Co2 sensors - Import export

The MicroSENS 180-HS is an NDIR sensor for measuring 5 vol.-% CO2 in cell incubators. So our diffusion sensor is indispensable for controlling ideal cell and tissue growth. The sensor head is placed in the incubation chamber to measure the gas concentration in the cell culture environment. Based on IR absorption of the gas molecules the sensor determines the concentration of CO2. Our CO2 gas sensor convinces with a high reliability and a long lifetime thanks to its specifically developed dual-beam IR method without drift and susceptibility to interference. Decontaminate the CO2 diffusion sensor in an easy, effective and reliable way by heat sterilization at typ. 180 °C. Thanks to the digital and analogue interfaces, the sensor is easy to integrate. Find all technical information in our data sheet. Benefit from precise and reliable measurement of CO2, easy handling and minimal maintenance costs.

The EL-IOT-CO2 is an air quality meter that provides insight into carbon dioxide, temperature and humidity. This device continuously monitors the moisture and comfort of the environment, including CO₂. The data is automatically uploaded to the EasyLog Cloud, allowing instant viewing, analysis and downloading of complete readings from any device with an Internet connection. Within minutes, the device is set up. You can configure your own alarms for each measured parameter. When one of the alarms is exceeded, an alarm goes off immediately, and the set contacts receive an e-mail and text message.

The ASCO CO2 Flowmeter has been developed to accurately measure CO2 gas flow in closed pipes. The power unit, which supplies 230 V, operates a microprocessor controlled flow computer and one sensor. The ASCO CO2 Flowmeter is a complete system which is supplied fully calibrated and wired and therefore very easy to install.

The AirExchange® 1500-T is one of the most powerful air cleaning systems on the market and has a timeless design. The device is equipped with a touch-control operating panel and a clear display that shows real-time measurements such as the CO2-level, Particulate matter (PM2.5), humidity and temperature. In addition, you can control the device from a distance with our convenient application, Equipped with an arsenal of defense mechanisms, the AirExchange® 1500-T air purifier eliminates viruses, bacteria, pollen, dust, pathogens, allergens and chemical compounds from the polluted ambient air with an effectiveness of more than 99.995%. The AirExchange® 1500-T has a cleaning capacity (Clean Air Delivery Rate - CADR) of up to 1500m³/ hour and is suitable for room sizes up to 200m². The system uses a double filter with a washable mesh filter,antibacterial filter, microbiological HEPA H14 filter, carbon filter and a photocatalytic TiO₂ (Titanium Dioxide) filter as natural ionizer.

Off gas analysis in bioprocesses delivers important informatione about respiratory activity like CTR from which actions for process optimization and scale-up can be deduced from. The BCP-CO2 sensor will help you to understand and control your processes better. The CO2 analyzer BCP-CO2 services for application in fermenters and bioreactors of any scale. No matter if you are working in big stainless steel tanks, shake flasks, disposable, single-use or parallel reactorsthe BCP-CO2 is easy to install, doesn´t need much maintenance and offers an integrated, automatic pressure and temperature compensation. BCP-CO2 measures directly in the process. Additional pipes are not necessary. The extremely robust sensor has a IP65 aluminium housing and is well applicable under harsh process conditions.

The analyzer for carbon dioxide and oxygen has been specially designed for monitoring cell growth processes in biotechnology. The device can be installed directly in the exhaust flow of the bioprocess and measures the concentration of CO2 and O2 there in real-time. The BlueInOne Cell automatically compensates any fluctuations of pressure and humidity in the system. The readings are therefore extremely accurate even under fluctuating measuring conditions. The BlueInOne Cell gas analyzer is fitted with an IR CO2 sensor, as well as a electrochemical oxygen sensor with galvanic cell. The O2 detector offers a measuring range of 0-100 % Vol. for oxygen, long-term stability and has a very high resolution of 50 ppm. The device can also analyze anaerobic processes with high precision.

