Concrete formwork benches - Import export

This Pack consists of 40 x painted steel modular formwork panels 1.50 m x 1.00 m 4 x painted steel modular formwork panel 0.60 x 1.5 m 4 x painted steel modular formwork panel 0.60 x 1.5m 8 x painted steel modular formwork panel 0.40 x 1.5 m 8 × Offset 150 x 10 cm 8 × Offset 150 x 5 cm 2 × GP10 lifting hooks 4 x Inside angle H: 1.5m, 0.30x0.30 m 60 × Tightening rod 750 cmm DW15 + 2 nuts DW15 112 × Single GP10 Alignment Flanges 8 × Variable angle flanges GP10 16 × GP10 Variable Alignment Flanges 2 x 120x80 accessory boxes

10 x modular painted steel formwork panels 3m x 2m 20 × Single or variable GP10 alignment flanges 20 × Tightening rod 750 cmm DW15 + 2 nuts DW15 2 × GP10 lifting hooks 5 × Double push pull props GP10 5 × Service consoles with blockers 1 x Inside angle H: 3m, 0.30x0.30 m 1 x painted steel modular formwork panel 0.60 x 3m 1 x painted steel modular formwork panel 0.50 x 3m 2 × Compensation 3000 x 100 mm 2 × Compensation 3000 x 50 mm 3 × Variable angle flanges GP10 8 × GP10 Variable Alignment Flanges 1 x Accessory box 120x80

This pack consists of -20 x painted steel modular formwork panels 3m x 1m - 40 × GP10 single or variable alignment flanges - 33 × Tightening rod 750 cmm DW15 + 2 nuts DW15 - 2 × GP10 lifting hooks - 5 × GP10 double push pull prop - 5 × Service consoles with blockers - 1 x Inside angle H: 3m, 0.30x0.30 m - 1x of modular painted steel formwork 0.60 x 3m - 1 x painted steel modular formwork panel 0.50 x 3m - 2 × Compensation 3000x100 mm - 2 × Compensation 3000x50 mm - 3 × Variable angle flanges GP10 - 8 × Variable alignment flanges GP10 - 1 x Accessory box 120x80

This pack consists of - 20 x modular painted steel formwork panels 3m x 1m - 40 × GP10 single or variable alignment flange - 33 × Tightening rod 750 cmm DW15 + 2 nuts DW15 - 2 × GP10 lifting hooks - 5 × GP10 double push pull prop - 5 × Service consoles with blockers

This pack consists of 20 x painted aluminum manual formwork panels 3m x 1m 40 × GP10 single or variable alignment flange 33 × Tightening rod 750 cmm DW15 + 2 nuts DW15 2 × GP10 lifting hooks 5 × Double push pull props GP10 5 × Blocker consoles

KBC, specialist in the sale of modular formwork, and manual formwork, can renovate your formwork panels. We can renovate your Jean Four eurobress formwork, your PERRI formwork, your DOKA formwork, your DEKO formwork, your COFFERCO formwork and all brands of formwork.

9 × Kit of trusses + support + connection 9 × STEEL formwork panel GP10 3m x 1m 8 × GP10 single or variable alignment flanges 2 × GP10 lifting hooks 4 × Service consoles with blockers 2 × Compensation 3000 x 50 mm 3 x painted steel modular formwork panel 0.50 x 3m 1 x Accessory boxes 120 x 80

Safety pack comprising for 10 m / l of 3mx1m or 3mx2m formwork: 6 Steel floors 0.33 x 2.00m 1 Steel / wood floor 2 m with access ladder 8 Galva steel tubes 3 m

KBC Diffusion, specialist in the sale of formwork, offers you the SATECO formwork panel range in New but also in used products.

The KBD Diffusion team listens to its customers and has experience in recommending building equipment and offers you custom-made metal plates. 20 mm thick, they are sized to the size of your formwork panels, whatever their brand: SATECO, OUTINORD, HUSSOR, COSMOS, DEKO ... They are equipped with tightening nuts corresponding to the dimension of your rods. Thanks to their lifting ances, they are easy to crane and move. They can be delivered with an alignment angle fixed to the side of the sheet of your choice to facilitate their alignment. These sheets allow you to quickly cast your expansion joints without wasting cardboard and polystyrene. They make it possible to gain flexibility while maintaining high pouring rates. In addition, thanks to these expansion joint sheets, you can use the concrete of your choice and the pouring technique that best suits your site.

Discover the versatility of circular formwork for the construction of circular concrete walls with or without clamping points. With this innovative circular formwork for concrete for radii from 3 m, you can efficiently realise construction projects such as biogas plants, silos, tunnel entrances, storage basins, sewage treatment plants, adventure pools, towers or stairwells.

Customised concrete formwork offers an individual solution for modern construction projects that require a high degree of flexibility and efficiency. These customisable, adaptable formworks are tailored specifically to the requirements of different construction projects.

Discover the versatility of circular formwork for the construction of circular concrete walls with or without clamping points. With this innovative circular formwork for concrete for radii from 3 m, you can efficiently realise construction projects such as biogas plants, silos, tunnel entrances, storage basins, sewage treatment plants, adventure pools, towers or stairwells.

