Compression seals - Import export

FE-S1 Compression seal - silicone seal - suitable for blunt connections - for sealing joints up to 10mm distance silicone seals - silicone sealing profiles, suitable for indoor and outdoor installations - made of permanently elastic silicone, age-resistant, permanent sealing property - emission-free and conservation tested - certified to British Museum Standards, Oddy tested - 60 Shore A

- Size 150 - 200 - 250 - 300 - 350 - 400 - 500 - 600 - 700 - 800 mm - One-piece valve body in carbon steel or AISI 304 - Square section packing seal, compressed between two stainless steel profiles held in place by two aluminum flanges that allow easy access, maintenance and adjustment of the packing, even with the valve installed - Invitation hopper for the passage of the product - Given its compact and robust structure, it is also suitable for heavier applications with materials such as gravel, sand and coal - ATEX certified version upon request - Pneumatic, manual or motorized actuators

We seal your housings, control cabinets or lighting units, apply adhesives or cast electronic components. In addition to the proven, high-performance 2-component PUR seals (FIPFG), we cover other important areas of application for our customers by applying homogeneous 1-component seals. For example, if your application requires higher temperature and/or chemical resistance or may be less compressible than a foamed seal. Our one-component, elastic solutions are also used for electrically conductive seals. We dose silicones, polyurethanes or MS polymers in liquid, unreacted form directly onto your component. True to contour on the smallest geometries, extremely adhesive and durable. Perfect sealing – sealing, gluing, casting directly on the component. Absolutely true to the contour and directly onto your component. We enable our customers to do this in series thanks to state-of-the-art dosing systems.

The sealer mod. DZ 800 W is a multifunctional machine for of large dimensions. Without limitation caused by the size of vacuum chamber, this horizontal vacuum packaging machine has very wide application range. Built in stainless steel. The vacuum pump 20 m³/h allows for high production. The sealing bar (or the sealing bars depending on the model chosen) with width 10 mm and closing with compressed air ensures a perfect seal on any type of material also very thick. The intake system with nozzles allows the use of any type of smooth or embossed envelope (NO BELLOW). The closure of the bars is through a dual button command (dual control security). When you have to pack flours or products that could make some dust, it is absolutely recommended to install the dust filter to avoid damaging the vacuum pump (main part of the machine) Similarly, we recommend installing the filter for liquids when you need to vacuum-pack products such as sauces or tomato purée.

VERTICAL VACUUM SEALING MACHINE FOR BAGS - ALSO WITH MAP GAS INLET The sealers mod. DZQ 600 LS/DZQ 800 LS are multifunctional machines suitable for sealing and vacuum packing large bags and sacks, also in MAP (with technical gas injection). The vacuum pump of 20 mc./h. it minimizes air intake times and the machines are equipped with valves for the injection of inert gas for packaging in a modified atmosphere. The double sealing bars with a width of 10 mm. and compressed air closure ensure perfect sealing on any type of material, even of high thickness. The bars are closed by means of a double button command (dual safety control). The sack support surface is adjustable. Thickness max. bag mm. 0.20 (0.8 total with bellows) By means of selectors and potentiometers it is possible to set the "sealing", "empty time" and "gas injection time" functions. The machine is equipped with two nozzles which, when the vacuum option is activated, descend into the bag and perform suction.

We seal your housings, control cabinets or lighting units, apply adhesives or cast electronic components. In addition to the proven, high-performance 2-component PUR seals (FIPFG), we cover other important areas of application for our customers by applying homogeneous 1-component seals. For example, if your application requires higher temperature and/or chemical resistance or may be less compressible than a foamed seal. Our one-component, elastic solutions are also used for electrically conductive seals. We dose silicones, polyurethanes or MS polymers in liquid, unreacted form directly onto your component. True to contour on the smallest geometries, extremely adhesive and durable. Perfect sealing – sealing, gluing, casting directly on the component. Absolutely true to the contour and directly onto your component. We enable our customers to do this in series thanks to state-of-the-art dosing systems.

