Carbide cutting - Import export

Glass wool transversal cutting N°1 - Chopper blades Glass wool lengthwise / transversalcutting N°2 - Saw with slots and scalloped teeth N°3 - Saw with slots and perforations Rock wool cutting N°4 - Saw with slots N°5 - Circular knife with carbide inserts Hemp wool cutting N°6 - Knife with cooling slots Polystyrene cutting N°7 - Single bevel knife with slotted holes Cardboard cutting of plasterboard N°8 - Toothed knife

Metal-bonded grinding tools for flute grinding With the STARTEC XP-P+ product line, TYROLIT defines a new performance level for the flute grinding of tungsten carbide cutting tools. Two different diamond qualities and the innovative bond structure lead either to significantly reduced grinding forces or to a major increase in profile retention. The precision of the machined tools remains at the usual high level. Increased feed speed Easy profiling Extended dressing intervals

Ronix SDS Plus Drill Bit Ø 6mm is heat-forged for strength and longevity with a sharp Tungsten Carbide Tip edge which is designed for maximum impact on masonry/concrete material by allowing for effective and precise hammer drilling. The shank is made of heat-forged and hardened steel. The material used for the tip is tungsten carbide which makes this Ronix hammer drill bit easy and reliable inside deep and heavy-duty masonry, reinforced concrete, tile, brick and cinder block. Ronix SDS Plus Drill Bit Ø 6mm feature 2-flute self-centering carbide tips which ensure fast cut speed and maximum lifetime. The flutes are specially designed to allow maximal amount of concrete removal for both ease of use and effectiveness in concrete/masonry drilling and hammer drilling.

Ronix SDS Plus Drill Bit Ø 10mm is heat-forged for strength and longevity with a sharp Tungsten Carbide Tip edge which is designed for maximum impact on masonry/concrete material by allowing for effective and precise hammer drilling. The shank is made of heat-forged and hardened steel. The material used for the tip is tungsten carbide which makes this Ronix hammer drill bit easy and reliable inside deep and heavy-duty masonry, reinforced concrete, tile, brick and cinder block. Ronix SDS Plus Drill Bit Ø 10mm feature 2-flute self-centering carbide tips which ensure fast cut speed and maximum lifetime. The flutes are specially designed to allow maximal amount of concrete removal for both ease of use and effectiveness in concrete/masonry drilling and hammer drilling.

Ronix SDS Plus Drill Bit Ø 12mm is heat-forged for strength and longevity with a sharp Tungsten Carbide Tip edge which is designed for maximum impact on masonry/concrete material by allowing for effective and precise hammer drilling. The shank is made of heat-forged and hardened steel. The material used for the tip is tungsten carbide which makes this Ronix hammer drill bit easy and reliable inside deep and heavy-duty masonry, reinforced concrete, tile, brick and cinder block. Ronix SDS Plus Drill Bit Ø 12mm feature 2-flute self-centering carbide tips which ensure fast cut speed and maximum lifetime. The flutes are specially designed to allow maximal amount of concrete removal for both ease of use and effectiveness in concrete/masonry drilling and hammer drilling. Ronix SDS-Plus Drill Bits are made of steel and heat-forged for absolute strength and longevity with a sharp Carbide.

Ceramic Trapezoid Blades are very suitable for fibers, tapes, film, leather, paper cutting machine application. Our material is yttrium stabilizes zirconia ceramic. Unlike other ceramic matetials, Zirconia ceramic is a material with high flexural roughness.Therefore it is not fragile and proper for producing blades. Another advantage is very sharp. Cutting performace is better than Tungsten carbide. Features: 1. Faster cutting rates 2. Consistently good cutting quality, e.g. improved strength of spliced connections 3. No corrosion 4. Smooth running 5. Extended maintenance intervals 6. Universal cleaning possibilities using acids, alkaline solutions and organic solvents

Ceramic Rotary Blades are very suitable for fibers, tapes, film, leather, paper cutting machine application. Our material is yttrium stabilizes zirconia ceramic. Unlike other ceramic matetials, Zirconia ceramic is a material with high flexural roughness.Therefore it is not fragile and proper for producing blades. Another advantage is very sharp. Cutting performace is better than Tungsten carbide. Features: 1. Faster cutting rates 2. Consistently good cutting quality, e.g. improved strength of spliced connections 3. No corrosion 4. Smooth running 5. Extended maintenance intervals 6. Universal cleaning possibilities using acids, alkaline solutions and organic solvents

Ceramic Octagon Blades are very suitable for fibers, tapes, film, leather, paper cutting machine application. Our material is yttrium stabilizes zirconia ceramic. Unlike other ceramic matetials, Zirconia ceramic is a material with high flexural roughness.Therefore it is not fragile and proper for producing blades. Another advantage is very sharp. Cutting performace is better than Tungsten carbide. Features: 1. Faster cutting rates 2. Consistently good cutting quality, e.g. improved strength of spliced connections 3. No corrosion 4. Smooth running 5. Extended maintenance intervals 6. Universal cleaning possibilities using acids, alkaline solutions and organic solvents

Zirconia Ceramic blades are very suitable for fibers, tapes, film, leather, paper cutting machine application. Our material is yttrium stabilizes zirconia ceramic. Unlike other ceramic matetials, Zirconia ceramic is a material with high flexural roughness.Therefore it is not fragile and proper for producing blades. Another advantage is very sharp. Cutting performace is better than Tungsten carbide. Features: 1. Faster cutting rates 2. Consistently good cutting quality, e.g. improved strength of spliced connections 3. No corrosion 4. Smooth running 5. Extended maintenance intervals 6. Universal cleaning possibilities using acids, alkaline solutions and organic solvents Precision manufacturing: Cylindricity up to 0.004mm, linear tolerance up to 0.001mm, dimensional accuracy up to 0.001mm, thread minimum machinable internal thread M2, thickness up to 0.02mm, concentricity up to 0.003mm, minimum aperture up to 0.07mm...And other parameters.