The shoring frames TG 60 are made of steel tube of higher strength and are stiffened with 2 small diagonal braces. To transfer tensile forces, every frame is secured by hinged pins, locking pins or bolts to each other. In this way the towers can be assembled on the ground and placed by a crane. The shoring frames TG 60 are designed symmetrically – because of that you don’t have to care about the direction of the diagonal braces.

Our slab edge formwork is made up of three components: bracket, hook headed bolt connection and stop. In addition to slab edges, with and without overhangs, the slab edge formwork (bracket) can also be used for forming floor slabs.

With its robust but lightweight steel frame, the e-deck can be used anywhere a crane cannot reach. All of our e-deck formwork is compatible with our Modular universal formwork. That means that connections and transitions between wall and slab or beams can be created without difficulty.

Circular Formwork with adjustable radii for waste water treatment plants, reservoir construction, water parks, towers, stairwells, garage entrances, gardening and landscaping. - For fair-faced concrete - perfect concrete finish (no bolt impressions) - Infinitely adjustable for diameters from 5 meters to infinity - Only 0.28 - 0.55 ties/m² - Delivered ready to use to the construction site - Integrated crane lifting clamps - Perfectly round and with exact dimensions - System solutions for haunch girders and uneven surfaces

The Modular/GE Universal Formwork has really earned its name, because this system is used all over the world on many different building sites where it demonstrates its versatility, adaptability and flexibility, for foundations, walls, shafts, round walls, columns or beams. The degree of difficulty of the structures to be build can vary considerably, because the balanced range of panels means that the formwork can be adjusted ideally to all layouts and cross sections. The size of the structures to be build does not matter: small surfaces are not a problem for the Modular panels. And as far as large sizes are concerned, preassembled Modular panels can stay together as units or are supplemented by larger GE panels, with unlimited compatibility.

The flexible slab formwork is ideally suited for ceilings in residential and industrial construction due to the optimal adaptation to any floor plan, the possibility of using any slab thicknesses and the lightweight individual parts. With only three main components, the formwork system also impresses with optimised material deployment.

The multifunctional working-platform Multip by PASCHAL has proven to be one of the most efficient and most highly-safeguarded systems for work platforms on formwork. If you combine the PASCHAL formwork systems with Multip, this complete system comprising both formwork and scaffolding provides even better forming times, combined with the necessary working safety.

Reliable lateral protection according to safety standard EN 13374 - For a variety of applications (wall formwork, slab formwork, window and door openings, concrete slabs and exposed slab edges and upper wall edges) - Quick, easy assembly - According to safety standard EN 13374 - Use with a protection fence or wooden planks is possible A key element is the railing post lateral protection, which can be used for a range of applications when combined with various connecting parts. Thanks to the flexible application of the lateral protection system, you will save on investment and storage costs.

PASCHAL Dam bracket is used wherever single-sided climbing is required, for example for reservoir dams, port and harbour constructions, lock-up constructions in inner city projects and refurbishment measures. The formwork panels can be tilted in fully variable positions on the dam brackets in both directions, allowing for ideal adjustment to the full range of wall slopes and wall abutments. All working platforms remain horizontal while the formwork is tilted.

The climbing platform KBK, folding is a working and climbing scaffold which is supplied to the building site ready assembled. After erecting the guard railing post and unfolding the platform, KBK is ready to use and can be dropped into the clevis shoe using the crane.

PASCHAL climbing systems – the complete solution for safe and economical climbing. The climbing units consist of rigid or slidable climbing brackets, adjustable props for supporting the formwork, boards, railing and possibly suspended scaffolds.

It supports the efficiency and cost effectiveness of climbing systems in adjusting flexibly to the structure geometry and in permitting larger formwork units. With the climbing bracket 240 PASCHAL wall formwork systems can be also used as climbing formwork. This is especially an advantage for building a structure in several height phases. A complete climbing unit consists of climbing platform (bracket + planking), formwork, concrete and suspended scaffold and can be moved with only one crane cycle. Hereby efficient and economic work sequences can be achieved.

Circular Formwork with adjustable radii for waste water treatment plants, container construction, water parks, towers, stairwells, garage entrances, gardening and landscaping. Advantages of clamp connection: - Less connecting pieces - Fast segment connection - Clamps can be “stored” at the segment - Stepless segment positioning with height offset

Circular Formwork with adjustable radii for waste water treatment plants, container construction, water parks, towers, stairwells, garage entrances, gardening and landscaping. - Infinitely adjustable for diameters from 2 - 5 meters, and 5 meters to infinite - Only 0.28 - 0.55 ties/m² - Delivered ready to use to the construction site - Perfectly round and with exact dimensions - System solutions for haunch girders and uneven surfaces - Compatible with all PASCHAL systems

The tie points for the one-sided tie rod equipment can be operated by just one person - this guarantees optimised working even with less manpower requirements and in confined spaces. The new system has the particular advantage of being able to be anchored either on one side or conventionally, depending on requirements.

The adjustable modular column formwork by PASCHAL is a steel frame formwork whose elements are assembled according to the so-called windmill principle. With four elements each square and rectangular column cross-sections can be formed in the adjustment range of 20 cm to 50 cm in increments of 5 cm.