Bridge monitoring - Import export

As a Signal Conditioner, the AN1500M is designed to process and display signals coming from various types of transducers (weight, load, pressure, torque, etc.) that use standard strain-gauge bridges. As a Load Monitor the AN1500M can also receive any signal within the ±150mVDC range coming from a shunt, a converter or any type of transmitter. The Load Monitor provides selectable input ranges (±15mV, ±30mV, ±150mV) and excitation voltages (5V, 10V) to accommodate cells of various types and sensitivities. Two programming methods allow scaling of the meter to operate in the desired engineering units. The basic instrument is a soldered assembly composed of a main board, a tri-color programmable display and a power circuit. Standard features include the reading of the input variable as well as remote (HOLD), the reading and memorization of minimum/maximum values (PEAK/VALLEY), TARE and RESET function, and a full complement of programmable logic functions.

Your benefits In the Office Web access for Fleet Management On the Bridge – Performance and monitoring Management In the ECR – Performance and monitoring of all data calculated KPI‘s Areas of application The Fuel Performance System (FPS 2.0) is an open PLC-web based system to record signals, which are important to enable full transparency of all fuel and performance parameters of shipoperation process. With fuel flow meters CONTOIL® sensors, shaft power meter SPM and addi-tional data from ship automation the fuel consumption and fuel efficiency data can be acquiredand stored for further analysis and reporting (CO2 reporting MRV).

Adapter RSAM80 & RSAMG80 Bridge construction and bridge monitoring Tunnel construction Earth and rock monitoring – e.g. steeply upwards or along the slope Enables measurements and monitoring from virtually any angle, where space is tight and on hard-to-reach areas The clip system allows the original measurement point to be restored both quickly and cheaply in the event of damage. Many measurements can be carried out within a short time when used with up-to-date total stations. Drilling is no longer required as pre-installed anchor sleeves for Dw15 threads can be used for mounting Anchor sleeves can be installed during the construction phase for survey points, e.g. above and below the bridge support, in the case of retaining structures and in many more applications. Material: Stainless steel V4A Temperature and UV-resistant Crosshairs are imprinted on the backing plate under the exact centre of the reflective target to ensure the survey point is durably marked. If the reflective t

Angled Plastic Adapters RSAK80 and RSAK130 Unmistakable survey points 3-dimensional monitoring of bridges Roads no longer need to be closed or obstacles crossed as every measuring point can be checked from a distance of up to 200m, range depends on the measurement equipment Simple and quick measurement and monitoring of buildings, façades, supporting structures, pillars, high rack storage facilities, dams and many other objects requiring monitoring For monitoring the formwork during concrete pouring, e.g. for bridge arches, single-faced wall formwork For monitoring railway tracks where there is surrounding building work e.g. bridge and tunnel construction, pressure grouting of railway lines, etc. Measurements and monitoring are possible from virtually any angle and at locations which are difficult to access The RSMP15 adapter with a 12.7 mm mini prism is used for all the applications referred to above if measurements using a prism are desired or necessary Temperature and UV-resistant