4-column, servo-controlled station groups Needle bearing toggle system Cooling water flow control system Max stroke upper/lower 150 mm Lubrication system for each bearing Easy mould damping (with Locking System) Support piston upper and lower group Upper group spacing system (Positioning block parallelism) Ability to work with frame or press in upper and lower press Servo controlled seal system Compression force 70 tons

4-column, servo-controlled station groups Needle bearing toggle system Cooling water flow control system Max stroke upper/lower 150 mm Lubrication system for each bearing Easy mould damping (with Locking System) Support piston upper and lower group Upper group spacing system (Positioning block parallelism) Ability to work with frame or press in upper and lower press Servo controlled seal system Compression force 60 tons

Brass 1/4 turn meter tap CW614 / 617 MAIN FEATURES - Brass body - Prison nut secured by a hole for sealing wire - HDPE side sealed by compression and secured by a hole for sealing wire - A.C.S. certified product

Cost effective installation and dismantling with only a few tie-rods Compensates for axial displacement of the pipe during installation and dismantling as the telescopic action between the inner and outer flange body allows for longitudinal adjustment Designed with a gland ring to apply compression on the seal Standard total axial adjustment of 50mm (+/- 25mm) Flange adapter and follower (gland ring): ≤ DN300 GGG ≥ DN300C-steel S275JR F-piece: C-steel S275JR Flange adapter: raised face and reduced bore F-piece: raised face and full bore. Fusion bonded epoxy coating RAL5015, min 250 mμ Optionally with studs, nuts and tie-rods of stainless steel A2 or acid-resistant stainless steel A4

Forms a compression weather seal. For preventing electrolytic corrosion. For reducing heat transfer to Polyethylene film in horticultural cloche assembly and repair. For forming a make or break seal.

Multilayer construction of expanded graphite with Inconel reinforcement Practical useful application data: max. temperature in oxidizing atmosphere: +450 °C Characteristics Universal suitable, rectangular preformed Sealing tape of expanded pure graphite with Inconel reinforcement Recommended gap width 0.5 mm, maximum gap width 1.0 mm Excellent adaptability on different housing forms and ovality Excellent transformation of axial compression into radial sealing force Operating range Temperature: t = -200… +650 °C pH: 0 - 14 Practical useful application data: max. temperature in oxidizing atmosphere: +450 °C Main application Fittings Valve pressure rings Suitable for Power plant Boiler houses Recommended minimum surface pressure at assembly 20 N/mm 2 Brettschneid Tape Form of delivery 5 x 12 mm in 1 kg Spool approx. 14 mtr 7.5 x 15 mm in 2.5 kg Spool approx. 18.5 mtr 10 x 15 mm in 2.5 kg Spool approx. 14 mtr 15 x 30 mm in 5 kg Spool approx. 9.5 mtr 19 x 30 mm in 5 kg Spool...

Application specific ring sets Improved properties are: Extrusion resistance, if high pressures have to be sealed and/or bigger gaps than the normally recommended max of 25 of the packing size are found. Wiper function, if any micro scaling is found on the stem and at reciprocating movement with control valves Blow out safety, when sealing high compressed gases and fumes Pliability, with low gland forces as well good reset and adaptability for example in applications with temperature cycles. Ring Set 3335 For Control Valves up to 400 °C. Ring Set 6655 For Control Valves and staem applications up to 600 °C steam. All rings are delivered as standard in skive cut. Ring Set 6660 For Valves up to 650 °C steam. This ringset offers minimal volumeloss. The rings in the sealing zone are split as standard in 2 halves or as option delivered with a skive cut. Top and bottom ring are delivered with skive cut. Soot Blower Ring Set For soot blower applications with steam temperature up to...

