Development of sensors - Import export

Often, special requirements cannot be standardized. For this reason, we configure our sensors to your individual requirements. Modifications of the offset distance or measuring range, cable and connector variants and modifications to the housing and optical system are often required.

Reliable Partner for smart sensor and IoT (NB-IoT, BLE, WiFi) sensor development with best practices in Industrial and Automotive sensors. Our turnkey approach goes from selection of sensing element to connection to IoT platform.

The IST AG 150 °C Pt Temperature Sensor Series offers excellent long-term stability and fast response time with low self-heating within a temperature range of -50 °C to +150 °C. ​The sensors are developed with an insulated enameled Cu-wire, which enables easy integrating into applications. The insulation is additionally removed at the end of the wire to enable easy welding or soldering. Due to the small diameter of the enameled Cu-wire (Ø 0.2 mm), the temperature sensor is offered with extremely small dimensions (see "characteristics" for more information about small dimensions) and with long, directly welded wires. Furthermore, the 150 °C Pt Temperature Sensor Series can be customized to fit application-specific requirements e.g. wire lengths. ​The IST AG Pt temperature sensors up to 150 °C are also available with: — Metallized backside — Long insulated wires (enameled) — 2-, 3- and 4-wire configuration

The IST AG 150 °C Pt Temperature Sensor Series offers excellent long-term stability and fast response time with low self-heating within a temperature range of -50 °C to +150 °C. ​The sensors are developed with an insulated enameled Cu-wire, which enables easy integrating into applications. The insulation is additionally removed at the end of the wire to enable easy welding or soldering. Due to the small diameter of the enameled Cu-wire (Ø 0.2 mm), the temperature sensor is offered with extremely small dimensions (see "characteristics" for more information about small dimensions) and with long, directly welded wires. Furthermore, the 150 °C Pt Temperature Sensor Series can be customized to fit application-specific requirements e.g. wire lengths. ​The IST AG Pt temperature sensors up to 150 °C are also available with: — Metallized backside — Long insulated wires (enameled) — 2-, 3- and 4-wire configuration

The IST AG 150 °C Pt Temperature Sensor Series offers excellent long-term stability and fast response time with low self-heating within a temperature range of -50 °C to +150 °C. ​The sensors are developed with an insulated enameled Cu-wire, which enables easy integrating into applications. The insulation is additionally removed at the end of the wire to enable easy welding or soldering. Due to the small diameter of the enameled Cu-wire (Ø 0.2 mm), the temperature sensor is offered with extremely small dimensions (see "characteristics" for more information about small dimensions) and with long, directly welded wires. Furthermore, the 150 °C Pt Temperature Sensor Series can be customized to fit application-specific requirements e.g. wire lengths. ​The IST AG Pt temperature sensors up to 150 °C are also available with: — Metallized backside — Long insulated wires (enameled) — 2-, 3- and 4-wire configuration

With its small dimension and high sensitivity, the IST AG K5-W capacitive RH humidity sensor was developed for applications where an accurate measurement in low humidity ranges is required. The sensor is characterized by the outstanding stability in low humidity, very low drift and a high chemical resistance. With its excellent sensor characteristics, the K5-W is the optimal choice for low humidity environments. The humidity sensor is capable of measuring 0 % RH to 100 % RH (maximal dew point +85 °C) with a capacitance of 200 pF ±50 pF (at 30 % RH and +23 °C) and operates within a temperature range of -40 °C to +150 °C. Further advantages of the K5-W capacitive RH sensors include: — Fast recovery time — Very stable at low humidity — Condensation resistant — High chemical resistance — Very low drift — Wide temperature range — Customer-specific sensor available upon request

colorCONTROL ACS7000 is one of the most advanced inline color measuring systems in the world. Unlike conventional technologies, this system recognizes colors not just by comparing them to reference values, but also by using the reflection spectrum to ensure unique identification. Due to its very high measurement speed, the colorCONTROL ACS7000 is suitable for applications where colors and shades have to be examined on-the-fly and to very high accuracies. Due to the extremely high measurement accuracy, the system is also applied in laboratories, e.g. in industrial Research and Development. Different sensor models are available to suit various measurement tasks.

The newly developed sensor PROFIBUS module model 9221 is predestined for the integration of various analog sensor output signals into complex, net worked and peripheral automation structures. This module finds its fields of application in the industrial automation technology as well as the test rig technology based on its secure and reliable transfer mode, the fast transfer speed and its simple construction. The inputs (e.g. PLC signal gauge) and outputs in addition to the external control allow a zero compensation by trigger via proximity switch or fast alerting on passing of set point values. Industrial type connection and mounting techniques enable the user the adaption and integration in the existing mechanical and electrical environment. The excellent quality of measurement together with the high grade capture of mean values also enable the application in research and development. The use of standardized PROFIBUS protocols makes the connection an easy task for the programmer.

