Bottle sterilization machines - Import export

Sterilization machines are used in food products. It is the process that is done before the products go into the packaging of the bottle. There are several models. Sterilization with the steam system Sterilization with hydrogen peroxide. Sterilization with UV lamp 7-8 bar air pressure is used in the systems. Control system is made by plc. Operating voltage 220 volts 50 hz Control voltage 24 volt dc The system is designed according to the bottle or box of the product. 10 inch 7 inch or 4.3 inch hmi screens are used It is guaranteed for 2 years against factory faults.

The vial filling production line is composed of ultrasonic bottle washing machine, dryer sterilizer, filling stoppering machine, and capping machine. It can complete spraying water, ultrasonic cleaning, flushing of inner and outer wall of bottle, preheating, drying and sterilization, heat source removing, cooling, bottle unscrambling, (nitrogen pre-filling), filling, (nitrogen post-filling), stopper unscrambling, stopper pressing, cap unscrambling, capping and other complex functions, realizing automatic production of the whole process. Each machine can be used separately, or in linkage line. The whole line is mainly used for filling of vial liquid injections and freeze-dried powder injections in pharmaceutical factories, it can also be applied to production of antibiotics, bio-pharmaceuticals, chemical pharmaceuticals, blood products etc.

The oral liquid filling production line is composed of three equipments: bottle washing machine, tunnel sterilization oven, and oral liquid filling capping machine. It is divided into three working areas: cleaning, drying and sterilizing, filing and capping. Each machine can be used separately or in linkage line. During linked production, it can automatically complete cleaning, preheating, drying and sterilization, cooling, filling, screw (rolling) capping and is suitable for the production of packaging lines for oral liquid bottles and other small-dose solutions in the pharmaceutical, health care, food and other industries

The oral syrup liquid filling capping machine production line is composed of four types of equipment: bottle unscrambler, bottle washing machine, tunnel sterilization oven, and liquid filling and capping machine. Each equipment can also be working independently; It can automatically complete bottle unscrambling, cleaning, pre-heating, sterilization, drying, cooling, filling, screw (rolling) capping, and other processes and is suitable for syrups, tinctures, wines, health products, beverages, sauces and other liquids with different viscosity in the pharmaceutical and food industries packaging line production;

The vial filling production line is composed of ultrasonic bottle washing machine, dryer sterilizer, filling stoppering machine, and capping machine. It can complete spraying water, ultrasonic cleaning, flushing of inner and outer wall of bottle, preheating, drying and sterilization, heat source removing, cooling, bottle unscrambling, (nitrogen pre-filling), filling, (nitrogen post-filling), stopper unscrambling, stopper pressing, cap unscrambling, capping and other complex functions, realizing automatic production of the whole process. Each machine can be used separately, or in linkage line. The whole line is mainly used for filling of vial liquid injections and freeze-dried powder injections in pharmaceutical factories, it can also be applied to production of antibiotics, bio-pharmaceuticals, chemical pharmaceuticals, blood products etc.

The Full Marya Ampoule Line Glass Ampoule Machine is composed of ultrasonic bottle washing machine, dryer sterilizer and ampoule filling and sealing machine. It can complete spraying water, ultrasonic cleaning, air & water flushing of inner and outer wall of ampoule bottle, preheating, drying and sterilization, heat source removing, cooling, (nitrogen pre-filling), filling, (nitrogen post-filling), ampoule sealing and other complex functions, realizing automatic production of the whole process. Each machine can be used separately or in linkage line. The whole line is mainly used for ampoule injections filling in pharmaceutical factories and the general type can also be used for antibiotic vial injection filling or powder filling.

The ampoule filling machine line is composed of ultrasonic bottle washing machine, dryer sterilizer and ampoule filling and sealing machine. It can complete spraying water, ultrasonic cleaning, air & water flushing of inner and outer wall of ampoule bottle, preheating, drying and sterilization, heat source removing, cooling, (nitrogen pre-filling), filling, (nitrogen post-filling), ampoule sealing and other complex functions, realizing automatic production of the whole process. Each machine can be used separately or in linkage line. The whole line is mainly used for ampoule injections filling in pharmaceutical factories and the general type can also be used for antibiotic vial injection filling or powder filling.

