Cutting oils - Import export

High quality, fully synthetic cutting oil for cutting, milling and drilling of all FE and NE metals. It offers very good corrosion and wear protection and can be utilized for high cutting speeds and long service life.

antislip flooring thanks to its profiled surface compliant with DIN E 51130: R10 keeps the workstation always clean and dry thanks to its grating structure very good resistance to chemicals and oils easily cut with a cutter for perfect adaptation to the configuration of the premises good temperature resistance yellow marking possible on request for better signage good UV resistance

The IKO Super Flexible Nozzle is a compact nozzle used on machine tools to supply and spray cutting oil exactly at a specified location. Since the angle of the nozzle can be easily changed, the oil supply can be concentrated on the working area, and cooling and lubrication can be performed effectively. As a result, cutting resistance is reduced and superior finish is obtained, achieving high machining accuracy. The tool life can also be extended, which can result in cost savings. The Super Flexible Nozzle can be used at the spindle end of machining centers and at the tool holder of an NC lathe.

Drop lubrication of cutting tools at machining work on ferrous and non-ferrous metals, for example during drilling, thread cutting, sawing, milling, punching and nibbling Advantages and benefits Reduces friction and required force Permits high continuous load and higher cutting speeds Allows optimal cutting surfaces Extend tool lives through reduction in wear Neutral behaviour toward machine coatings Free of chlorine and heavy metals Low tendency to form oil mist OKS 390 is suitable for use with the OKS Airspray system Also available as spray version OKS 391Apply a sufficient quantity of OKS 390 to the tool or machining point using a brush, drip oiler or oil can. Spray on sufficiently OKS 391 spray. After use OKS 390 can be removed with OKS 2610/OKS 2611 universal cleaner. Caution: Check compatibility before using on non-ferrous metals.

Drop lubrication of cutting tools at machining work on ferrous and non-ferrous metals, for example during drilling, thread cutting, sawing, milling, punching and nibbling Advantages and benefits Reduces friction and required force Permits high continuous load and higher cutting speeds Allows optimal cutting surfaces Extend tool lives through reduction in wear Neutral behaviour toward machine coatings Free of chlorine and heavy metals Low tendency to form oil mist Apply a sufficient quantity of OKS 390 to the tool or machining point using a brush, drip oiler or oil can. Spray on sufficiently OKS 391 spray. After use OKS 390 can be removed with OKS 2610/OKS 2611 universal cleaner. Caution: Check compatibility before using on non-ferrous metals.

INOX Slide and Bed Track Oils INOX Spray Oils INOX Compressor Oils INOX Formwork Oils INOX Cutting Oils INOX Grinding Oils

It is qualified oil that is formulated with quality base oils obtained through modern refining processes. It is used in cutting and forming processes of metals containing or not containing iron in oil base formulations. It exhibits extra resistance against high pressure in cutting, broaching, penetrating, grinding and scratching processes through Sulphur chloride it contains.

Maximally hydrated, perfectly smooth cuticles and healthy nails. A product intended for professional and daily care, which improves the appearance and condition of the cuticles, while at the same time strengthening and giving shine to the nails. It provides optimal care for dry and damaged cuticles and weak, brittle nails. The oil intensively moisturizes the delicate cuticles around the nail, prevents them from tearing and growing on the nail plate. It can be applied with or without a manicure.

It is engineered to provide outstanding performance and outstanding protec­ tion in the most demanding heavy duty diesel engines designed far natural aspirated or turbocharged high-speed. Far the main factors that damage the engine in active-duty high-mileage vehicles, thanks to its improved formula­ tion, it provides superior protection through effective anti-wear, and anti­ corrosive properties. it minimizes oil consumption without reducing the constant oil pressure with cutting strength that protects viscosity in all conditions. it reduces maintenance costs by providing excellent protection in multi-kilometer vehicles operating in active densities. Detergent dispersant feature prevents deposit formation and provides superior engine protection.

Use 18 Bar Dry Air systems for laser cutting benches. Get rid of your nitrogen gas costs for cutting. Very high costs are paid for quality cutting in laser machines. With the 18 Bar Dry air system, you can get rid of tube and transportation costs. With the 18 Bar Dry air system, you can put an end to your tube purchase costs. With the oil-free pneumatic Booster, oil-free and dryness can be guaranteed in the cutting air. Thanks to the Activated Carbon Towers and Chemical Dryers used in the system, continuous measurement is made and provides dry and oil-free air flow.