Another working area of the Suvis GmbH is the field of innovative sensor systems applied to particle and flow measurements taking into account microsystems. We develop novel flow and particle sensor systems for the application in environmental technology, process and mechanical engineering, and automotive technology. Important aspects are robustness and economicalness of the complete sensor system in order to create for the above mentioned application fields practical and affordable solutions. The respective sensor system will be developed as a whole solution. This means besides the hardware set up that we also take care of the evaluation of the sensor signals with our own solutions. We develop from scratch up to prototype level including periphery technology development. Please contact us for a not binding offer. We would like to know more about your challenge!

The company was established for the business purpose of developing and manufacturing complete products and parts of major medical devices such as gateways for chronic patients and medical Bluetooth communication modules, and is currently focusing on oxygen saturation measurement devices, which are essential measurement data for patients, and finally, it is jointly researching and developing transducers and ASIC chips, which are core components of ultrasound diagnostic devices, with Pennsylvania State University to develop original technologies for sensors and chips that go inside medical devices. It is a medical device & ultrasound technology development venture company that aims to take advantage of this not only in the domestic market but also in the global market in the miniaturized wireless ultrasound field. Currently, MTECOX-01 has obtained CE (MDD) and ISO13485 in the case of European medical device licensing and is in the process of being sold to Europe.

IRwin® Methane Leak Detector is an innovative, portable natural gas detector for easy gas pipe survey and gas leak detection. It is developed in accordance with many national directives, such as the DVGW (Deutscher Verband des Gas- und Wasserfaches) directive. The IRwin SX-models are certified for use in Zone 0, classification Ex II 1G, Ex ia IIC T3 Ga. The integrated proprietary infrared sensor system (patents pending) has a fast reaction and short recovery time. The system prevents false leak alarms and ensures correct and fast leak evaluation. The specially developed Gas Chromatograph (GC) and IR-sensor combination allows fast distinction between marsh gas and natural gas from all known natural gas sources. The IRwin GC gives fast test results, even at low ethane concentrations, from 1000 ppm methane leaks. IRwin is able to measure methane according to the traditional operating modes required by DVGW G 465-4, such as "Inspection above-ground" and "Measuring bar holes". The...

Metallux has been developing sensors for over 35 years: pressure measuring cells, pressure transmitters as well as potentiometers and membrane sensors to determine an angular or linear position.

The pressure transmitter DMK 351 has been specially designed for applications in plant and machine engineering as well as laboratory techniques and is suitable for measuring small system pressure and filling heights. By using our own-developed capacitive sensor, optionally available as AI2O3 99.9%, the DMK 351 offers a high overpressure resistance and a high temperature and media resistance. The pressure transmitter is available in an intrinsically safe version for a use in explosive environments. Features: — nominal pressure: 0 ... 40 mbar up to 0 ... 20 bar — accuracy: 0.35 % (opt. 0.25 %) FSO — high media resistance Optional Features: — IS-Version (temperature class T4) Ex ia = intrinsically safe for gases and dusts — IS-version (temperature class T6) — diaphragm (99.9 % AI2O3) — customer specific versions

The pressure transmitter DMK 387 has been specially designed for applications in plant and machine engineering as well as laboratory techniques and is suitable for measuring small system pressure and filling heights. By using our own-developed capacitive sensor, available in AI2O3 99.9%, the DMK 387 offers a high overpressure resistance and a high temperature and media resistance. The pressure transmitter is available in an intrinsically safe version for usage in explosive environments. Product characteristics: — Nominal pressure from 0 ... 100 mbar up to 0 ... 60 bar — Output signal: 2-wire: 4 ... 20 mA / 3-wire and others on request — diaphragm ceramics 99.9 % Al2O3 — accuracy: 0.35 % (opt. 0.25 %) FSO Optional features — IS-version Ex ia = intrinsically safe for gases and dust — different kinds of inch threads — pressure port in PVDF or PP-HT for aggressive media

The pressure transmitter DMK 458 has been developed for marine and offshore applications. In addition to thread connections, different flush versions are available, which are especially suitable for pasty, viscous, and polluted media. Due to the capacitive ceramic sensor developed by BD\SENSORS, which is optionally available in Al2O3 99.9 %, the DMK 458 shows an outstanding accuracy as well as a high overload and temperature resistance. Features: — nominal pressure: 0 ... 40 mbar up to 0 ... 20 bar — accuracy: 0.25 % (opt. 0.1 %) FSO — shipping approvals: American Bureau of Shipping (ABS), Bureau Veritas (BV), China Classification Society (CCS), Det Norske Veritas (DNV), Germanischer Lloyd (GL), Lloyd's Register (LR) — high overpressure resistance — excellent accuracy — accuracy: 0.25 % (opt. 0.1 %) FSO Optional Features: — IS-Version Ex ia = intrinsically safe for gases and dusts — diaphragm AI2O3 99.9 %

