Closing systems - Import export

Machine is made of plexi products that close around it. The machines are protected within the scope of occupational safety for security purposes. The system has the feature of stopping itself when the cover is opened by putting a cutter switch where necessary. Safety shutdown can be done for every machine It is projected according to the machine condition. Aluminum and transparent and colored plexi production can be made according to the stop. It is guaranteed for 2 years against factory faults.

The high-performance sewing machine from STATEC BINDER stands for precise and reliable bag sealing of woven PP, paper or PE bags. Two different variants can be used for sewing the bags. On the one hand there is the straight-line bag infeed, in which the bag is fed to the sewing head by means of a belt drive and then sewn at the upper end. The second variant is the bag edge folding, in which the bag is folded at the upper end when it is pulled in and then sewn. In order to change from one system to the other, it is only necessary to replace a simple device. The bag to be sewn is fed to the sewing machine via one of the two variants mentioned above. Depending on the sewing speed and performance, the stitch length is between 7 and 12 mm. A cutter at the end cuts the thread. The sewing head is driven by a motor with frequency converter. A big advantage over the drive via belt pulleys is a more precise adjustment of the speed.

The patented bag closing system “Over Tape Bag Sealer” from STATEC BINDER seals woven polypropylene (PP) bags airtight. A woven PP tape is used for a reliable and secure closure. If necessary, the bags can also be sewn. Both pillow bags and gusset bags can be securely closed. This sealing technology facilitates the handling of dusty and odour-intensive products of the food and feed industry. During operation, the filled bags are transported to and from the bag closing system via a conveyor belt. A sensor detects the position of the bag and automatically puts it into the trimming area. After cutting the top edge of the bag a woven PP tape is applied over the open edge of the bag to seal it with hot air. The hot air to seal the bag airtight and odourless is produced by a heating unit in the machine.

The Miller Weldmaster Bag Closing System is designed and build to weld and seal Thermoplastic and paper bags closed with a Pinch and/or Double Fold. The PS400 can weld Polywoven and thermoplastics with no glue; paper bags use pre applied hot melt. The PS400 can be integrated into an automatic filling line and/or manual feed systems. FEATURES, FUNCTIONS, & BENEFITS Digitally controlled by the Miller Weldmaster Smart Screen for quick production start up Controlled line speed matching system enables synchronization with converting line Precision folding system for clean straight folds Recipe management system for easy recall of different batches Quick change folding system for size and type of fold No glue eliminating consumables

The Miller Weldmaster PS150 Top Closing System is designed and built to weld and seal Polywoven, Thermoplastic and paper bags. The PS150 can seal Pinch closures. The PS150 can weld Polywoven and thermoplastics with no glue; paper bags use pre applied hot melt. The PS150 is custom designed for easy integration into your new or existing filling line. FEATURES, FUNCTIONS, & BENEFITS Digitally controlled by the Miller Weldmaster Smart Screen for quick production start up Controlled line speed matching system to enable synchronization with the converting line Precision folding system for clean straight folds Recipe management system for easy recall of different batches Quick change folding system for size and type of fold No glue eliminating consumables

Small and solid, the 10 FEET HIGH CUBE MARITIME container is perfect for small spaces. Waterproof and airtight, it guarantees optimal conservation of its contents. Can be used indoors or outdoors, its robust steel structure and closing system ensure the safety of stored goods. INTERIOR DIMENSIONS Length: 2.82m Width: 2.35m Height: 2.69 m EXTERIOR DIMENSIONS Length: 2.99 m Width: 2.43m Height: 2.89 m.

Telescopic actuator with a synchronized toothed belt system for effective linear movement and minimal overall dimensions. The compactness of the closed system makes it ideal for environments without much space between the machine and the ceiling. LOAD CAPACITY ACCORDING TO DYNAMICS Reported data must be verified according to the application. Please get in touch with our technical department for more information.

» Opening possibilities Side hung of 1, 2, 3 & 4 sashes Bi-fold Slider » Closing Possibilities Fixed or adjustable louvres Opaque closing (panel sandwich) Glazed closing » Sections Frame 47 mm Sash 40 mm » Profile thickness Window 1.3 mm Door 1.5 mm » Maximum dimensions/sash Side hung Width (L) = 1600 mm Height (H) = 2500 mm » Counter-window system » Fixed or adjustable louvres » Opaque closing system (sandwich panel) » Allows for glazed closing Bi-fold Width (L) = 700 mm Height (H) = 2500 mm Slider Width (L) = 2000 mm Height (H) = 3500 mm Please consult regarding maximum weight and dimensions for other opening types » Maximum weight/sash Bifold 50 kg Side hung 65 kg Slider 120 kg » Finishes Powder coating / Anodised

One particular challenge in the refrigerator recycling process is presented by chlorofluorocarbons such as R 11, R 12 or R 141b, which were used for decades as foaming agents for insulation materials. Since these substances damage the Earth’s ozone layer when released, they must be removed and collected securely in a closed-system pre-processing plant. With ERDWICH, you are assured of the latest, technologically advanced solutions: Whether you’re handling small-scale units or complex refrigeration plant: utilise the expertise we’ve gained in processing over 30 million refrigerator units. To get an idea of what we’re capable of, please see the following Case Studies. Now it’s your turn: we look forward to receiving your project enquiry!