We supply a wide assortment of sensor cables and systems to monitor grain and pulse in silos and flat bins. Applications: • Flour, feed, and oil mills • grain hotels, grain storage silos, grain terminals We supply: • All-In-One sensor cable: Temperature, grain moisture, CO2 (infestation), headspace humidity • Temperature sensor cable • Moisture sensor cable • CO2 sniffer cable for infestation monitoring • O2 sniffer cable • Plenum pressure sensor • Early warning fire sensor probe • Rotary paddle level sensor • Bin auditor radar for inventory management • Weather station • VOC sensor cable (volatile organic gasses) The sensor cables are tailor made for your need - and we supply monitoring systems and software to make the data available for you either via iGRAIN Control Board or any PLC/SCADA system. Combined with iGRAIN software we also offer automatic aeration control incl roof vent control and Inventory management. Video: https://vimeo.com/902951917

The iGRAIN CO2 Sniffer Cable detects any infestation activity like insects, fungi, mites etc immediately when the activity starts. The increased use of Phosphine fumigation and with longer exposure times is damaging for all types of CO2 and moisture sensors because Phosphine (PH2) is a very aggressive gas. For a long time, there has been a demand for a technology that copes with this issue. iGRAIN has developed a sensor that comes with this challenge, so fumigation is not spoiling the sensors. <b>Advantages</b> • Earliest possible infestation warning • iGRAIN Risk Factor classification of each silo (0-6) • Quantifies the level of infestation in the entire silo • Efficient to avoid Aflatoxins, Mycotoxins and Fumonisins • Connects with the iGRAIN Smart App • Alerts about insects and fungi in the daily report • Only one sensor cable is needed per silo • Part of the AIO family of sensor cables

Monitoring grain in flat storage facilities has many challenges, but with the iGRAIN AIO Floor Sensor you are well equipped: The AIO Floor Sensor is embedded in the concrete floor, thereby making it easy for machines to move the grain without damaging them. The sensors monitor: • CO2 for early infestation control • both humidity and temperature for grain moisture control Advantages: - Receive reports with the TRUE grain condition - Follow the development in real time in your iGRAIN Smart App - Receive an AI based calculation of longest possible SAFE storage time - No manual labour required - You can freely move the grain around without the front loaders getting obstructed by cables/spears and causing damage to the sensors.

This self-calibrating CO2 sensor measures CO2 as well as temperature, relative humidity and ambient light conditions. It needs a 24 VAC supply voltage. This sensor can also directly control an EC-fan, AC fan speed controller or frequency inverter. It has 1 single analogue / modulating output depending on the highest measured value for temperature, humidity or carbon dioxide. If you only want to use it for measuring CO2, you can deactivate the temperature or humidity measurement. The FCMFX-series are available for different types of supply voltages such as 24 VDC, 24 VAC/VDC or 230 VAC. All version have 3 LEDS on the frontpanel showing whether the measured value is within or out of range. Additionally they are available in a version with audible alert. All parameters are accessible via Modbus RTU. This sensor doesn't need to be configured. Once installed it's ready for use.

Do you need to know what’s going? Be sure you do! We have the right sensors to help you so you know what’s going on… Have a look at the different sensors Quality4Food has to offer. For The Netherlands we supply high precision sensors for: O2, Co2, N2, Brix, Plato, Density, Alcohol, and so on, have a look at our sensor page. Outside The Netherlands contact us as well and we forward your request to the local agent.