Soluble Cutting Fluid is a high-quality, chlorine-free cutting oil enriched with borates. It is engineered to excel in light to moderate machining operations, covering a wide range of tasks such as boring, milling, drilling, tapping, threading, broaching, turning, reaming, and grinding. This cutting fluid is known for forming dependable and stable white emulsions with a generous “emulsion reserve.” It showcases remarkable resistance to bacterial degradation, ensuring a longer service life. Importantly, it contains no free phenolics or nitrites. Additionally, it exhibits minimal foaming tendencies when applied in various machining applications, making it a reliable choice for precision operations.

PRODUCT DESCRIPTION Premier 15W/50 SM sets the gold standard for engine protection and performance, tailor-made for both professional workshops and home servicing enthusiasts. This engine oil boasts premium quality, harnessed through cutting-edge synthetic technology base oils. It not only meets but surpasses the stringent API SM/CF specifications, making it a versatile choice for most petrol and four-stroke diesel engines. This includes engines with tight tolerances and those subjected to the harshest and most diverse operating conditions, ranging from scorching high-temperature motorway cruising to chilly stop-and-go city driving. One of Premier 15W/50 SM's standout features is its exceptional suitability for cold starts, owing to its remarkable low-temperature fluidity characteristics. Moreover, it upholds engine cleanliness across all service conditions, thanks to its well-balanced levels of dispersant and detergent additives.

PRODUCT DESCRIPTION Synplus 10W/50 SN stands as a full synthetic, low SAPS (Sulphated Ash, Phosphorus, and Sulphur), super high-performance engine oil. It represents the cutting edge of oil formulation and additive technology, offering the highest level of engine protection. Today’s environmentally conscious market has led to an increased demand for reduced emissions and improved fuel efficiency. This shift has driven the development of new engine designs, consequently raising the bar for lubricant quality. In recent years, car manufacturers have responded to stricter fuel economy regulations by developing smaller, higher-output engines. While these smaller engines contribute to reduced vehicle weight and enhanced fuel economy, they pose particular challenges for lubricants:

PRODUCT DESCRIPTION Synplus SN/CF 5W/40 is a top-tier, full synthetic engine oil featuring low SAPS (Sulfated Ash, Phosphorous, and Sulfur) content, designed for super high performance. This advanced oil is the result of cutting-edge developments in oil formulation and additive technology, offering the highest level of engine protection. In today’s environmentally conscious automotive market, where reducing emissions and enhancing fuel efficiency are paramount, new engine designs have emerged, necessitating higher-quality lubricants. Smaller, higher-output engines, developed to meet stringent fuel economy standards, pose specific challenges to lubricants: • Increased Heat Output: Smaller engines generate higher temperatures, leading to accelerated oil oxidation, nitration, and deposit formation. These conditions degrade the oil and promote the formation of acidic compounds, which can result in increased viscosity.

Fleetmaster CK-4 Extreme 15W/40 stands as a formidable API CK-4 heavy-duty diesel engine oil, expertly crafted with cutting-edge synthetic technology-based oils. It’s engineered to meet the demands of high-speed, four-stroke diesel engines operating in severe conditions, including those equipped with Diesel Particulate Filters (DPF), cooled Exhaust Gas Recirculation (EGR), and other advanced exhaust treatment systems. This versatile oil is suitable for both turbocharged and naturally aspirated engines. What sets Fleetmaster CK-4 Extreme 15W/40 apart is its commitment to providing superior durability and protection. It accomplishes this through enhanced shear stability and reduced oxidative thickening, effectively mitigating issues like abrasive wear, bore polishing, and piston deposits.

PRODUCT DESCRIPTION SYNPLUS ACEA C2 PLUS 0W/30 stands as a premium, fully synthetic engine oil engineered to excel in the realm of high-performance vehicles. Crafted with a focus on combining cutting-edge oil formulation and additive technologies, this oil is tailored to meet the stringent ACEA C2 and Ford WSS-M2C950-A performance standards. This oil represents a pinnacle of protection for modern, low-friction engines found in high-performance cars, as well as diesel and gasoline-powered light vans. Notably, it champions both engine safeguarding and fuel efficiency. Designed for extended drain intervals, SYNPLUS ACEA C2 PLUS 0W/30 is a steadfast, stay-in-grade oil that plays well with catalytic converter-equipped car and light van diesel engines. These engines are designed to thrive on this low-viscosity, low-friction oil, featuring a high-temperature/high-shear rate (HTHS) viscosity of at least 2.9 mPa-s.

