Road transport - tankers - Import export

Capacity between 15000 and 85000 litres (net capacity) 2- or 3-axle chassis. Any commercial chassis brand. Single to 3-axle semi-trailer, depending on tank capacity. For JET FUEL. Other fuel type and additives on request. Air-side only or both air- and road-side, depending on tank capacity. Civil or military Various meter options (Alfons Haar, Liquid Controls, SATAM, ISOIL, …) Various filtration options (Faudi Aviation, Parker-Velcon, Facet Filtration Group) Lift platform with one or two deck hoses, riser hose or deck pantograph. Standard height (3,30m), low-profile (2,80m) or ultra-low-profile (2,60m)

2-, 3- or 4-axle chassis. Depending on execution. Any commercial chassis brand. For JET FUEL or AVGAS. Other fuel type and additives on request. Air-side only or both air- and road-side, depending on tank capacity. Option: Off-road execution, additivation, upgraded EMC resistance, … Various meter options (Alfons Haar, Liquid Controls, SATAM, ISOIL, …) Various military filtration options (Faudi Aviation, Parker-Velcon, Facet Filtration Group) Lift platform with one or two deck hoses, riser hose or deck pantograph. Standard height (3,30m) or low-profile (2,80m) Additional fucntionalities conform STANAG standards.

Capacity between 5000 and 40000 litre (net capacity) 2- or 3-axle chassis. Designed and built in-house. For JET FUEL or AVGAS. Other fuel types and additives on request. Air-side only or both air- and road-side, depending on tank capacity. Civil or military. Standard height (3,30m) or low-profile (2,80m) Various options on drawbar connections. 3 inch or 4 inch connecting hose with bowser.

Dry product vacuum loaders This unit can only be used to suck dry materials. A vacuum installation up to 9000m³/h with cyclone and fine filter protection is fitted to obtain this. A dry product vacuum loader is also available with a self lifting system (Hi Lift VAC) to unload the material in big bag, high containers or other recipients. An example is shown in the image below. The complete unit is mounted on a skid which can be lifted by a hook lift system on the truck (rigids only). All is driven by a stationary ICE or hydraulically from the truck engine. These units are used on bulk sites where large amounts of dry bulk materials are stowed (e.g. coals, sand, …). Sprinklers keep the surfaces wet so the generated dust is kept under control. The unit has a spraying monitor which sprays water in all directions. With or without a spraying bar on the lower part of the truck to spray road surfaces. These units are available both as rigid or semi-trailer.

Capacities from 10.000 L to 24.000L. Steel grade cylindrical-shaped tank. light-weight construction with self-supporting tank. Lowered centre of gravity and dished ends front and back. Construction according the latest ADR regulations class 3 fuel transport.

Capacities from 25.000 L to 40.000L. Aluminium tank (various shapes available). light-weight construction with self-supporting tank. Lowered centre of gravity and dished ends front and back. Construction according the latest ADR regulations class 3 fuel transport. Tank made in aluminium 5182 according DIN standard. Tank is divided in 2 to 5 compartments.

Capacities from 10.000 L to 24.000L. Aluminium tank (various shapes available) light-weight construction with self-supporting tank. Lowered centre of gravity and dished ends front and back. Construction according the latest ADR regulations class 3 fuel transport. Tank made in aluminium 5182 according DIN standard. Tank is divided in 2 to 5 compartments.

Capacities from 10.000 L to 24.000L. Aluminium tank (various shapes available). light-weight construction with self-supporting tank. Lowered centre of gravity and dished ends front and back. Construction according the latest ADR regulations class 3 fuel transport. Tank made in aluminium 5182 according DIN standard. Tank is divided in 2 to 5 compartments

Capacities from 10.000 L to 40.000L. Steel cylinderical-shaped tank. light-weight construction with self-supporting tank. Lowered centre of gravity and dished ends front and back. Construction according the latest ADR regulations class 3 fuel transport.

Vacuum and deep-vacuum units This unit uses a vacuum pump to create a near-full vacuum in the tank. Suction hoses can be connected to the tank to suck wet materials. Deep-vacuum units use two vacuum pumps. Combi units This unit features two functionalities such as a high-pressure and a vacuum installation. It uses a high-pressure pump to clean dirt and debris from surfaces. And it has a vacuum pump which creates a near-full vacuum inside the residue tank to suck wet materials. Combi ‘HP’ units This unit features two functionalities such as a high-pressure and a vacuum installation. It uses a high-pressure pump to clean dirt and debries from surfaces. Pressures of 1000 bar or above can be reached. And it has a vacuum pump which creates near-full vacuum of the residue tank to suck wet materials. Combi sewer units This unit features two functionalities such as a high-pressure and a vacuum installation. It uses a high-pressure pump with high flow rate to clean out dirt, sand, sludge

This unit uses a vacuum pump to create a near-full vacuum in the tank. Suction hoses can be connected to the tank to suck wet materials. The tank is mounted on a tipping home-made semi-trailer chassis. The whole assembly is driven by the tractor. This unit features two functionalities such as a high-pressure and a vacuum installation. It uses a high-pressure pump to clean dirt and debris from surfaces. And it has a vacuum pump which creates a near-full vacuum inside the residue tank to suck wet materials. The tank is mounted on a tipping home-made semi-trailer chassis. The whole assembly is driven by the tractor. This can be a semi vac-unit or semi combi unit with the ICE mounted on the semi-trailer. On this way you have independent self-driven installation mounted on a semi-trailer. Unit with self-supporting vacuum unit (transport semi-trailer) This is a non-tipping vacuum semi-trailer with vacuum installation on the tractor or on the semi-trailer.

Capacities from 600 L to 1.500 L Stainless steel or aluminium round shaped tank. Non-ADR construction Available for various chassis (e.g. FUSO, Ford Ranger, Toyota Hilux and other)

Capacity between 5000 and 25000 litres (net capacity) 2-, 3- or 4-axle chassis. Any commercial chassis brand. For JET FUEL or AVGAS. Other fuel type and additives on request. Air-side only or both air- and road-side, depending on tank capacity. Civil or military Various meter options (Alfons Haar, Liquid Controls, SATAM, ISOIL, …) Various filtration options (Faudi Aviation, Parker-Velcon, Facet Filtration Group) Lift platform with one or two deck hoses, riser hose or deck pantograph. Standard height (3,30m) or low-profile (2,80m)

Capacity between 5000 and 20000 litres (net capacity) 2-, 3- or 4-axle chassis. Any commercial chassis brand. For JET FUEL and water. Other fuel types and additives on request. Air-side only. Civil Various meter options (Alfons Haar, Liquid Controls, SATAM, ISOIL, …) Only cleaner or combination cleaner/flusher with hydrant intake line. Optional low-point flushing hose reel, water jetting hose and air hose. Optional vacuum tank with vacuum hose. Optional hydraulic crane for lifting hydrant pit valves and covers. Optional fuel pump for recirculation and unloading of the fuel tank.

With more than 160 years of experience in transport, we’re the ideal partner when it comes to road transport. We offer a regular service to and from the main European cities, Russia, CIS countries, Turkey and Iran. We have our own offices in Moscow and 30 branches in a further 10 European countries: Italy, United Kingdom, Ireland, Germany, Spain, France, Belgium, Romania, Poland and Turkey. Our vehicle fleet comprises 180 tractors and 800 trailers and includes Huckepack, megatrailer, tarpaulin, box and container units. Discover the weekly departures calendar from our European branches.