Cable conduits made of PE-HD with plug-in sleeve Manufactured acc. to DIN 16876 Standard design: Sleeve type: integrally moulded plug-in sleeve (SM) Sealing ring: compression lip sealing ring, type “SX” (inserted in the factory) Sharp end: with plug-in depth marking and chamfer Length: 6 m Colour: black Inner surface: smooth Possible designs: Quality: DIN 16874 Length: 1 m to 6 m Coloured stripes: co-extruded Colour: on request Outer surface: coloured co-extruded or solid dyed Inner surface: inner grooves for reducing the cable pull-in forces Labelling: acc. to customer specifications

Cable conduits made of PP with plug-in sleeve Manufactured acc. to DIN 16878 or prEN 14285 Standard design: Sleeve type: integrally moulded plug-in sleeve (SM) Sealing ring: compression lip sealing ring, type “SX” (inserted in the factory) Sharp end: with plug-in depth marking and chamfer Length: 6 m Colour: black Inner surface: smooth Possible designs: Length: 1 m to 6 m Coloured stripes: co-extruded Colour: on request Outer surface: coloured co-extruded or solid dyed Inner surface: inner grooves for reducing the cable pull-in forces Labelling: acc. to customer specifications

refrigerator door rubber seal strip This flexible rubber strip is an ideal material for sealing and edging applications. It is easily cut with a knife and will stick to most surfaces using contact adhesive A139 or A262. Sizes stated are width by thickness. Roll size = 5 metres (which may be made up of more than one length). This white flexible food quality rubber strip is ideal for sealing and edging applications, especially where temperatures go to 200°C. It is easily cut with a knife and can be bonded in place with either S137 or S138. Roll size = 5 metres (which may be made up of one or more lengths) This semi soft rubber (45°sh) is flexible and semi compressible. It is used for sealing Brass port lights and vents. For plastic and Aluminium port lights it is recommended to use an expanded neoprene seal. Size stated are width by thickness.

This flexible rubber strip is an ideal material for sealing and edging applications. It is easily cut with a knife and will stick to most surfaces using contact adhesive A139 or A262. Sizes stated are width by thickness. Roll size = 5 metres (which may be made up of more than one length). This white flexible food quality rubber strip is ideal for sealing and edging applications, especially where temperatures go to 200°C. It is easily cut with a knife and can be bonded in place with either S137 or S138. Roll size = 5 metres (which may be made up of one or more lengths) This semi soft rubber (45°sh) is flexible and semi compressible. It is used for sealing Brass port lights and vents. For plastic and Aluminium port lights it is recommended to use an expanded neoprene seal. Size stated are width by thickness.

The Round Lead Seal is designed with two parallel holes and a knot chamber. During fitting the wire or string is threaded through the two parallel holes and crossed inside the knot chamber before closing with the sealing tool to prevent slippage. The LS31F Seal Cross-hole Lead Seal is designed so that the lashed wire is crimped together when the seal is compressed with the sealing tool. The effect of crimping the lashed wire together alleviates any chance of twisting the wire out of the hole without leaving clear evidence of tampering. To optimize security the sealing tool dies can be engraved to emboss or deboss characters /numbers/logo onto the seal so giving reference to the application user. Recommended applications Gas, Water & Electric meters, Drums, Valves, Refineries, Post Bags, Cages, Lockers. Material 99.9% Pure Lead ** Click for more **

Functions: 1. Compressed mattress to an 9:1 ratio of volume 2. Heat sealing 3. Mattress compress into a flat-pack 4. Roll-pack the compressed mattress 5. Adjustable exit diameter Description This new mattress rolling machine is designed for packaging different type of mattresses. It can roll-pack pocket-coil spring/bonnel/foam/latex mattress etc.

VPSL series bellows-sealed scroll-type dry scroll vacuum pump is a completely oil-free and clean vacuum pump, having a pumping speed of 12m3/h(7CFM), 16m3/h(9CFM), and 36m3/h(20CFM). It adopts the most advanced bellows isolation structure in the world to completely isolate the compression chamber and the bearing. It also uses fewer bearings to make the pump quieter and more reliable. At the same time, it can extract non-corrosive organic solvents and has a stronger water vapor processing capacity. The VPSL bellows-sealed scroll-type dry scroll vacuum pump is equipped with an independent controller, which makes the pump more intelligent, and can realize the operation of speed regulation, current limiting, and voltage stabilization of the pump according to the end user's process. Due to the scroll compression and tip seal structure, the pump is not suitable for pumping flammable, explosive, highly corrosive, and particle-containing applications.