SYNPLUS ACEA C2 0W/30 stands as a cutting-edge, full synthetic engine oil with a low to mid SAPS (Sulphated Ash, Phosphorus, and Sulphur) composition, designed to meet the rigorous ACEA C2 performance standards. This super high-performance lubricant represents the pinnacle of oil formulation and additive technology, offering the highest level of engine protection while promoting fuel efficiency. It is tailored for use in modern low-friction engines found in high-performance cars, light van diesel vehicles, and gasoline-powered vehicles. Engineered to deliver stability and compatibility with catalyst systems, SYNPLUS ACEA C2 0W/30 is designed for extended drain intervals in car and light van diesel engines equipped with catalytic converter exhaust systems. These engines are optimized to effectively utilize this low-friction, low-viscosity oil, maintaining a high temperature/high shear rate (HTHS) viscosity of at least 2.9 mPa-s.

Synplus LL-12 0W/30 is an advanced, fully synthetic engine oil with mid SAPS (Sulfated Ash, Phosphorous, and Sulfur) content, specifically engineered for extended drain intervals and super high performance. This oil leverages cutting-edge oil formulation and additive technology to offer the highest level of engine protection, with a special focus on vehicles equipped with smaller engines susceptible to Low-Speed Pre-Ignition (LSPI) and those featuring catalyzed exhaust systems. Synplus LL-12 0W/30 is exceptionally well-suited for use in modern BMW turbo diesel engines and certain petrol engines that do not require particulate filters but demand BMW LL-12 FE performance. It’s also an excellent choice for a range of car and light van diesel engines with catalytic converter exhaust systems, designed to harness the benefits of a low-viscosity oil with a high-temperature/high-shear rate (HTHS) viscosity of at least 2.9 mPa-s.

PRODUCT DESCRIPTION Fast 4 JASO MA 20W/50 Semi Syn SL stands as a premium four-stroke motorcycle lubricant meticulously engineered to offer the utmost protection for your motorcycle. Its formulation harnesses a blend of cutting-edge synthetic technology oils and the latest advancements in additive systems to create a motorcycle lubricant that delivers unmatched value and protection. This exceptional lubricant not only meets but exceeds the API SL engine oil protection standard, affirming its commitment to safeguarding your engine’s performance. It also surpasses the rigorous clutch performance requirements of the Japanese JASO MA2 specification. The broad viscosity grade of SAE 20W/50 strikes a perfect balance diverse climate. It provides a thinner low-temperature viscosity for effortless start-ups during winter and a thicker high-temperature viscosity for superior performance and protection under the scorching summer sun.

PRODUCT DESCRIPTION Fleetmaster CK-4 Extreme 15W/40 stands at the forefront of API CK-4 heavy-duty diesel engine oils, harnessing the power of cutting-edge synthetic technology-based oils. It’s purpose-built to excel in demanding, high-speed four-stroke diesel engines equipped with Diesel Particulate Filters (DPF), cooled Exhaust Gas Recirculation (EGR), and other advanced exhaust treatment systems, catering to both turbocharged and naturally aspirated engines. This exceptional oil is meticulously engineered to provide superior durability and protection, achieved through enhanced shear stability, reduced oxidative thickening, and mitigated issues such as abrasive wear, bore polishing, and piston deposits. Fleetmaster CK-4 Extreme 15W/40 is a versatile choice, suitable for 2017 model vehicles and those complying with Euro VI emission standards. It can seamlessly replace CJ-4 engine oils, offering a convenient transition for users.

Lifting pumps series TAA gently pump foam-sensitive cooling lubricants (emulsions or cooling and cutting oils) or highly inflated cooling lubricants such as occur with a high degree of machining in lathing, milling or grinding. Impellers: axial Fluids: coolants, emulsions, oils Volumetric delivery: up to 440 l/min Delivery head: up to 9 m Please contact us for delivery quantity

Suction Pumps are self-priming following the initial priming, and operate according to the bypass duct principle. We recommend pump models featuring bronze body elements for pumping water without anticorrosion additives. The dimensions are based on standard specification EN 12157. Impellers: open Fluids: coolants, cooling/cutting oils, fuel oil, water (with anticorrosive additive) Volumetric delivery: up to 52 l/min Delivery head: up to 16 m Please contact us for delivery quantity

