermore, the CERTOPAC stands out due to its easy accessibility and high reliability. This high-performance packaging machine is also available as CERTOPAC-S and CERTOPAC-L in addition to the “standard version”. The differences between the variants are the bag magazines (rotating bag magazine or push magazine), the different filling weights and sizes of the bags. Furthermore, the CERTOPAC can also be completely made of stainless steel and equipped for powdery products.

As the name suggests, the FFS-Combi Version of the open-mouth bagging machines has an additional FFS module, allowing bags not only to be used from the bag magazine but also to be produced from tubular film. The CERTOPAC and PRINCIPAC open-mouth bagging machines are available as FFS-Combi Versions. The additional FFS module is also available for the CIRCUPAC bagging carousel. The changeover from the bag magazine to the production of bags from the tubular film is simple and convenient on the operating panel. The filling process is identical for both variants. The bags are either separated from the bag magazine or produced from tubular film and conveyed to the pick-up station. There the bag is put onto the filling spout, filled, and placed on the conveyor belt. From there it is transported to the bag closing machine, which sews, seals, or glues the bag depending on the material.

The Twin Version of the open-mouth bagging machine combines two bag placers and two filling stations in one machine. Two STATEC BINDER high-performance net weighers ensure that the product is precisely dosed and weighed. When the required weight is reached, the weigh hopper opens and the product flows into the attached bag at the filling spout. A high-performance bag closing machine enables fast sewing, sealing, or gluing of the bags. The high performance of the Twin Version is achieved by always separating two bags simultaneously, transporting them to the pick-up station, fixing them onto the filling spout, filling them, and placing them on the conveyor belt. The bags are then transported one after the other to the bag closing machine. For example, the PRINCIPAC-Twin can handle up to 2400 bags per hour with a filling weight between 10 kg and 50 kg.

The SYSTEM-T fully automatic Form-Fill-Seal (FFS) packaging machine combines high quality packaging from a PE tube with high production capacity and is therefore ideal to be used in a wide range of industries including petrochemicals, fertilizers, animal feed, food,... Due to the high flexibility of the FFS packaging machine it can be adapted to different customer requirements. For example, pillow bags and gusset bags can be produced with or without carrying handle and a filling weight between 5kg and 50kg. Additional perforation of the bags is also possible. The SYSTEM-T stands out due to its modern design and a very sturdy and compact construction. Accessibility, generous clearance, long maintenance intervals and low maintenance costs were of major importance in the development of this machine. For example, the large doors offer easy access to all areas and important parts and cable connections are protected from corrosive and aggressive dust by stainless steel housings.

Our product portfolio includes three manual bagging machines for open-mouth bags: SCALPAC-G, SCALPAC-B, SCALPAC-S. All three bagging systems are designed for up to 1200 bags per hour and differ only in the used net weighers. Depending on the product to be filled, a net weigher with gravity, belt or screw feeding is used. Prefabricated open-mouth bags made of woven PP, PE or paper are attached to the filling clamp and fixed by an employee. As soon as the bag is fixed, the weighed product flows into the bag. A conveyor belt transports the filled bag to a bag closing machine, which sews, seals or hot-glues the bag depending on the material. For free-flowing bulk materials, a net weigher with gravity feeding is selected. Moderately flowing products are fed via a belt feeder. For fine and powdery products, the screw feeder is best suited.

The ACROPAC is a fully automatic bagging machine with a production capacity of up to 600 bags per hour. Hence, this open-mouth bagging machine is ideal for those who want to change from manual/semi-automatic packaging to fully automatic packaging and/or require low capacity. Whether plastic pellets, animal feed, fertilizer or food, the ACROPAC is ideal for packaging free-flowing bulk materials. Due to the high flexibility of the machines, pillow bags and gusset bags with a filling weight between 10 kg and 50 kg can be filled. The bags can be made of woven PP, PE or paper. In order to meet special requirements, the machine is also available in a stainless steel execution and can be equipped for powdery products.

SEALING MACHINE/BAGGING MACHINE MOD. SUPER - FOR MASSIVE PRODUCTS Machine consists of a loading tube on which a tubular film with a width of 50 cm is fitted. and a manually operated sealing bar. The loading tube is slightly inclined and facilitates the sliding of the product inside the film, without causing sudden falls. By lowering the sealing bar a perfectly sealed bag is obtained and at the same time the bottom of the next bag is created, a hot cutting system separates the two packages. The SUPER bagging machine can be positioned at the entrance barriers of hypermarkets, supermarkets, shopping centers, to reduce theft, small objects but it is also widely used for packaging technical items, clothing, linen, etc.