NP-WF Linear type Bottle Rinser by water is widely used for rinsing the new glass bottle and jars before filling. The rinsing can choose pure hot water or normal temperature purified water. The water after cleaning the bottles and recycling into the water tank for purify and heating again to reduce the water comsuption.The ultronic device is for option to meet the high requirement, Servo system bottle rinser Servo motor driven the bottle clamper to turn up 180 degree, the turning speed is frequency converter control. The rinse spary head are specially designed for different types of containers, ensure 100% rinsing the inside of the bottles. Rinsing head will insert into the container for cleaning. The machine is frequency speed control, change bottles no need additional changeover parts. A high pressure water pump and a water recyling pump ensure the rinse pressure and recyling water in time

This machine is used for plastic round, shaped or square bottles unscrambling equipment. No matter what the status of the bottle feeding, the machine can automatically complete the bottle feeding, bottle unscrambling, flip, arranging, bottle output, and connected with later packaging equipment. The machine uses high quality stainless steel or non-toxic pollution-free engineering plastic, adopts mechanical transmission technology, different bottles can work on a machine by adjusting machine parts, has stepless adjustable speed, simple operation, high degree of automation.

Automatic ionized air rinser/bottle cleaning machine is mainly used for clean the inside of the container , both for glass and plastic bottles, usging the pure filted ionized air and sunction the dust to ensure the containers are cleaning. This bottle air rinsing machine is a linear types, multy heads from 2 nozzles to 20 nozzles to meet the capacity demand, the diving nozzles driven by servo motor, and if choose the turn up types for cleaning, the turning arm will be also driven by a servo motor. The machine is universal for glass bottle and plastic bottle rinsing with air.. It blows inside of bottle with clean air and sucking the dust out of the bottle. The working principle is: when the bottle into the conveyor, the compressed air will be discharged high pressure air to clean the container, when blowing air meanwhile will suction the dust.

NP-RL Vertical round bottle labeling machine is a self adhesive labeling machine design for round bottle labeling with single label pasting. It is original technology from Italy, high speed labeling and stable.The whole machine frame is adapt 304 stainless steel,servo motor driven the labeling head, PLC control,frequency speed adjust.The labeler can equip with a date coder for printing date, LOT number, also bar code.The detection function is as an option, such as automatically rejection for missing label,automatic warning on missing label, automatic rejection for no date printing etc.

Our PET bottle recycle machine line is designed to give great recycling solution for PET bottle recycle process. We provide different solutions according to our customers PET bottle recycle machine demand, such as different capacity, dirtiness level, hot washing or cold washing system or etc. So we design our PET bottle recycle machine according to our customer's market requirements. Our PET bottle washing line can be designed for high level dirty PET bottles, with or without bales, Hot-Wash or Cold-Wash and etc. PET Bottles Recylce Machine Line Main Units, – Conveyor – Bale Opening Machine – Helezon – Cap and Label Remover – Sorting Belt – Drum Tromel – Conveyor Belt – Crusher Machine – Screw Loaders – Hot Washing Unit – Friction Washer – Flotation Tanks – Drying Units – Big Bag Filling Unit Just contact with us for your PET bottle recycling machine research, we will provide the optimum solution.

The process of sterilisation is among the most complex ones when dealing with plastic materials. Plastic materials cannot be sterilised with high temperature because they would be permanently physically deformed. The containers are sterilised with ionising radiation (y radiation) or with gas and moisture (gas sterilization). Products which are packed for sterilization are packed in multilayer packaging in order to meet custumer´s requirements (standards) for proper upgrade of products from lower to higher level of purity. Every batch of sterilised products is accompanied by an adequate sterilization documentation. The efficiency of every sterilization process is checked by an adequate biological indicator.

capacity between 2.400 - 32.000bph neck handling system bottle volumes 0,5 lt - 1,5 lt, 5 lt, 10 lt, 19 lt screw cappers for carbonated & non-carbonated products