BD\SENSORS has developed the LMK 307T for continuous level and temperature measurement in water or waste water applications. The advantage: simultaneous recording of level and temperature with separate independent signal amplification. The maintenance and wiring costs are considerably reduced. In addition to classical signal processing of the level, an additional signal circuit independent of the level which converts the temperature signal into a 4 ... 20 mA analogue signal in 2-wire technology is provided. Features: — nominal pressure: from 0 ... 4 mH2O up to 0 ... 250 mH2O — nominal temperature from 0 ... 30 °C up to 0 ... 70 °C — accuracy: 0.5 % FSO — diameter 27 mm — separate output signals for pressure and temperture ranges — excellent accuracy — easy handling — low maintenance and wiring costs Optional Features: — different kinds of cables — different kinds of seal materials — customer specific versions

The precise pressure transmitter x\act ci measures the pressure of gases, steam and fluids. The special-developed capacitive ceramic sensor for this transmitter, which can optionally be delivered in pure ceramic, has a high overpressure capability and excellent media stability. Several process connections e.g. inch thread or hygienic versions like Varivent, dairy pipe or Clamp are available. The robust stainless steel globe housing has a high ingress protection IP 67 and all characteristics for a residue-free and antibacterial cleaning. Features: — nominal pressure: 0 .. 160 mbar up to 0 .. 20 bar — accuracy: 0.1 % FSO — turn-down 1:5 — hygienic version — flush mounted, capacitive ceramic sensor — several process connections (inch thread, Clamp, ...) — with integrated display and operating module — diaphragm Al2O3 (99.9 %) Optional: — IS-Version Ex ia = intrinsically safe for gases and dusts — HART®-communication

The pressure transmitter DCT 553P is used in the food and pharmaceutical industries or in applications where a dead space-free process connection is required. A capacitive ceramic pressure sensor developed in-house is used as the basic sensor, which is characterized by a high overload and excellent surface quality. The special design prevents the formation of condensation inside the pressure transmitter and thus failure in applications with large temperature changes. The integrated, standardised IO-Link interface increases productivity and supports the operator in service and maintenance. Features: — nominal pressure: 0 ... 40 mbar up to 0 ... 20 bar — accuracy: 0.35% (opt. 0.25%) FSO — IO-Link acc. to specification V1.1 — Data transfer 38.4 kBaud — Smart sensor profile — hygienic version — protection IP 67/ IP 69 — high overpressure resistance — diaphragm ceramics Al2O3 (99.9 %) Optional: — different process connections

The precise pressure transmitter x\act ci measures the pressure of gases, steam and fluids. The special-developed capacitive ceramic sensor for this transmitter, which can optionally be delivered in pure ceramic, has a high overpressure capability and excellent media stability. Several process connections e.g. inch thread or hygienic versions like Varivent, dairy pipe or Clamp are available. The robust stainless steel globe housing has a high ingress protection IP 67 and all characteristics for a residue-free and antibacterial cleaning. Features: — nominal pressure: 0 .. 160 mbar up to 0 .. 20 bar — accuracy: 0.1 % FSO — turn-down 1:5 — hygienic version — flush mounted, capacitive ceramic sensor — several process connections (inch thread, Clamp, ...) — with integrated display and operating module — diaphragm Al2O3 (99.9 %) Optional: — IS-Version Ex ia = intrinsically safe for gases and dusts — HART®-communication

The pressure transmitter DMK 351P has been designed for measuring small system pressure in the food industry and chemical industry. The DMK 351P is based on an own-developed capacitive ceramic sensor element. It features high overpressure resistance and high resistance against most of aggressive media. A variety of different process and electrical connections and an intrinsically safe version complete the range of possibilities. Features: — nominal pressure: 0 ... 40 mbar up to 0 ... 20 bar — accuracy: 0,35 % (opt. 0,25 %) FSO — hygienic version — high overpressure capability — several process connections (G1" cone, Clamp, dairy pipe, etc.) (G 1/2, dairy pipe, clamp, etc.) Optional Features: — IS-Version Ex ia = intrinsically for gases and dusts — diaphragm AI2O3 99.9 % — customer specific versions e.g. special pressure ranges

