Bearing metals - Import export

igubal® rod end bearing, female thread With female thread in metric and inch dimensions igubal® rod end bearing, female thread igubal® rod end bearing, male thread With male thread in metric and inch dimensions igubal® rod end bearing, male thread igubal® rod end bearing CL For simplified mounting, with inner and outer threads in metric dimensions igubal® rod end bearing CL igubal® rod End Bearing CL DT For simplified installation, detectable with female thread in metric dimensions igubal® rod End Bearing CL DT igubal® fitting screw, mm Fitting screw with circlip igubal® fitting screw, mm When to use it? When you want to save weight When rotating, oscillating and linear movements should be implemented When high-frequency oscillations/vibrations predominate When a low-noise operation is desired When an electrically insulating part is required When freedom from corrosion is desired For combinations with pneumatic cylinders and gas struts When chemical resistance is required When high stiffening is required When not to use? When you have temperatures above +80°C (then HT options) When rotation speeds in excess of 0.5 m/s should be implemented When very high tensile and lateral loads prevail When applications should be implemented with hydraulic cylinder When dimensions over 30 mm are needed igubal® rod end bearing, female thread With female thread in metric and inch dimensions igubal® rod end bearing, female thread igubal® rod end bearing, male thread With male thread in metric and inch dimensions igubal® rod end bearing, male thread igubal® rod end bearing CL For simplified mounting, with inner and outer threads in metric dimensions igubal® rod end bearing CL igubal® rod End Bearing CL DT For simplified installation, detectable with female thread in metric dimensions igubal® rod End Bearing CL DT igubal® fitting screw, mm Fitting screw with circlip igubal® fitting screw, mm Special properties of the igubal® rod end bearings Maintenance-free, self lubricating High stiffening Very high fatigue strength in varying loads Compensation for alignment errors Compensation of edge loads Insensitive to dirt, dust and lint balls Resistant to corrosion and chemicals High dampening qualities Suitable for rotary, oscillating and linear movements Very low weight Dimensional series K and E, dimensions according to DIN ISO 12240 Version with metal sleeve in the spherical ball for enhanced torque Tolerances igubal rod end bearings can be used, according to the application, with different tolerances. They are designed with a large clearance in the standard product, which enables a secure operation even under high peripheral speeds. The bore of the inner ring has a tolerance according to E10. The shafts should have a tolerance between h6 and h9. Please contact us in case you require lower or more bearing tolerances. Loads igubal® rod end bearings take high forces in normal ambient temperatures, have excellent dampening properties and weigh only a fifth of the conventional metallic bearing housing. In particular cases the load carrying capacity of the rod end bearings should be checked in a practical trial especially with high constant loads and at higher temperatures. Coefficients of surface friction and speeds Rotary motions of the mounted shaft take place directly in the bearing ball made of iglidur® W300. The advantage of this plastic/steel plain bearing is that high speeds can be achieved in dry operation. Taking the radial loads into account, maximum surface speeds up to 0.5 m/s rotating can be attained. The maintenance-free igubal® rod end bearings casually permit linear and oscillating movements of the shaft. Delivery program igubal® rod end bearings are available in the dimensional series K and E for shaft diameters of 2 to 30 mm in all dimensions according to DIN ISO 12240, and of course respectively in the Form A - with male thread and Form B - with female thread The dimensional series K and partly E are moreover available in inch dimensions and – as special version – with a stainless steel sleeve in the spherical ball. Thereby an essentially higher tightening torque is possible than with the plastic spherical ball. Please ask us for other sizes. igubal® rod end bearings - Applications igubal® rod end bearings - Applications Temperatures Dimensional series K in A+B variants for temperatures upt to +200°C (HAT material).

low friction bearing

Powder Metal Bearings

Anti-Friction Plain Bearings, self-lubricating

low friction bearing

grease lubricated

Hydrodynamic Composite Bearing

Hydrodynamic Composite Bearing

grease lubricated

grease lubricated

Hydrodynamic Composite Bearing

Bronze backed PTFE plain bearing

low friction bearing

Material Schulz Stanztechnik manufacturers these axial ball bearings using the materials suited to the specific application. For the housing, steel, brass or stainless steel are used; for rings, steel or stainless steel which is always hardened. The balls are made of chrome or stainless steel, which is also always hardened. All material combinations – depending on their conditions of use – are possible for the assembly of the individual parts. Various surface coats for the individual parts can be supplied as well as finished bearings: brass which is uncoated or nickel plated; steel and stainless steel which is uncoated, zinc plated or nickel plated. All bearings are available lubricated or unlubricated. Structure DLG100 axial ball bearings consist of sheet metal housing, two hardened rings as well as hardened precision balls. Due to their structure, we refer to them as an encapsulated, full ball design.

low friction bearing

Bronze backed PTFE plain bearing

Bronze backed PTFE plain bearing

Anti-Friction Plain Bearings, self-lubricating

Anti-Friction Plain Bearings, self-lubricating

Anti-Friction Plain Bearings, self-lubricating

grease lubricated

self-lubricating

Anti-Friction Plain Bearings

Anti-Friction Plain Bearings

Bronze backed PTFE plain bearing

The CR3 / CR3-5 industrial pallet with integrated reinforcement profiles is an all-rounder in the heavy-duty category – whether it is used in high racking or on automated conveyor technology. Thanks to its robust design and versatility, the CR heavy-duty pallet is proven both as a pooling pallet and in internal logistics in many different sectors. Without steel profiles, the 3-runner CR3 and the five-runner CR3-5 are ideal for applications where the extreme load-bearing capacity of the metal-reinforced version is not needed, but where high performance is essential. Characteristics: Available with 3 (CR3) or 5 runners (CR3-5) High load-bearing capacity for heavy-duty applications Dimensionally stable with first-class bending parameters Chamfered edges on both sides of all runners Palgrip® anti-slip strips on the top deck Options: Corrosion-protected reinforcement profiles, for a load-bearing capacity of up to 1,400kg in high rack Rims: without, 5mm, 22mm RFID transponder

The CR1 Euro pallet is optionally available with or without reinforcement profiles. With profiles, it is the perfect solution for complex tasks and therefore firmly established as multi-use pallet, especially in pooling. The sturdy CR1 heavy-duty pallet has proven its worth in internal logistics processes of numerous industries, including automation, metal processing, machine construction and tool making. Without steel profiles, the CR1 is ideal for applications where the extreme load-bearing capacity of the metal-reinforced version is not needed. Characteristics: Available with 3 runners Very high load-bearing capacity Dimensionally stable with first-class bending parameters, ideal for roller conveyors and automated high rack warehouses Chamfered edges on both sides of all runners Palgrip® anti-slip strips on the top deck Options: Corrosion-protected reinforcement profiles, for a load-bearing capacity of up to 1,750kg in high rack Rims: without, 7mm RFID transponder

Can be used with different bearing housing materials, e.g. aluminium, magnesium and plastic Feasible for a larger variety of bearing housing dimensions, from thin metal sheet housings up to multiple and sectional longer housing areas Reduced total system costs with increased bearing housing tolerances, even stamped or laser burned housings are suitable Manual and automated installation possible

ERC Throttle/Butterfly Valve Cleaning Spray breaks down stubborn impurities in the carburettor system and prevents major repairs. THE EFFECT Deposits and impurities in the intake and throttle valve area impair the function of the carburettor system and increase the risk of corrosion and expensive repairs. THE ADVANTAGES AT A GLANCE - Removes soiling in the intake and throttle valve area - Cleans grease, dirt, and oil residue, as well as rubber abrasion off of metal surfaces - Can be used on (carburettor) linkages, cable wire passages and metal bearings