Enserve is offers “total solution” of ATON (Aids to Navigation) Products and Services to complete your needs. Many project experiences in Middle East, Africa, South American, Asian countries. Buoys in all categories -Materials (Aluminum, Steel, Stainless, Plastic) -Functions (Lighted, Spar, Observation, Swift Current, Lanby, Chain, Deep Ocean) -Sizes (Diameter from 0.7m to above 10.0m) -Sensors (DGPS, Current, CO2, Waves etc.) Beacons, Lanterns, and Sensors -functions very from lighting to meteorological measurement. -Stand alone models by solar panel with Japanese reliable batteries (product life for min 6~10years) -User friendly features (easy to install and setup by the end user) Engineering research services (data collection, analysis, and solutions) -Safety -Environmental Protection -Efficiency -Rescue and Disaster Prevention -Preliminary investigation for maritime projects

The CO2 Multi-Sensor System is designed to detect Carbon Dioxide (CO2) levels in the ambient air to protect employees, workers, and establishments. Because high concentrations of carbon dioxide in confined spaces are dangerous and may lead to negative health problems - the CM-7000 system ensures that you and your employees are safe and protected. Should an incident occur, you can rely on the CM-7000's ability to trigger an exhaust fan or send an immediate alarm to the fire department or monitoring company. This system features both audible and visual alarms as well as the ability to configure sensors independently including the 3 relays that are triggered at 5,000 TWA, 5000 ppm, 1.5% CO2, and 3% to meet OSHA/NIOSH standards including local fire codes Users may configure modules (sensor, horn/strobe, and key switch) from the main CM-7000 tablet either in direct connection or through daisy-chaining modules together.

The NDIR bundle CO2 is a set of perfectly matching components for the gas analysis of carbon dioxide and offers research teams, institutes and laboratories the right solution for the demand of short term required IR components in small volumes. Micro-Hybrid is combining a NAC-based IR emitter with reflector of the JSIR 350 series with the highly sensitive thermopile dual detector of the MTS 2 SENS series. The narrow band filter of the dual detector is optimized to absorb carbon dioxide (CWL: 4265 ± 25 nm / HBW: 120 ± 10 nm) and has an additional reference channel (CWL: 3910 ± 28, HBW: 70 ± 10 nm). Designed for use in research projects in the fields of cell growth, plant cultivation or industrial gas measurement, our NDIR bundle CO2 provides developers with immediate results in gas analysis.

The narrow band filter of the MPS2SENS carbon dioxide with a CWL of 4265 ± 25 nm and a HBW of 120 ± 10 nm is optimized for the measurement of carbon dioxide (CO2) with reference channel (CWL: 3910 ± 28, HBW: 70 ± 10 nm). The detector suits for demanding applications in medical, industry and environmental technology. With its very high read-out rate of up to 100 Hz and a short response time, it provides precise measurement results reliably and quickly. The pyrodetector MPS2SENS carbon dioxide is based on 2 chips with a thin film CPM membrane. Thanks to the Ceramic Pyroelectrical Material (CPM) the detector features a very high detectivity of up to 4.0*10^8 cm√Hz/W and sensitivity of up to 200000 V/W. The signal quality of our pyroelectric sensors is unchallenged. The detector operates within ambient temperatures ranging from -20 to 85 °C and covers a wide range of applications: NDIR gas analysis, industrial process and exhaust gas measurement, and respiratory gas monitoring.

Off gas analysis in bioprocesses delivers important informatione about respiratory activity like CTR from which actions for process optimization and scale-up can be deduced from. The BCP-CO2 analyzer with PA housing will help you to understand and control your processes better. The CO2 analyzer BCP-CO2 services for application in fermenters and bioreactors of any scale. No matter if you are working in big stainless steel tanks, shake flasks (using PES adapters) , disposable, single-use or parallel reactorsthe BCP-CO2 PA is easy to install, doesn´t need much maintenance and offers an integrated, automatic pressure and temperature compensation. BCP-CO2 PA measures directly in the process. Additional pipes are not necessary.

The NDIR emitter kit made by Micro-Hybrid is a set of the most frequently used IR-emitters of the JSIR 350 series and a CO2 IR-detector of the MTS 200 series ith this set you get a possibility to order smaller quantities available at short notice and evaluate our products or test different combinations of components in your measurement system. This set may also help you to design your setup. Our bundle can otherwise come into use for educational purposes on colleges and universities for electronic and measurement applications training or single use assemblies for bachelor or master theses. In Addition engineers may use it for testing different set ups and preseries products or prototypes.