Electrical & electronic components - Import export

Place of Origin: China Base Material: FR-4 Copper Thickness: 1/2OZ 1OZ 2OZ 3OZ Board Thickness: 0.8mm Min. Hole Size: 0.1mm Min. Line Width: 0.065mm Min. Line Spacing: 0.065mm Surface Finishing: HASL Application: Electronics Device Type: Customizable Solder mask: Black Material: FR4 CEM1 CEM3 height TG Color: Red Blue Green Black Testing Service: 100% Supply Ability: 25000 Square Meter/Square Meters per Month

Plastic and TPU car holder, 360 ° swivel and universal to hold your phone while driving. Simply clip the bracket to the vent and put your mobile phone (up to 7 pouces) on it.

NSPV surge protective device AC Surge protection device(SPD) is an indispensable device for lightning protection of electronic equipment. It is used to limit the instantaneous overvoltage of the power line and signal transmission line to the voltage range that the equipment or system can withstand, or A powerful lightning current drains into the ground to protect the protected equipment or system from impact and damage.

NSPV surge protective device DC SPD protect against lightning surge voltages in solar system (photovoltaic power supply system). These units must be installed in parallel on the DC networks to be protected and provide common and different modes protection. Its installed location are recommended at both ends of the DC power supply line (solar panel side and inverter/converter side), especially if the line routing is external and long.High energy MOVs equipped with specific thermal disconnectors and related failure indicators.

NSPV MCCB DC The moulded case circuit breaker has the protection devices of over load, short circuit and under voltage, it can protect the circuit and power equipment from broken. The MCCB has the features of small volume, high breaking capacity, short electric arcing and anti-vibration. It is the ideal product for application in land and ship.

NSPV MCCB DC The moulded case circuit breaker has the protection devices of over load, short circuit and under voltage, it can protect the circuit and power equipment from broken. The MCCB has the features of small volume, high breaking capacity, short electric arcing and anti-vibration. It is the ideal product for application in land and ship.

NSPV miniature circuit breaker enclosure box Features: IP66 waterproof; Easy operation; Exquisite design; Highly waterproof and dustproof; Flame-resistant Material.

NSPV miniature circuit breaker enclosure box Features: IP66 waterproof; Easy operation; Exquisite design; Highly waterproof and dustproof; Flame-resistant Material.

NSPV Solar fuse holder din rail 1000VDC NSDF38 type Features: Replaceable fuse; Flame retardant shell; A range of 10x38mm fuse links specifically designed for protecting photovoltaic strings; With mounting rails.

NSPV Solar(PV) Power Protection Fuse 1000VDC NSPV-25 type This series of specifications for the use of the physical, rated working voltage 1000V, rated current 1-30A electric line for overload or short circuit protection which comply with IEC60269-6 standard.

NSPV Stainless steel cable ties They have an unique ball locking with Plastic jetting mechanism that allow easily and quickly installed and High tensile strength; Non-flammability. Stainless steel cable ties are a quick effective way of securing cables.They can be used in virtually all indoor outdoor,heavy industrial and underground applications.

NSPV Terminal block 2P-20P Features: Heavy duty, corrosion resistant screws.

● The junction box uses the PPE/PA,High rigidity, high temperature resistance chemical resistance, wear resistance and pollution resistance ● The junction box uses the glue to seal, the waterproof effect is better, the fitting interior heat is better. ● This junction box is a three-part design, and the cable adopts horizontal outlet mode, which can reduce the cable bending stress, save the cable usage, reduce the power loss of PV module, and divide the influence of "hot spot effect" into three parts. The influence of high temperature on photovoltaic modules is reduced. ● The diode and the terminal adopt an integrated packaging mode, and the terminal uses red copper

NSPV 1500VDC Solar PV din rail fuse holder NSPV-63T type Features: TUV certified; High voltage and high current; Suitable for fuse 10/14*85mm; Standard IEC60269-6.

NSPV 1500VDC Solar PV din rail fuse holder NSPV-50L type Features: TUV approved; High voltage and high current; Suitable for fuse 10/14*85mm; Standard IEC60269-6.

NSPV Solar(PV) Power Protection Fuse 1500VDC This series of specifications for the use of the physical, rated working voltage 1500V, rated current 2A-50A electric line for overload or short circuit protection. Rated breaking capacity 20KA, products comply with IEC60269-1/GB13539-1 and IEC60269-6/GB13539-6 standards, and size for 10*85 or 10/14*85mm.

Wireway Fastener material: aluminum alloy 6061-T4 thread grade: rolled/cut 3/8-18 NPSM thread x 0.39 +/-0.04 inch size: cap outer diameter 0.995-0.997 inch, height 2.50±0.03 inch cap slot - width 0.062±0.010 inch, depth 0.093±0.010 inch Soochow Advance Industries Co., Ltd., (website: www.sai-parts.com) supplies custom OEM mechanical parts, industrial fasteners, screws, bolts, nuts, industrial fittings, electronic hardware by precision CNC machining, CNC turning, CNC milling, CNC engineering.

5 inch Round TFT IPS LCD with high resolution provides clear and rich images, widely applied in commercial and smart home appliants. This Liquid Crystal Display has a built-in HX8399C controller. Optional custom solution with capacitive or resistive touchscreen. The material is RoHS compliant. Diagonal (inch): 5.0″ Resolution (pixel): 1080×1080 Display Type: IPS Display Mode: Transmissive Optimal View: Full View Touch Screen: Custom Module Dimensions (mm) (W x H x D): 136.53×132.20×1.98 Active Area (mm) (W x H): 127.00 x127.00 Luminance (cd/m2): 400 Interface: MIPI Driver IC: HX8399C Operational Temperature (°C): -20 ~ +70 Storage Temperature (°C): -30 ~ +80

Length: 59mm, width: 36mm and height: 10.8mm; Groove width: 2.5mm Output mode: NPN.NO.NC Detection characteristic: common tag detection, Full-metal case Output mode: ф4*2M/4-Wires Push-button adjustment

Length: 60mm, width: 39mm and height: 14mm; Groove width: 2mm Output mode: NPN.NO.NC Detection characteristic: common tag detection, Full-metal case Output mode: ф4*2M/4-Wires Self regulated by potential regulator

M4 through-beam glass fiber, with Φ2.9×1.0 optical fiber cable, 1M convex tube without, detection distance of 300mm, minimum detection size of Φ0.05 and operating temperature of -40°C ~ 350°C.

Window-shape fiber (has passed the detection as per blanking count), with LWH of 89×52×10.7mm, detection distance of 35 ~ 35mm and minimum detection size Φ20×20.

Φ1.0×0.5 optical fiber cable, with LWH of 10.5×6×2.5mm, detection distance of 100 ~ 130mm, minimum detection size of Φ0.5, flexible line and wire length of 1M

Pigtail integrated holder, with Φ2.2×1.0 optical fiber cable (R1 flexible line), LWH of 7×20×4mm, detection distance of 70 ~ 90mm, minimum detection size of Φ1 and wire length of 1M.

Multi-point slot-type through-beam optical fiber tube, with slot width of 12mm, different slot width for selection and sizes for customization.

R2 bending radius rectangular optical fiber tube for through-beam mode, with standard red tail sleeve for protection. M4. Threaded head universal fiber optic sensor.

M3 threaded right-angle optical fiber that supports diffuse reflection, with different length for selection and sizes for customization.

Rectangular side-detection fiber optic sensor that supports diffuse reflection

M6 cylindrical non-threaded light pole side-detection reflective light sensor, with different sizes for selection.