Quick suctioning immersion pumps equipped with the patented "BRINKMANN's Suction De-aeration System" are excellently suited to pumping extremely inflated fluids (emulsions resp. cooling/cutting oils) as they occur in heavy cutting when turning, milling or grinding. The quick suctioning immersion pumps reach stable working conditions as soon as the liquid level reaches the suction inlet. Volumetric delivery up to 280 l/min Delivery head up to 8,5 m Please contact us for delivery quantity

Quick suctioning immersion pumps equipped with the patented "BRINKMANN`s Suction De-aeration System" are excellently suited to pumping extremely inflated fluids (emulsions resp. cooling/cutting oils) as they occur in heavy cutting when turning, milling or grinding. The quick suctioning immersion pumps reach stable working conditions as soon as the liquid level reaches the suction inlet. The SAL serie offers a (SAE) flange with pressure gauge connection port. The flange can be rotated for either horizontal or vertical pipe connections. Volumetric delivery: up to 2600 l/min Delivery head: up to 115 m Please contact us for delivery quantity

Quick suctioning immersion pumps equipped with the patented "BRINKMANN`s Suction De-aeration System" are excellently suited to pumping extremely inflated fluids (emulsions resp. cooling/cutting oils) as they occur in heavy cutting when turning, milling or grinding. The quick suctioning immersion pumps reach stable working conditions as soon as the liquid level reaches the suction inlet. The STL serie offers a (SAE) flange with pressure gauge connection port. The flange can be rotated for either horizontal or vertical pipe connections. Volumetric delivery: up to 200 l/min Delivery head: up to 80 m Please contact us for delivery quantity

Horizontal End-Suction Pumps are centrifugal inline pumps with a compact design where the impeller is mounted onto the extended motor shaft. These pumps are not self-priming and must be gravity fed. All pumps are equipped with a single mechanical seal. Upon request a second mechanical seal is available to allow for dry-running (-GD). This pump series is designed for horizontal installations next to a tank and for pumping air entrained coolant fluids, such as water-soluble coolants or cutting oils, as they occur in high speed turning, milling or grinding applications. The SBA pumps are equipped with the user-friendly (SAE) flange connection which allows for either vertical or horizontal pipe connection and the connection of a pressure gauge with G 1/4. Volumetric delivery: up to 2200 l/min Delivery head: up to 62 m Please contact us for delivery quantity.

Horizontal End-Suction Pumps are centrifugal inline pumps with a compact design where the impeller is mounted onto the extended motor shaft. These pumps are self-priming after initial filling. All pumps are equipped with a single mechanical seal. SBM Pumps are mounted next to or on top of the tank and they are suitable for pumping air entrained coolant fluids, such as water-soluble coolants or cutting oils, as they occur in high speed turning, milling or grinding applications. Volumetric delivery: up to 440 l/min Delivery head: up to 20 m Please contact us for delivery quantity.

Vertical End Suction Pumps are centrifugal inline pumps with a compact design where the impeller is mounted onto the extended motor shaft. These pumps are not self-priming and must be gravity fed. All pumps are equipped with double mechanical seal. This pump series is designed for vertical installations next to a tank and for pumping highly air entrained coolant and cutting oils, as they occur in high speed grinding applications. The SBG pumps are equipped with the user-friendly 45 degree flange connection which allows for either vertical or horizontal pipe connection and the connection of a pressure gauge with G ¼. Volumetric delivery: up to 2250 l/min Delivery head: up to 62 m Please contact us for delivery quantity

“MOUNTAIN ROSE BULGARIA" Ltd. is a manufacturer and wholesaler of 100% natural raw materials. Our focus is on organic and natural products we deliver all over the world – from Bulgaria. We boast rich experience (being established for many years) in manufacturing and the export of dried organic and natural medicinal aromatic plants, herbal extracts (TBC, powder, chopped), seeds, essential oils, hydrolats ( flower waters ) , cold-pressed oils, absolutes, concretes, capsules. Today, the company boasts the image of a reliable and loyal partner, one of the main Bulgarian exporters. We trade with countries all over Europe, England, Australia, the USA, Japan, China, Singapore, New Zealand, among others. We have more then 250 tons of Dry Rosehp / Rosa Canina / and we can do for you on shell, powder from shell, powder from whle rosehip, seed, cut and cold press oil from seed or fruit. Alos, we can offer you frozen rose hips. We free to conntact us. We are at your disposal!