Several million scrap refrigerator units are disposed of every year in Germany alone. The proportion of refrigeration units recycled by volume totals about 40% and is the most significant segment after consumer electronics. One particular challenge in this recycling process is presented by chlorofluorocarbons such as R 11, R 12 or R 141b, which were used for decades as foaming agents for insulation materials. Since these substances damage the Earth’s ozone layer when released, they must be removed and collected securely in a closed-system pre-processing plant. The fact that pre-processing of legacy refrigeration units always needs to be carried out in accordance with the latest technological standards means that plant operators gain a decisive advantage when working with an innovative and experienced plant manufacturer. With ERDWICH, you are assured of the latest technologically advanced solutions – even for the most demanding and safety-conscious refrigerator recycling. The...

The ALW is a comfortable, ergonomic, and compact seated workstation that offers plenty of legroom, and which can be adjusted to the height of the operator via the height-adjustable foot plate. The observation lens offers a variable viewing angle from 10° – 50°, thus ensuring comfortable working. The closed, laser-proof housing makes the ALW a laser-protected workplace that can be used in a normal production environment without additional safety precautions. The laser system is easy to operate. In addition to configuring via the display, the laser parameters can be adjusted via the patented multifunction footswitch or adapted accordingly during welding. The large doors of the ALW can be opened wide. This facilitates easy loading.

TABLETOP VACUUM MACHINE - 1 FRONT BAR LENGTH 450 mm Professional bench vacuum machines in stainless steel, which can be set from the panel with 10 customizable programs. Through the convenient display it is possible to view the various parameters of the vacuum. The display shows the need for oil change with a special message. An electronic sensor of last generation detects the degree of vacuum obtained inside the chamber. All FPMV models are endowed with a safety system against the risk of sealing bars overheating. Vacuum capacity is 99,9%. Available models: FPMV 45 1BF - 1 450 mm front bar - 20 mc/h vacuum pump - without gas FPMV 45 1BFG - 1 450 mm front bar - 20 mc/h vacuum pump - with gas Only when ordering is it possible to request the integrated printer for printing an adhesive label showing the packaging data.

Impulse sealer with mechanical pedal and floor support for the closure of bags in plastic material heat-sealable, impulse sealing (resistance to heat for a few seconds) and timer for adjustment. At the end of the sealing is possible to trim the bag with the cutter installed on the bar. The open structure also allows you to install a coil on the back of the machine and to obtain envelopes of the desired length using the tubular film. The sealing head can be tilted up to 45 ° to allow the closure of the envelopes containing liquids or powders. Maximum thickness of 0.15 mm sealable . (0.30 mm. Overall)

With our recooling systems we provide a closed loop system that doesnt need any fresh water, has no corrosion issues and doesnt release sewage water, all whilst keeping your induction heating system reliably at ideal working temperatures for 24/7 operation.

Adjustable, Without Free Travel Compression Force max. 50,000 N Stroke 100 mm Motion control in both directions: The HBD model of hydraulic dampers can be adjusted independently in both the push and pull direction. These maintenance-free, ready-to-install and closed systems leave no prayers unanswered as far as the setting of retraction and extension speeds are concerned. In addition each damper works without any free travel therefore the flow of oil can be regulated exactly via the two precision metering orifices. Adjustment can be made once installed and even when moving through stroke. The coated body and hard-chromed piston rods stand for quality and long service life. The variety of mounting accessories makes assembly easy and the high-end hydraulic dampers universally usable.

Adjustable, Without Free Travel Compression Force max. 10,000 N Stroke 100 mm Motion control in both directions: The HBD model of hydraulic dampers can be adjusted independently in both the push and pull direction. These maintenance-free, ready-to-install and closed systems leave no prayers unanswered as far as the setting of retraction and extension speeds are concerned. In addition each damper works without any free travel therefore the flow of oil can be regulated exactly via the two precision metering orifices. Adjustment can be made once installed and even when moving through stroke. The coated body and hard-chromed piston rods stand for quality and long service life. The variety of mounting accessories makes assembly easy and the high-end hydraulic dampers universally usable.

Adjustable, Without Free Travel Compression Force max. 6,000 N Stroke 50 mm Motion control in both directions: The HBD model of hydraulic dampers can be adjusted independently in both the push and pull direction. These maintenance-free, ready-to-install and closed systems leave no prayers unanswered as far as the setting of retraction and extension speeds are concerned. In addition each damper works without any free travel therefore the flow of oil can be regulated exactly via the two precision metering orifices. Adjustment can be made once installed and even when moving through stroke. The coated body and hard-chromed piston rods stand for quality and long service life. The variety of mounting accessories makes assembly easy and the high-end hydraulic dampers universally usable.