Zirconia Slotted Ceramic Blades are very suitable for fibers, tapes, film, leather, paper cutting machine application. Our material is yttrium stabilizes zirconia ceramic. Unlike other ceramic matetials, Zirconia ceramic is a material with high flexural roughness.Therefore it is not fragile and proper for producing blades. Another advantage is very sharp. Cutting performace is better than Tungsten carbide. Features: 1. Faster cutting rates 2. Consistently good cutting quality, e.g. improved strength of spliced connections 3. No corrosion 4. Smooth running 5. Extended maintenance intervals 6. Universal cleaning possibilities using acids, alkaline solutions and organic solvents

Our production covers the whole range of knives for cutters of various manufacturers. We have sufficient supplies of material and are able to respond very quickly to produce a knife for any cutter. We also manufacture knives with plates for special applications, for the textile industry etc. We produce carbide knives up to 3000 mm long. The carbide we use for our knives is F10. It is an alloy of submicron carbides with good strength for cutting paper and textile, so called Feinstkornmetall, i.e. carbide with fine structure ensuring long life (a high number of cuts).

These knife sharpeners contain two options for sharpening knives: rollers with zirconium dioxide coating for fine-tuning the blade to polish it for a softer and smoother cut and tungsten carbide coated rollers for rough sharpening of the blade, which helps to repair the damaged blade, including smoothing chips and bumps on its surface.

These knife sharpeners contain two options for sharpening knives: rollers with zirconium dioxide coating for fine-tuning the blade to polish it for a softer and smoother cut and tungsten carbide coated rollers for rough sharpening of the blade, which helps to repair the damaged blade, including smoothing chips and bumps on its surface.

Drillstar Industries washover shoes (also known as rotary shoes or mill shoes) are available in a wide range of dimensions and threads. They come in 12 types, each designed for a specific application. The design chosen will depend on the material to mill, and on whether the shoe should cut on the bottom, on the OD, on the ID or on any combination of these. These tools have an extended lifespan due to the special treatment applied before hardfacing. They can be stabilized upon request. Shoes can be dressed with your choice of TOPLOY or custom hardfacing (tungsten carbide cutting plates, etc.)

The HCS MULTI-FLUID is a series of carbide circular saw manufactured by Eisele. The key highlights of the HCS MULTI-FLUID series include a firm base frame that is welded, a bigger scope of cutting, an arbitrary saw blade that is accessible to ensure maximum cutting scope that can reach up to 180 mm . The machine has a sturdy and robust base frame on which the combined sawing unit and material feed unit are mounted. This structure combined with a very robust machine design ensures a smooth sawing process with excellent cutting results and a long service-life of the saw blade. The Multi-Fluid system is excellent for high-alloy stainless steels and tool steels, nickelbasedalloys like Inconel and Hastelloy as well as titanium alloys. Depending on the requirements, the following cooling/lubrication components can be combined in a most effective way: — Coolant nozzles for wet processing — Micro-spraying device for minimum quantity lubrication — Cooling vortex tube for dry cutting

Working Principle: The counterbore is machined to the preset depth by the simultaneous application of both a rotary and vertical or horizontal feed motion to the carbide cutting insert. While the cutting insert rotates in a circle around the counterbore, a feed gear mechanism ensures a continuous feed motion. The lathe-type refacing action provides smooth and closely fitting contact surfaces for oversize valve seat rings. Features: The motor drive unit of the VD4HD-ADM is identical with the motor drive unit of the VD4HD Valve Seat Refacing Machine and, therefore, is only required, if no VD4HD is at hand. Two types of exchangeable boring gear heads are available. The standard AV boring head is provided with a vertical slide for counterboring. The optional AVH boring and facing head is provided with a vertical and a horizontal slide for counterboring and facing the bottom of the bore.

Engineered for : • Aluminium alloys • Aluminium bronzes • Copper alloys • Sand cast aluminium and cast magnesium • Graphite

Engineered for : • All-purpose use for construction steel, low-alloy steel, cast iron, aluminium, copper and bronze • Solid material in medium and large dimensions

Engineered for : • Titanium alloys • Metals with high residual stress • Stainless steels • Special alloys • Abrasive non-ferrous metals and graphite

With the DHC Premium solid carbide end mills, LMT Tools significantly increased the performance of the low-vibration premium tools: 25 % added machining volume is the result of different helix angles in connection with newly developed, stable front cutting edges and peripheral teeth. Additionally, the new cutting material LCPK30M including an innovative PVD high-performance coating contributes to an improved tool life and a safe chip removal. A special performance feature of the DHC Premium end mill (Different Helix Cutter) by LMT Fette consists in its multifunctionality: it allows the user to rough and finish with the same tool. It can also produce narrow projections and up to 2xd-deep slots in steel and cast materials with exceptional surface quality. Advantages: - Increase of the machining volume by 25 % - Increased process reliability due to stable cutting edges - Multifunctional – roughing and finishing with the same tool

Tungsten Carbide cutting inserts for notching of HSS rolls Possible diameters of TC inserts are 3.0-30.0mm It is for notching of metallurgical rolls (production of rebar)

Carbide cutting tools

More than 30 years of experience in producing special carbide cutting tools, our professional team are ready to help you to solve the cutting tools problems.