The screw-in transmitter LMK 351 has been designed for measuring small system pressure and level measurement in container. The LMK 351 is based on an own-developed capacitive ceramic sensor element. Usage in viscous and pasty media is possible because of the flush mounted sensor. For the usage in aggressive media a pressure port in PVDF and the diaphragm in AI2O3 99.9 % is available. An intrinsically safe version complete the range of possibilities. Features — nominal pressure: 0 ... 40 mbar up to 0 ... 20 bar — accuracy: 0.35 % (opt. 0.25 %) FSO — pressure port G 1 1/2" for pasty and polluted media Optional Features — IS-version Ex ia = intrinsically for gases and dusts — pressure port PVDF for aggressive media — diaphragm pure ceramic (99,9 % Al2O3) — customer specific versions

We have newly developed temperature sensor for vaccine storage. This sensor can measure up to -80℃. Suitable for temperature control such as low temperature transportation of vaccines. Compliant with JISC 1604-1997 High temperature accuracy / Class B (±0.3℃ at 0℃） Please contact the following for details. E-mail sensor@tateyama.or.jp

We have newly developed an Thermistor sensor for Automotive. This is suitable for measurement of EV and HEV motors and batteries temp. It has begun to be widely adopted by Japanese automobile manufacturers. It can also be used for various other purposes. Please contact the following for details. E-mail sensor@tateyama.or.jp

We have newly developed an thermistor sensor for Automotive. This is suitable for measurement of EV and HEV motors and batteries temp. It has begun to be widely adopted by Japanese automobile manufacturers. It can also be used for various other purposes. Please contact the following for details. E-mail sensor@tateyama.or.jp

The largest sales share of Si sensors in Japan We offer a wide range of temperature sensors that contribute to safety, security and environment based on materials, processing and automation technology. And we have the significant market share of highly reliable Si sensor developed with our original technology and mounted on gas stove burner.

Sensor-controlled bevelling system for automated welding seam preparation of flat steel plates. The stable portal construction including application-oriented design of the cutting head supports all types of upper side or bottom side cuts with sensor-controlled online edge tracking. A laser camera measures the workpiece position and tracks along the upper edge, ensuring the requested land heights with a tolerance of +/- 0.5 mm even compensating heat distortion. The system processes the required bevels, which are defined by simply clicking and inserting the geometry parameters in a CAD drawing of the component, with the specially developed software. Sensor supported systems can be provided with the igm ibs oxy and plasma cutting machine which are optimized for all mechanical and control requirements for chamfering flat sheet metal. This special characteristic was made possible by the development of a parallelogram-like cutting head, on which the cutting torche, movable in two axes,...

Lenord+Bauer has developed a speed sensor for applications in which high demands are made on drive efficiency and driving comfort. In the GEL 2477, robustness and reliability have been combined with higher resolution. • Sensor with pulse multiplier • High resolution through pulse multiplier (2, 4, and 8fold) • Spacesaving sensor in a compact design • Easy flange mounting

The SenseCeiver Wireless Sensor Gateway has been developed specifically for industrial 4-20mA sensors and by using energy-saving components excellent energy efficiency was achieved. It has thanks to its optimized hardware and software a particularly long battery life and also enables a solar operation. Measure and monitor via the galvanic isolated electrically input for sensors everything you need for your IoT applications. Wireless Sensor Gateway has an additional 12V battery connector to also be able to supply the industrial sensor with voltage. Data can be sent by SMS or GPRS to a device of your choice or to a cloud. It uses a dual-band GPRS modem. The Wireless Sensor Gateway can reach up to 6 months continuous operation on battery power with a 1.35AH battery under optimum working conditions. The Wireless Sensor Gateway switches to sleep mode after sending data which is controlled by a Microchip PIC. The data are sent at preset intervals via HTTP or SMS. The Wireless Sensor...

The Wireless Sensor Gateway has been developed specifically for industrial 4-20mA sensors and by using energy-saving components excellent energy efficiency was achieved. It has thanks to its optimized hardware and software a particularly long battery life and also enables a solar operation. Measure and monitor via the galvanic isolated electrically input for sensors everything you need for your IoT applications. Wireless Sensor Gateway has an additional 12V battery connector to also be able to supply the industrial sensor with voltage. Data can be sent by SMS or GPRS to a device of your choice or to a cloud. It uses a dual-band GPRS modem. The Wireless Sensor Gateway can reach up to 6 months continuous operation on battery power with a 1.35AH battery under optimum working conditions. The Wireless Sensor Gateway switches to sleep mode after sending data which is controlled by a Microchip PIC. The data are sent at preset intervals via HTTP or SMS. The Wireless Sensor Gateway can be...