In the tried-and-tested, gasketed design, the EC-series offers many benefits to the user on top of its ease of operation. Due to the internal drainage, use in even the most hygienically clean areas is possible. The press lock is performed by an automatically self-regulating pneumatic/hydraulic closing system. The automatic closing pressure maintenance ensures that the plate pack always remains closed. An adjustable pressure switch with a potential-free contact is provided for integration into the customer's control system. This prevents the feeding pump from running uncontrollably. Also, as with all AQUACHEM filter presses, the discharge manifold can be generated here at the customer's request. Due to the gasketed design, the seamless backflushing of the filter media in the filter press is possible. The filter press frame is phosphated and powder-coated, offering a high level of protection against external influences.

The TFi3000 Autovent is a true efficiencywonder! The patented procedure for lowpressure steam cooking without any fans at all, in combination with automated work processes, reduces the operating costs to a minimum. Cooling of the products in the closed system, directly subsequent to heat treatment, also ensures ideal hygiene conditions and increases durability. Production justintime, controllable process with reproducible work processes Automatic transport system Much lower germ formation and contamination – for longer durability Short cooking times and weight loss reduced by up to 15% Temperature difference across the system no more than 1 °C Uniform products at maximum quality due to turbulences and air velocities up to 200 m/s Very low maintenance and operation costs thanks to dispensing with fans Long service lives due to stainless steel construction and steamtight welding allround

The TF3000 combines the Turbomat T3000 and the intensive cooling system IK3000 in a single closed system. This means one thing most of all Best output per chamber part for the shortest process times. The automated transport system not only reduces operating costs, but also increases production capacities in the system. Maximum output per chamber part Production justintime, controllable and reproducible processes Much lower germ formation and contamination – for longer durability Automatic transport system Producing, packaging and delivery in a very short time Lesser demand of cold storage capacities Higher trolley capacity as comparable floor conveyor systems by low construction

Adjustable Compression Force max. 1,800 N Stroke 50 mm High quality and long service life: The HB model of hydraulic damper can also be used as single or double acting brake. Its coated body in a slim gas spring design and the piston rods with wear-resistant surface coating are features of high quality and long service life. The maintenance free, ready-to-install and closed systems provide a constant feed rate and are adjustable, and the control segment on the piston makes adjustment at the end position child’s play. Thanks to many add-on components the assembly is easy to mount, so that the damper can be universally deployed for damping back and forth swinging masses, such as in power or free conveyors.

Adjustable Compression Force max. 800 N Stroke 25 mm High quality and long service life: The HB model of hydraulic damper can also be used as single or double acting brake. Its coated body in a slim gas spring design and the piston rods with wear-resistant surface coating are features of high quality and long service life. The maintenance free, ready-to-install and closed systems provide a constant feed rate and are adjustable, and the control segment on the piston makes adjustment at the end position child’s play. Thanks to many add-on components the assembly is easy to mount, so that the damper can be universally deployed for damping back and forth swinging masses, such as in power or free conveyors.

Adjustable Compression Force max. 180 N Stroke 10 mm High quality and long service life: The HB model of hydraulic damper can also be used as single or double acting brake. Its coated body in a slim gas spring design and the piston rods with wear-resistant surface coating are features of high quality and long service life. The maintenance free, ready-to-install and closed systems provide a constant feed rate and are adjustable, and the control segment on the piston makes adjustment at the end position child’s play. Thanks to many add-on components the assembly is easy to mount, so that the damper can be universally deployed for damping back and forth swinging masses, such as in power or free conveyors.

We have experienced metalworking locksmiths who handle a variety of tasks, including assembling, machining, and preparing metals for various applications. Their skills encompass a variety of metal work and ensure accurate and reliable results.

•Closing system with staples • Classic cut • Tunic collar • 2 side pockets

From 8 to 72 Modules Ergonomic opening / closing system Precise design with blank or smoked door Operating Temperature; -25 to +60C Hinged door which opens more than 180° Ready to install the terminal blocks for neutral and earth connection

It is special high performance oil that is formulated to be used in lubrication processes of closed gear systems such as industrial gear systems (reducers), and that provides operation easiness under excessive load and pressure.

Balcony Closing Systems with Glasses is the most modern way to create an aesthetic and functional balcony for your home. It is a system which provides best solutions for seasonal changes since the glasses can be folded and gathered in the same place. Therefore, you can enjoy your balcony as you never close them in the warm weather conditions. It protects from the outer factors in the bad weather conditions such as windy and rainy weathers. Our company sales the folding glass systems with the most affordable prices wholesale.

Swivel motors from this series are generally suitable when program sequences such as acceleration – travel – deceleration in open-loop or closed-loop controlled systems are determined via proportional or servo valves. The swivel motors in this series are often also suitable in combination with simple hydraulic circuits if the inertia forces occurring are small, e.g. when opening and closing emptying systems, actuating valves, placing and removing workpieces, swiveling load handling devices and much more. In order to provide our customers with the right drive for all areas of application, the HSG swivel motor is available in a total of 11 different versions. We have listed the most important data below. You can find all further details in our data sheet.